Publikationen

Zeitschriften/Aufsätze (reviewed)

  • Blankemeyer, S.; Kolditz, T.; Busch, J.; Seitz, M.; Nyhuis, P.; Raatz, A. (2022): Adaptive aerodynamic part feeding enabled by genetic algorithmProd. Eng. Res. Devel. 16, 1–8 (2022)
    DOI: https://doi.org/10.1007/s11740-021-01076-w
  • Bossemeyer, H., Ahlborn, P., Kästner, M., Reithmeier, E.: (2022): Calibration of focus-adjustable cameras for triangulation sensors by model-based camera parameter estimationtm – Technisches Messen (2022), S. 1-8. | Datei |
    DOI: https://doi.org/10.1515/teme-2022-0023
  • Breidenstein, B., Denkena, B., Bergmann, B., Wolters, P., Picker, T.: (2022): Turning Copper and Aluminum Alloys with Natural Rocks as Cutting Toolsmaterials (2022), Vol. 15, Nr. 5, 12 Seiten. | Datei |
    DOI: https://doi.org/10.3390/ma15062187
    ISSN: 1996-1944
  • Budde, L., Prasanthan, V., Merkel, P., Kruse, J., Faqiri, M. Y., Lammers, M., Kriwall, M., Hemsdorf, J., Stonis, M., Hassel, T., Breidenstein, B., Behrens, B.-A., Denkena, B., Overmeyer, L.: (2022): Material dependent surface and subsurface properties of hybrid componentsProduction Engineering (2022), 13 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s11740-022-01128-9
  • Dänekas, C., Heikebrügge, S., Schubnell, J., Schaumann, P., Breidenstein, B., Bergmann, B.: (2022): Influence of deep rolling on surface layer condition and fatigue life of steel welded jointsInternational Journal of Fatigue 162 (2022), 13 Seiten.
    DOI: https://doi.org/10.1016/j.ijfatigue.2022.106994
  • Denkena, B., Bergmann, B., Fromm, A., Klose, C., Hansen, N.: (2022): Influence of the atmosphere and temperature on the properties of the oxygen‑affine bonding system titanium‑diamond during sinteringThe International Journal of Advanced Manufacturing Technology (2022), 10 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s00170-022-09171-7
  • Denkena, B., Bergmann, B., Geschwind, T.: (2022): Die Porosität eines Schleifwerkzeugs schon beim Mischen einstellenWT WerkstattsTechnik BD. 112 (2022), Nr. 3, S. 191-195. | Datei |
    DOI: 10.37544/1436–4980–2021–3–89
  • Denkena, B., Bergmann, B., Raffalt, D.: (2022): Operational behaviour of graded diamond grinding wheels for end mill cutter machiningSN Applied Sciences (2022), 10 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s42452-022-04970-9
  • Denkena, B., Bergmann, B., Worpenberg, S.: (2022): Simulation‑based design of flank face modification for the milling of Ti‑6Al‑4V and Inconel 718The International Journal of Advanced Manufacturing Technology (2022), 12 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s00170-022-09016-3
  • Denkena, B., Breidenstein, B., Bergmann, B., Wolters, P.: (2022): Investigation of the material separation behaviour of rocks using scratch tests for the design of tool grinding processesSN Applied Sciences (2022), 17 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s42452-022-05038-4
  • Denkena, B., Klemme, H., Becker, J., Blech, H.: (2022): User-Specifc Parameterization of Process Monitoring SystemsProduction Engineering (2022, online 16. April 2022), 8 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s11740-022-01130-1
  • Denkena, B., Krödel, A., Wilckens, M.: (2022): Process limits in high‑performance peel grinding of hardened steel components with coarse CBN grinding wheelsThe International Journal of Advanced Manufacturing Technology (2022, online), 12 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s00170-022-09026-1
  • Denkena, B., Krödel-Worbes, A., Müller-Cramm, D.: (2022): Wear‑adaptive optimization of in‑process conditioning parameters during face plunge grinding of PcBNScientifc Reports (2022), 11 Seiten. | Datei |
    DOI: https://doi.org/10.1038/s41598-022-05066-5
  • Denkena, B., Wichmann, M., Heide, K. M., Räker, R.: (2022): Laser Scanning Based Object Detection to Realize Digital Blank Shadows for Autonomous Process Planning in MachiningJournal of Manufacturing and Materials Processing (2022), 6, 1, 16 Seiten. | Datei |
    DOI: https://doi.org/10.3390/jmmp6010001
  • Denkena, B., Wichmann, M., Kettelmann, S., Matthies, J., Reuter, L.: (2022): Ecological Planning of Manufacturing Process Chainssustainability (2022), Vol. 14, Nr. 5, 17 Seiten. | Datei |
    DOI: https://doi.org/10.3390/su14052681
  • Denkena, B., Wichmann, M., Reuter, L.: (2022): Kostenvorteile durch adaptive PrüfplanungZWF (2022), Band 117, Nr. 4, S. 178-181. | Datei |
  • Dér. A.; Hingst, L.; Nyhuis, P.; Herrmann, C. (2022): A review of frameworks, methods and models for the evaluation and engineering of factory life cyclesAdvances in Industrial and Manufacturing Engineering
    DOI: https://doi.org/10.1016/j.aime.2022.100083
  • Dörfler K., Dielemans G., Lachmayer L., Recker T., Raatz A., Lowke D., Gerke M. (2022): Additive Manufacturing using mobile robots: Opportunities and challenges for building constructionCement and Concrete Research, Vol. 158, 106772
    DOI: https://doi.org/10.1016/j.cemconres.2022.106772
    ISSN: 0008-8846
  • F. Bittner, H.-J. Endres (2022): µCT-Based Topography Analysis of Inaccessible Surfaces Exemplified by a Biofouling-Covered Plastic Chemie Ingenieur Technik, 94, S. 186-193
    DOI: 10.1002/cite.202100170
  • Fricke, L. V., Gerstein, G., Kotzbauer, A., Breidenstein, B., Barton, S., Maier, H. J.: (2022): High Strain Rate and Stress-State-Dependent Martensite Transformation in AISI 304 at Low TemperaturesMetals (2022), 12, 747, 15 Seiten. | Datei |
    DOI: https://doi.org/10.3390/met12050747
  • Fricke, L. V., Nguyen, H. N., Appel, J., Breidenstein, B., Maier, H. J., Zaremba, D., Barton, S.: (2022): Characterization of deformation-induced martensite by cryogenic turning using eddy current testing6th CIRP Conference on Surface Integrity, Procedia CIRP 108 (2022), S. 49–54. | Datei |
    DOI: 10.1016/j.procir.2022.03.014
  • Gerken, J. F., Klages, N., Biermann, D., Denkena, B.: (2022): Development and analysis of a mechatronic system for in-process monitoring and compensation of straightness deviation in BTA deep hole drillingMechanical Systems and Signal Processing 170 (2022), 19 Seiten. | Datei |
    DOI: https://doi.org/10.1016/j.ymssp.2022.108838
  • Heikebrügge, S., Breidenstein, B., Bergmann, B., Dänekas, C., Schaumann, P.: (2022): Experimental and Numerical Investigations of the Deep Rolling Process to Analyze the Local Deformation Behavior of Welded JointsJournal of Manufacturing and Materials Processing (2022), 6,50, 12 Seiten. | Datei |
    DOI: https://doi.org/10.3390/jmmp6030050
  • Heikebrügge, S., Ottermann, R., Breidenstein, B., Wurz, M. C., Dencker, F.: (2022): Residual Stresses from Incremental Hole Drilling Using Directly Deposited Thin Film Strain GaugesExperimental Mechanics (2022, online), 13 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s11340-022-00822-0
  • Hingst, L.; Wecken, L.; Brunotte, E.; Nyhuis, P. (2022): Classification of Robustness and Resilience in ChangeabilityJournal of Production Systems and Logistics 2 (2022), 3.
    DOI: https://doi.org/10.15488/11714
  • Keitel, M., Denkena, B., Krödel-Worbes. A.: (2022): Grinding Strategies for Local and Stress Orientated Subsurface Modification of Sheet-Bulk Metal Forming ToolsIndustrial Colloquium of the Transregional Collaborative Research Centre 73; TCRC73 2020: Sheet Bulk Metal Forming (2022, online), S. 286-306.
    DOI: 10.1007/978-3-030-61902-2_13
  • Kellenbrink, C., Nübel, N., Schnabel, A., Gilge, P., Seume, J. R., Denkena, B., Helber, S: (2022): A regeneration process chain with an integrated decision support system for individual regeneration processes based on a virtual twinInternational Journal of Production Research (2022, online), 22 Seiten. | Datei |
    DOI: 10.1080/00207543.2022.2051089
  • L. Veltmaat, F. Mehrens, H.-J. Endres, J. Kuhnert, P. Suchde (2022): Mesh-free simulations of injection molding processesPhysics of Fluids 34
    DOI: 10.1063/5.0085049
  • Mütze, A.; Lucht, T.; Nyhuis, P. (2022): Logistics-oriented Production Configuration Using the Example of MRO Service ProvidersIEEE Access, 10 (2022), S. 20328 - 20344
    DOI: 10.1109/ACCESS.2022.3146420
    ISSN: 2169-3536
  • Pape, F., Liu, H., Ellersiek, L., Krödel, A., Denkena, B., Poll, G.: (2022): Influence of Metal Working Fluids in Cutting ProcessesDefect and Diffusion Forum (2022), Vol. 414, S. 51-57. | Datei |
    ISSN: 1662-9507
  • Park, Y.-B.; Papke, L.; Nyhuis, P. (2022): Development Of A Software-based Tool For Factory Communication Structure Evaluation In The Context Of Industry 4.0Journal of Production Systems and Logistics 2 (2022)
    DOI: https://doi.org/10.15488/11715
    ISSN: 2702-2587
  • S.E. Thürer, K. Peters, T. Heidenblut, N. Heimes, J. Peddinghaus, F. Nürnberger, B.-A. Behrens, H.J. Maier and C. Klose (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished ProductsMaterials 15 | Datei |
    DOI: 10.3390/ma15051692
  • Schäfer, S. F.; Gorke, N. T.; Cevirgen ,C.; Park, Y.-B.; Nyhuis, P. (2022): Elemente der „Fabrik der Zukunft“ Teil 1: Digitale Fabrik, Industrie 4.0 und BIMZWF 117 (2022) 1–2
    DOI: 10.1515/zwf-2022-1002
    ISSN: 2511-0896
  • Schäfer, S. F.; Gorke, N. T.; Cevirgen ,C.; Park, Y.-B.; Nyhuis, P. (2022): Elemente der „Fabrik der Zukunft“ Teil 2: Digitale Fabrik, Industrie 4.0 und BIMZWF 117 (2022) 3
    DOI: https://doi.org/10.1515/zwf-2022-1029
    ISSN: 0947-0085
  • Schäfer, S. F.; Hingst, L.; Hook ,J.; Rieke, L.; Nyhuis, P. (2022): Improving The Planning Quality Through Model-Based Factory Planning In BIMJournal of Production Systems and Logistics, Volume 2 | Article 9
    DOI: https://doi.org/10.15488/12041
    ISSN: 2702-2587
  • V. Venkatachalam, M. Pohler, S. Spierling, L. Nickel, L. Barner, H.-J. Endres (2022): Design for Recycling Strategies Based on the Life Cycle Assessment and End of Life Options of Plastics in a Circular EconomyMacromolecular Chemistry and Physics, 0(0):2200046
    DOI: 10.1002/macp.202200046
    ISSN: 1022-1352
  • Y. Celik, M. Shamsuyeva, H.-J. Endres (2022): Thermal and Mechanical Properties of the Recycled and Virgin PET - Part IPolymers 14, Nr. 7, S. 1326
    DOI: 10.3390/polym14071326
  • Aldakheel, F.; Behrens, B.-A.; Böhm, C.; Chugreeva, A.; Ince, C.-V.; Raatz, A.; Uhe, J.; Wriggers, P.; (2021): A design concept of active cooling for tailored forming workpieces during induction heatingProd. Eng. Res. Devel. 15, 177–186 | Datei |
    DOI: 10.1007/s11740-021-01027-5
  • Ast, J.; Wasseghi, R.; Nyhuis, P. (2021): A comparison of methods for determining performance based employee deployment in production systemsProduction Engineering Research Development
    DOI: https://doi.org/10.1007/s11740-021-01019-5
  • Aurich, P.; Stonis M.; Overmeyer, L. (2021): Layoutoptimierung für kleinskalige modulare FörderanlagenZeitschrift für wirtschaftlichen Fabrikbetrieb
    DOI: 10.1515/zwf-2021-0048
  • B. Kötter, J. Endres, J. Körbelin, F. Bittner, H.-J. Endres, B. Fiedler (2021): Fatigue and fatigue after impact behaviour of Thin- and Thick-Ply composites observed by computed tomographyComposites Part C: Open Access, 5, 100139
    DOI: 10.1016/j.jcomc.2021.100139
  • B.-A. Behrens, J. Schröder, H. Wester, D. Brands, S. Uebing und C. Kock (2021): Experimental and numerical investigations on the development and stability of residual stresses arising from hot forming processes13th International Conference on Technology of Plasticity (ICTP) | Datei |
  • Banerjee, S.S.; Arief, I.; Berthold, R.; Wiese, M.; Bartholdt, M.; Ganguli, D.; Mitra, S.; Mandal, S.; Wallaschek, J.; Raatz, A.; Heinrich, G.; Das, A. (2021): Super-elastic ultrasoft natural rubber-based piezoresistive sensors for active sensing interface embedded on soft robotic actuatorApplied Materials Today, 25
    DOI: 10.1016/j.apmt.2021.101219
  • Behrens, B.-A., Brunotte, K., Wester, H., Kock, C. (2021): Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite element simulationArch Appl Mech | Datei |
    DOI: 10.1007/s00419-021-01928-y
  • Behrens, B.-A., Maier, H. J., Poll, G., Overmeyer, L., Wester, H., Uhe, J., Hassel, T.; Pape, F.; Lammers, M.; Hermsdorf, J.; Kaierle, S.; Budde, L.; Saure, F.; Mildebrath, M.; Coors, T.; Faqiri, M. Y.; Büdenbender, C. (2021): Influence of degree of deformation on welding pore reduction in high-carbon steelsProduction Engineering | Datei |
    DOI: 10.1007/s11740-020-01009-z
  • Behrens, B.-A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S., Kock, C. (2021): Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und MikroskalaForschung im Ingenieurwesen | Datei |
    DOI: 10.1007/s10010-021-00482-x
  • Behrens, B.-A., Uhe, J. (2021): Introduction to tailored formingProduction Engineering | Datei |
    DOI: 10.1007/s11740-021-01022-w
  • Behrens, B.-A.; , Rosenbusch, D.; Wester, H.; and Stockburger, E. (2021): Material Characterization and Modeling for Finite Element Simulation of Press Hardening with AISI 420CJournal of Materials Engineering and Performance
    DOI: 10.1007/s11665-021-06216-y
  • Behrens, B.-A.; Brunotte, K.; Hübner, S.; Wester, H.; Müller, F.; Müller, P.; Wälder, J.; Matthias, T. (2021): Development of Wear Calculation and Wear Reduction in Cold Forging Processes.J. Manuf. Mater. Process. 2021, 5, 36 | Datei |
    DOI: 10.3390/jmmp5020036
  • Behrens, B.-A.; Brunotte, K.; Petersen, T.; Ostermeyer, C.; Till, M. (2021): Adjusting mechanical properties of forging dies produced by ausforming24th International Conference on Material Forming, ESAFORM 2021, 02.04.2021, Liège, Belgium,
    DOI: 10.25518/esaform21.2697
  • Behrens, B.-A.; Brunotte, K.; Petersen, T.; Relge, R. (2021): Investigation on the Microstructure of ECAP-Processed Iron-Aluminium Alloys | Datei |
    DOI: 10.3390/ma14010219
  • Behrens, B.-A.; Brunotte, K.; Wester, H.; Dykiert, M. (2021): Fracture Characterisation by Butterfly-Tests and Damage Modelling of Advanced High Strength SteelsKey Engineering Materials, Volume 883, 2021, S. 294-302 | Datei |
    DOI: 10.4028/www.scientific.net/KEM.883.294.
  • Behrens, B.-A.; Brunotte, K.; Wester, H.; Rothgänger, M.; Müller, F. (2021): Multi-Layer Wear and Tool Life Calculation for Forging Applications Considering Dynamical Hardness Modeling and Nitrided Layer DegradationMaterials 2021, Vol. 14, Issue 11, 05. Januar 2021
    DOI: 10.3390/ma14010104
  • Behrens, B.-A.; Chugreeva, A.; Heimes, N.; Klose, C.; Maier, H.J.; Thürer, S.E.; Uhe, J. (2021): Process chain for the manufacture of hybrid bearing bushingsProd. Eng. Res. Devel. 15, 137–150 (2021) | Datei |
    DOI: 10.1007/s11740-021-01028-4
  • Behrens, B.-A.; Dröder, K.; Hürkamp, A.; Droß, M.; Wester, H.; Stockburger, E. (2021): Finite Element and Finite Volume Modelling of Friction Drilling HSLA Steel under Experimental ComparisonMaterials, Ausgabe 14 (20), S. 1-17.
    DOI: 10.3390/ma14205997
  • Behrens, B.-A.; Gibmeier, J.; Brunotte, K.; Wester, H.; Simon, N.; Kock, C. (2021): Investigations on Residual Stresses within Hot-Bulk-Formed Components Using Process Simulation and the Contour MethodMetals 2021 | Datei |
    DOI: 10.3390/met11040566
  • Behrens, B.-A.; Poll, G.; Möhwald, K.; Schöler, S.; Pape, F.; Konopka, D.; Brunotte, K.; Wester, H.; Richter, S.; Heimes, N.; (2021): Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer SystemsNanomaterials 2021, 11, 1363 | Datei |
    DOI: 10.3390/nano11061363
  • Behrens, B.-A.; Rosenbusch, D.; Wester, H.; Dykiert, M. (2021): Comparison of different testing approaches to describe the fracture behaviour of AHSS sheets using experimental and numerical investigationsIOP Conference Series: Materials Science and Engineering, Volume 1157, International Deep-Drawing Research Group Conference (IDDRG 2021) 21st June - 2nd July 2021, Stuttgart, Germany | Datei |
    DOI: 10.1088/1757-899X/1157/1/012059
  • Behrens, B.-A.; Uhe, J.; Petersen, T.; Klose, C.; Thürer, S. E.; Diefenbach, J.; Chugreeva, A. (2021): Challenges in the Forging of Steel-Aluminum Bearing BushingsMaterials, 14(4), S. 803. | Datei |
    DOI: 10.3390/ma14040803
  • Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2021): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid ComponentsMetals 2021, Vol. 11, Issue 1, 08. Januar 2021
    DOI: 10.3390/met11010115
  • Behrens, B.-A.; Ursinus, J.; Duran, D.; Matthias, T. (2021): Impact extrusion with pressure superimpositionWT Werkstattstechnik online
    DOI: 10.37544/1436-4980-2021-10-17
  • Behrens, B.-A.; Ursinus, J.; Duran, D.; Uhe, J.; Matthias, T. (2021): Fließpressen mit DrucküberlagerungWT WerkstattsTechnik online 11/12, 2021
    DOI: 10.37544/1436-4980-2021-10-1
  • Bergmann, B., Denkena, B., Beblein, S., Picker, T.: (2021): FE-Simulation Based Design of Wear-Optimized Cutting Edge RoundingsJournal of Manufacturing and Materials Processing, Volume 5 (2021) Issue 4, https://www.mdpi.com/journal/jmmp, 18 Seiten. | Datei |
    DOI: https://doi.org/10.3390/jmmp5040126
  • Bergmann, B., Reimer, S.: (2021): Online adaption of milling parameters for a stable and productive processCIRP Annals - Manufacturing Technology, Vol. 70 (2021), S. 341-344. | Datei |
    DOI: 10.1016/j.cirp.2021.04.086
  • Blankemeyer, S.; Kolditz, T.; Busch, J.; Seitz, M.; Nyhuis, P.; Raatz, A. (2021): Adaptive aerodynamic part feeding enabled by genetic algorithmProd. Eng. Res. Devel., 8 pages
    DOI: 10.1007/s11740-021-01076-w
  • Bluemel, S.; Wippo, V.; Hirt, S.; Staehr, R.; Jaeschke, P.; Kaierle, S.; L. Overmeyer, L. (2021): Joining of thermoplastic carbon fiber reinforced plastic laminates by selective heat input during laser cuttingJournal of Laser Applications 33, 022011
    DOI: 10.2351/7.0000062
  • Böß, V., Denkena, B., Dittrich, M.-A., Malek, T., Friebe, S.: (2021): Dexel‐Based Simulation of Directed Energy Deposition Additive ManufacturingJournal of Manufacturing and Materials Processing, Vol. 5 (2021) 1, S. 1-12. | Datei |
    DOI: 10.3390/jmmp5010009
  • Breidenstein, B., Müller-Cramm, D., Vogel, N.: (2021): Cutting inserts made of glass and glass ceramicsSN Applied Sciences (2021) 3:892, 9 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s42452-021-04887-9
  • Breidenstein, B., Vogel, N., Behrens, H., Dietrich, M., Andersson, J. M.: (2021): Locally Resolved Residual Stress Measurements in (Al,Ti)N Coatings Using Raman SpectroscopyTribology in Industry (2021), 7 Seiten. | Datei |
    DOI: 10.24874/ti.1144.06.21.08
  • Budde, L., Prasanthan, V., Kruse, J., Faqiri, M. Y., Lammers, M., Hermsdorf, J., Stonis, M., Hassel, T., Breidenstein, B., Behrens, B.-A., Denkena, B., Overmeyer, L.: (2021): Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid componentsThe International Journal of Advanced Manufacturing Technology (2021, published online 25. October 2021), 18 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s00170-021-08066-3
  • Budde, L.; Prasanthan, V.; Kruse, J.; Faqiri, M. Y.; Lammers, M.; Hermsdorf, J.; Stonis, M.; Hassel, T.; Breidenstein, B.; Behrens, B.-A.; Denkena, B.; Ludger Overmeyer, L. (2021): Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid componentsInt J Adv Manuf Technol
    DOI: 10.1007/s00170-021-08066-3
  • Budelmann, D., Schmidt, C., Meiners, D.: (2021): Adhesion-cohesion balance of prepreg tack in thermoset automated fiber placement. Part 1: Adhesion and surface wettingComposites Part C, Open Access 6 (2021) 100204, S. 1-12. | Datei |
    DOI: https://doi.org/10.1016/j.jcomc.2021.100204
  • Carlet, M., Hoffmann, D. C., Kruppe, N. C., Brögelmann, T., Bobzin, K., Beblein, S., Krödel, A., Breidenstein, B.: (2021): Qualification of PVD Coatings for Machining Using a Planing Test SetupProceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), 28. September - 01. Oktober 2021, Dresden, S. 301–309. | Datei |
    DOI: https://doi.org/10.1007/978-3-030-78424-9_34
  • Cevirgen, C.; Hook, J.; Nyhuis, P. (2021): Investitionsentscheidungen unter Unsicherheitwt Werkstattstechnik online Jahrgang 111 (2021) Heft 04
    DOI: 10.37544/1436-4980-2021-04
    ISSN: 1436-4980
  • Cevirgen, C.; Rieke, L.; Bischoff, L.-M.; Nyhuis, P. (2021): Investment Feasibility Study for Factory Planning ProjectsJournal of Production Systems and Logistics; Volume 1 | 8
    DOI: https://doi.org/10.15488/11143
  • Denkena, B., Behrens, B.-A., Bergmann, B., Stonis, M., Kruse, J., Witt, M.: (2021): Potential of process information transfer along the process chain of hybrid components for process monitoring of the cutting processProduction Engineering Research and Development (WGP), Volume 15 (2021) Nr. 2, April 2021, S. 199-209. | Datei |
    DOI: 10.1007/s11740-021-01023-9
  • Denkena, B., Bergmann, B., Becker, J., Blech, H.: (2021): Sensorlose Überwachung der EinzelteilfertigungWT Werkstattstechnik, 111 (2021), Nr. 5, S. 305-308 | Datei |
    DOI: DOI 10.37544/1436–4980–2021–05–39
  • Denkena, B., Bergmann, B., Handrup, M., Schmidt, C.: (2021): Controlled turning process for the production of friction-reduced cylinder liners with a defined free-from geometryJournal of Machine Engineering, Vol. 21 (2021) No. 3, S. 47–59. | Datei |
    DOI: https://doi.org/10.36897/jme/139207
    ISSN: 1895-7595
  • Denkena, B., Bergmann, B., Kono, K., Ishiguro, R., Klemme, H.: (2021): CHARACTERIZATION OF HEAT CONDUCTIVITY OF ECCENTRICALLY ROTATING HEAT PIPES USED FOR COOLING OF MOTOR SPINDLESMM Science Journal (Special Issue on ICTIMT 2021), July 2021, S. 4698-4705. | Datei |
    DOI: 10.17973/MMSJ.2021_07_2021078
  • Denkena, B., Bergmann, B., Rahner, B.-H.: (2021): A novel tool monitoring approach for diamond wire sawingProduction Engineering (2021, published online 10. November 2021), 8 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s11740-021-01087-7
  • Denkena, B., Bergmann, B., Schmidt, A.: (2021): Preload monitoring of single nut ball screws based on sensor fusionCIRP Journal of Manufacturing Science and Technology, Vol. 33 (2021), S. 63-70. | Datei |
    DOI: 10.1016/j.cirpj.2021.02.006
  • Denkena, B., Bergmann, B., Schmidtmann, J.-P., Schreiber, P.: (2021): Präzise Mikrostrukturen produktiv fertigenWT Werkstattstechnik BD. 111 (2021) Nr. 11-12, S. 792-795. | Datei |
    DOI: 10.37544/1436–4980–2021–11–12–22
  • Denkena, B., Bergmann, B., Schmidtmann, J.-P.: (2021): Magnetführung in der Optikfertigung - Ein magnetgelagerter Linearaktor ermöglicht adaptive Prozesse in der OptikfertigungZWF, 116 (2021) 5, S. 279-283. | Datei |
    DOI: 10.1515/zwf-2021-0071
  • Denkena, B., Bergmann, B., Schumacher, T.: (2021): Anticipatory Online Compensation of Tool Deflection Using a Priori Information from Process PlanningJournal of Manufacturing and Materials Processing, 5 (2021) 90, 16 Seiten. | Datei |
    DOI: https://doi.org/10.3390/jmmp5030090
  • Denkena, B., Bergmann, B., Stiehl, T. H.: (2021): Transfer of Process References between Machine Tools for Online Tool Condition MonitoringMachines, 9 (2021) 282, 13 Seiten. | Datei |
    DOI: https://doi.org/10.3390/machines9110282
  • Denkena, B., Bergmann, B., Witt, M.: (2021): Feeling Machine for Process Monitoring of Components with Stock AllowanceMachines, 9 (2021) 3, S. 1-11. | Datei |
    DOI: 10.3390/ machines9030053
  • Denkena, B., Breidenstein, B., Dittrich, M.-A., Nguyen, H. N., Fricke, L. V., Maier, H. J., Zaremba, D.: (2021): Effects on the deformation-induced martensitic transformation in AISI 304 in external longitudinal turningAdvances in Industrial and Manufacturing Engineering, Vol. 2 (2021), 8 Seiten. | Datei |
    DOI: 10.1016/j.aime.2021.100044
  • Denkena, B., Breidenstein, B., Krödel, A., Bergmann, B., Picker, T., Wolters, P.: (2021): Suitability of natural rocks as materials for cutting toolsSN Applied Sciences (2022) 4:2, 21 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s42452-021-04883-z
  • Denkena, B., Breidenstein, B., Ventura, Carlos, E.H., Magalhães, Frederico, Abrão, Alexandre M.: (2021): Performance evaluation of the edge preparation of tungsten carbide inserts applied to hard turningThe International Journal of Advanced Manufacturing Technology, Published online 19th January 2021, 13 Seiten. | Datei |
    DOI: doi.org/10.1007/s00170-020-06585-z
  • Denkena, B., Dittrich, M.-A., Fohlmeister, S.: (2021): Selbstoptimierende Reihenfolgebildung in der Fertigung - Selbstoptimierende Reihenfolgebildung in der Werkstattfertigung durch bestärkendes LernenWT Werkstattstechnik, 111 (2021), Nr. 4, S. 212-216. | Datei |
    DOI: 10.37544/1436–4980–2021–04–34
  • Denkena, B., Dittrich, M.-A., Münch, G. V.: (2021): Ontology-based production planning under the consideration of system robustness54th CIRP Conference on Manufacturing Systems, Procedia CIRP 104 (2021), 22.-24. September 2021, Virtual Conference, S. 547-552. | Datei |
    DOI: 10.1016/j.procir.2021.11.092
  • Denkena, B., Dittrich, M.-A., Nguyen, H. N., Bild, K.: (2021): Self‑optimizing process planning of multi‑step polishing processesProduction Engineering Research and Development (WGP), Volume 15 (2021), Juni 2021, S. 563-571. | Datei |
    DOI: 10.1007/s11740-021-01042-6
  • Denkena, B., Dittrich, M.-A., Noske, H., Stoppel, D., Lange, D.: (2021): Data-based ensemble approach for semi-supervised anomaly detection in machine tool condition monitoringCIRP Journal of Manufacturing Science and Technology Vol. 35 (2021), S. 795–802. | Datei |
    DOI: https://doi.org/10.1016/j.cirpj.2021.09.003
  • Denkena, B., Dittrich, M.-A., Stamm, S., Wichmann, M., Wilmsmeier, S.: (2021): Gentelligent processes in biologically inspired manufacturingCIRP Journal of Manufacturing Science and Technology, Vol. 32 (2021), S. 1-15. | Datei |
    DOI: 10.1016/j.cirpj.2020.09.015
  • Denkena, B., Dittrich, M.-A., Wichmann, M., Friebe, S.: (2021): Ressourceneffizientes Umschleifen verschlissener VHM-WerkzeugeWT WerkstattsTechnik Bd. 111 (2021) Nr. 6, S.430-434. | Datei |
    DOI: 10.37544/1436-4980-2021-06-74
  • Denkena, B., Krödel, A., Beblein, S.: (2021): A novel approach to determine the velocity dependency of the friction behavior during machining by means of digital particle image velocimetry (DPIV)CIRP Journal of Manufacturing Science and Technology 32 (2021), S. 81–90. | Datei |
    DOI: https://doi.org/10.1016/j.cirpj.2020.11.007
  • Denkena, B., Krödel, A., Dzierzawa, P.: (2021): Influence of the Sintering Process on Productivity and Energy Efficiency in the Production of Bronze-Bonded Grinding WheelsInternational Journal of Materials Science and Engineering, Vol. 9 (2021) Nr. 4, S. 48-58. | Datei |
    DOI: 10.17706/ijmse.2021.9.4.48-58
  • Denkena, B., Krödel, A., Ellersiek, L.: (2021): Influence of metal working fluid on chip formation and mechanical loads in orthogonal cuttingThe International Journal of Advanced Manufacturing Technology (2022, published online 08. October 2021), 9 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s00170-021-08164-2
  • Denkena, B., Krödel, A., Gartzke, T.: (2021): Process design of a novel combination of peel grinding and deep rollingProduction Engineering (2021, published online 04. December 2021), 10 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s11740-021-01092-w
  • Denkena, B., Krödel, A., Heckemeyer, A.: (2021): Numerical and experimental analysis of thermal and mechanical tool load when turning AISI 52100 with ground cutting edge microgeometriesCIRP Journal of Manufacturing Science and Technology 35 (2021), S. 494–501. | Datei |
    DOI: https://doi.org/10.1016/j.cirpj.2021.08.006
  • Denkena, B., Krödel, A., Heikebrügge, S., Meyer, K., Pillkahn, P.: (2021): Surface topography after deep rolling with milling kinematicsProduction Engineering Research and Development (WGP), Volume 15 (2021), Juni 2021, S. 587-593. | Datei |
    DOI: 10.1007/s11740-021-01031-9
  • Denkena, B., Krödel, A., Heller, C.: (2021): Entwicklung von SeilschleifwerkzeugenWT Werkstattstechnik BD. 111 (2021) NR. 4, S. 265-269. | Datei |
    DOI: 10.37544/1436–4980–2021–04–87
  • Denkena, B., Krödel, A., Lang, R.: (2021): Fabrication and use of Cu-Cr-diamond composites for the application in deep feed grinding of tungsten carbideDiamond & Related Materials, Vol. 120 (2021), S. 1-6. | Datei |
    DOI: https://doi.org/10.1016/j.diamond.2021.108668
  • Denkena, B., Krödel, A., Mücke, A., Ellersiek, L.: (2021): Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulationCIRP Annals - Manufacturing Technology, Vol. 70 (2021), S. 91-94. | Datei |
    DOI: 10.1016/j.cirp.2021.04.013
  • Denkena, B., Krödel, A., Müller-Cramm, D.: (2021): Produktive Schleifbearbeitung von PcBNWT Werkstattstechnik BD. 111 (2021), Nr. 10, S. 740-744 | Datei |
    DOI: 10.37544/1436–4980–2021–10–86
  • Denkena, B., Krödel, A., Pape, O., Mücke, A., Ellersiek, L.: (2021): Identification of rake and flank face engagement parameters using a dexel-based material removal simulation with an oriented sweep volumeCIRP Journal of Manufacturing Science and Technology, Vol. 35 (2021), S. 146-157. | Datei |
    DOI: 10.1016/j.cirpj.2021.06.002
  • Denkena, B., Krödel, A., Raffalt, D.: (2021): Gradierte Schleifscheiben beim NutentiefschliffWT WerkstattsTechnik Bd. 111 (2021) Nr. 11-12, S. 829-832. | Datei |
    DOI: 10.37544/1436-4980-2021-11-12-59
  • Denkena, B., Krödel, A., Relard, A.: (2021): Using tool wear to increase process stability when milling Al7075 and AISI 4140+QTProduction Engineering Research and Development (WGP), published online: 13 May 2021, 11 Seiten. | Datei |
    DOI: 10.1007/s11740-021-01059-x
  • Denkena, B., Krödel, A., Wilckens, M.: (2021): High performance peel grinding of steel shafts using coarse electroplated CBN grinding wheelsProduction Engineering Research and Development (WGP), published online: 31 March 2021, 8 Seiten. | Datei |
    DOI: 10.1007/s11740-021-01047-1
  • Denkena, B., Krödel-Worbes, A., Beblein, S., Hein, M.: (2021): Influence of End Mill Manufacturing on Cutting Edge Quality and Wear BehaviorJournal of Manufacturing and Materials Processing, 5 (2021) 77, 16 Seiten. | Datei |
    DOI: https://doi.org/10.3390/jmmp5030077
  • Denkena, B., Krödel-Worbes, A., Keitel, M., Wolters, P.: (2021): Influence of dressing strategy on tool wear and performance behavior in grinding of forming tools with toric grinding pinsProduction Engineering (2021, published online 02. December 2021), 10 Seiten | Datei |
    DOI: https://doi.org/10.1007/s11740-021-01089-5
  • Denkena, B., Kuhlemann, P., Breidenstein, B., Keitel, M., Vogel, N.: (2021): Influence of Turn-Rolling on the Residual Stresses and Microstructure of C45E and the Effects on Fatigue Life under Cyclic LoadingHTM, J. Heat Treatm. Mat., 76 (2021) 3, S. 195-204. | Datei |
    DOI: 10.1515/htm-2021-0003
  • Denkena, B., Robak, S., Thiem, S.: (2021): Praxisbericht: Gestaltung einer Online-Lernplattform über die Digitalisierung in der Produktion unter Verwendung von OER-BildungsmaterialienJournal of Technical Education (JOTED), 9 (2021) 1, S. 128-154. | Datei |
    ISSN: 2198-0306
  • Denkena, B., Schinkel, F., Pirnay, J., Wilmsmeier, S.: (2021): Quantum algorithms for process parallel flexible job shop schedulingCIRP Journal of Manufacturing Science and Technology, Vol. 33 (2021), S. 100-114. | Datei |
    DOI: 10.1016/j.cirpj.2021.03.006
  • Denkena, B., Schmidt, C., Kaczemirzk, M., Schwinn, M.: (2021): Influence of a Dynamic Consolidation Force on In Situ Consolidation Quality of Thermoplastic Composite LaminateJournal of Composites Science, Vol. 5 (2021) 3, 12 Seiten. | Datei |
    DOI: 10.3390/jcs5030088
  • Denkena, B., Schmidt, C., Timmermann, M., Friedel, A.: (2021): An optical‑fow‑based monitoring method for measuring translational motion in infrared‑thermographic images of AFP processesProduction Engineering (2021, punlished online, 19. October 2021), 10 Seiten. | Datei |
    DOI: https://doi.org/10.1007/s11740-021-01084-w
  • Denkena, B., Schmidt, C., Werner, S., Schwittay, D.: (2021): Development of a Shape Replicating Draping Unit for Continuous Layup of Unidirectional Non-Crimp Fabrics on Complex Surface GeometriesJournal of Composites Science, Vol. 5 (2021) 4, 13 Seiten. | Datei |
    DOI: 10.3390/jcs5040093
  • Dittmar, H.; Beier, C. J. A.; Weiland, J.; Schiebahn, A.; Jaeschke, P.; Kaierle, S.; Reisgen, U.; Overmeyer, L. (2021): Individualized and controlled laser beam pre-treatment process for adhesive bonding of fiber-reinforced plastics. III. Effects of contaminantsJournal of Laser Applications 33, 042051
    DOI: 10.2351/7.0000466
  • Dittmar, H.; Weiland, J.; Wippo, V.; Schiebahn, A.; Jaeschke, P.; Kaierle, S.; Reisgen, U.; Overmeyer, L. (2021): Individualized and controlled laser beam pretreatment process for adhesive bonding of fiber-reinforced plastics. II. Automatic laser process control by spectrometryJournal of Laser Applications 33, 012004
    DOI: 10.2351/7.0000301
  • Dittrich, M.-A., Fohlmeister, S.: (2021): A deep q‑learning‑based optimization of the inventory control in a linear process chainProduction Engineering Research and Development (WGP), 15 (2021) 1, S. 35-43. | Datei |
    DOI: 10.1007/s11740-020-01000-8
  • E. Blikra Vea, S. Fabbri, S. Spierling, M. Owsianiak (2021): Inclusion of multiple climate tipping as a new impact category in life cycle assessment of polyhydroxyalkanoate (PHA)-based plasticsScience of The Total Environment
    DOI: 10.1016/j.scitotenv.2021.147544
  • Evertz, A.; Schrein, D.; Olsen, E.; Hoffmann, G.-A.; Overmeyer, L. (2021): Dip coating of thin polymer optical fibersOptical Fiber Technology, Volume 66, 102638
    DOI: 10.1016/j.yofte.2021.102638
  • Felix Wellmann, Nina Bode, Peter Wessels, Ludger Overmeyer, Jörg Neumann, Benno Willke, and Dietmar Kracht (2021): Low noise 400 W coherently combined single frequency laser beam for next generation gravitational wave detectorsOptics Express Vol. 29, Issue 7, pp. 10140-10149
    DOI: 10.1364/OE.420350
  • Franceschi, A., Stahl, J., Kock, C., Selbmann, R., Ortmann-Ishkina, S., Jobst, A., Merklein, M., Kuhfuß, B., Bergmann, M., Behrens, B.-A., Volk, W., Groche, P. (2021): Strategies for residual stress adjustment in bulk metal formingArch Appl Mech | Datei |
    DOI: 10.1007/s00419-021-01903-7
  • Fricke, L.V., Gerstein, G., Breidenstein, B., Nguyen, H.N., Dittrich, M.-A., Maier, H.J., Zaremba, D.: (2021): Deformation-induced martensitic transformation in AISI304 by cryogenic machiningMaterials Letters, Vol. 285 (2021), 4 Seiten. | Datei |
    DOI: 10.1016/j.matlet.2020.129090
  • Gerdes, N.; Hoff, C.; Hermsdorf, J.; Kaierle S.; Overmeyer L. (2021): Hyperspectral imaging for prediction of surface roughness in laser powder bed fusionInt J Adv Manuf Technol 115, 1249–1258
    DOI: 10.1007/s00170-021-07274-1
  • Griemsmann, T.; Hoff, C.; Hermsdorf, J.; Kaierle S.; Overmeyer, L. (2021): Eddy current detection of laser-dispersed markers as a new approach to determining the position of load supporting meansJournal of Laser Applications 33, 042004
    DOI: 10.2351/7.0000486
  • Heuer, T.; Maier, J. T.; Schmidt, M.; Nyhuis, P. (2021): Eilaufträge logistisch beherrschenwt Werkstattstechnik online Band 110 (2021) Nr. 4, S. 185-189
    DOI: https://doi.org/10.37544/1436-4980-2021-04-7
  • Hiller, T.; Lucht, T.; Kämpfer, T.; Vinke, L.; Holtsch, P.; Nyhuis, P. (2021): Hybride Lieferzeitprognose: Verbesserte Termin- und Auftragsplanung im volatilen MRO-UmfeldZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Vol. 116, No. 12, S. 882-888.
    DOI: https://doi.org/10.1515/zwf-2021-0197
  • Hiller, T.; Mayerhoff, J.; Nyhuis, P. (2021): Energy Costs In Production Planning And Control: A Categorical Literature Review And Comparative AnalysisJournal of Production Systems and Logistics 1 (2021)
    DOI: https://doi.org/10.15488/11126
  • Hiller, Tobias; Cevirgen, Cihan; Nyhuis, Peter (2021): Exploring The Potential Of Digital Twins For Production Control & MonitoringJournal of Production Systems and Logistics; Volume 1 | Article 5
    DOI: https://doi.org/10.15488/10599
  • Hillnhagen, S.; Green, T.; Maier, J. T.; Mütze, A.; Schmidt, M. (2021): Wirkzusammenhänge innerhalb der Produktionsplanung und -steuerung. Ein Ansatz zur generischen Modellierung der Zusammenhänge zwischen Aufgaben der PPS und produktionslogistischen ZielgrößenZeitschrift für wirtschaftlichen Fabrikbetrieb (116) 12 Weitere Informationen
    ISSN: 2511-0896
  • Hirt, S.; Battmer, J. E.; Wippo, V.; Jaeschke, P.; Kaierle, S.; Overmeyer, L. (2021): Automatically controlled laser-based welding process for repair of CFRP parts
    DOI: 10.2351/7.0000480
  • Hook, J.; Nielsen, L.; Nyhuis, P. (2021): Introduction Of A Concept For Planning And Controlling Multi-Project Environments In FactoriesJournal of Production Systems and Logistics 1; Volume 1 | 9
    DOI: https://doi.org/10.15488/11155
  • Ibrahim, S.; Krause, J. C.; Olbrich, A.; Raatz, A. (2021): Modeling and Reconstruction of State Variables for Low-Level Control of Soft Pneumatic ActuatorsFrontiers in Robotics and AI, Vol. 8, (32 pages)
    DOI: 10.3389/frobt.2021.557830
  • Ince C.-V.; Chugreeva A.; Böhm C.; Aldakheel F.; Uhe J.; Wriggers P.; Behrens B.-A.; Raatz A. (2021): A Design Concept of Active Cooling for Tailored Forming Workpieces During Induction HeatingProd. Eng. Res. Devel. 15, 177–186 (2021)
    DOI: 10.1007/s11740-021-01027-5
  • J. Fottner, D. Clauer, F. Hormes, M. Freitag, T. Beinke, L. Overmeyer, S. N. Gottwald, R. Elbert, T. Sarnow, T. Schmidt, K.-B. Reith, H. Zadek, F. Thomas (2021): Autonomous Systems in Intralogistics – State of the Art and Future Research ChallengesLogistics Research 14:2
    DOI: 10.23773/2021_2
  • J. Körbelin, P. Goralski, B. Kötter, F. Bittner, H.-J. Endres, B. Fiedler (2021): Damage tolerance and notch sensitivity of bio-inspired thin-ply Bouligand structuresComposites Part C: Open Access, 5, 100146
    DOI: 10.1016/j.jcomc.2021.100146
  • Julmi, S.; Abel, A.; Gerdes, N.; Hoff, C.; Hermsdorf, J.; Overmeyer, L.; Klose, C.; Maier, H. J. (2021): Development of a Laser Powder Bed Fusion Process Tailored for the Additive Manufacturing of High-Quality Components Made of the Commercial Magnesium Alloy WE43Materials, 14(4), 887
    DOI: 10.3390/ma14040887
  • Klauer, K., Eifler, M., Kirsch, B., Böß, V., Seewig, J., Aurich, J. C.: (2021): Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulationThe International Journal of Advanced Manufacturing Technology, published online: 16 July 2021, 16 Seiten. | Datei |
    DOI: 10.1007/s00170-021-07629-8
  • Kloft, H.; Gehlen, C.; Dörfler, K.; Hack, N.; Henke, K.; Lowke D.; Mainka, J.; Raatz, A. (2021): TRR 277: Additive manufacturing in constructionCivil Engineering Design 2021; pp. 1–10. (This paper was initially published in German)
    DOI: 10.1002/cend.202100026
  • Kloft, H.; Gehlen, C.; Dörfler, K.; Hack, N.; Henke, K.; Lowke, D.; Mainka, J.; Raatz, A. (2021): TRR 277: Additive Fertigung im BauwesenBautechnik Vol. 98/3; pp. 222-231
    DOI: 10.1002/bate.202000113
  • Kolditz, T.; Raatz, A. (2021): Aerodynamische Zuführtechnik – Fortschritte und PerspektivenZWF, 116 (2021) 11, pp 810--814
    DOI: 10.1515/zwf-2021-0198
  • Kuprat, V. K.; Demke, T. M.; Mütze, A.; Nyhuis, P. (2021): Monetäre Bewertung prozessualer Innovationen. Ansatz zur monetären ex ante Bewertung von Auswirkungen prozessualer Innovationen auf das ProduktionssystemZeitschrift für wirtschaftlichen Fabrikbetrieb (116) 12 Weitere Informationen
    DOI: 10.1515/zwf-2021-0225
    ISSN: 2511-0896
  • L. Pollok, S. Spierling, H.-J. Endres, U. Grote (2021): Social Life Cycle Assessments: A Review on Past Development, Advances and Methodological ChallengesSustainability, 13(18):10286
    DOI: 10.3390/su131810286
  • L. Veltmaat, H.-J. Endres, F. Bittner (2021): Bewertungsmethodik kommerziell erhältlicher Homogenisierungs-Software für die optimierte Simulation des mechanischen Verhaltens kurzfaserverstärkter KunststoffeZeitschrift Kunststofftechnik / Journal of Plastics Technology 17, 3, 129–151 Weitere Informationen
    DOI: 10.3139/O999.01032021
  • Lahdo, R.; Nothdurft, S.; Hermsdorf, J.; Urbanek, P.; Puschmann, M.; Riedel, F.; Overmeyer, L.; Kaierle, S. (2021): Investigations on high-power laser beam-submerged arc hybrid welding of thick duplex stainless steel using laser beam wobblingJournal of Laser Applications 33, 042039
    DOI: 10.2351/7.0000524
  • Leffers, L.; Locmelis, J.; Bremer, K.; Roth B.; Overmeyer, L. (2021): Optical Bend Sensor Based on Eccentrically Micro-Structured Multimode Polymer Optical FibersIEEE Photonics Journal, vol. 13, no. 5, pp. 1-7
    DOI: 10.1109/JPHOT.2021.3111298
  • Leineweber, S.; Sundermann, L.; Bindszus, L.; Overmeyer, L.; Klie, B.; Wittek, H.; Giese, U. (2021): Additive Manufacturing and Vulcanization of Carbon Black-filled Natural Rubber-based ComponentsRubber Chemistry and Technology
    DOI: 10.5254/rct.21.79906
  • Linke, S.; Voß, A.; Ernst, M.; Taschner, P. A.; Baasch, J.; Stapperfend, S.; Gerdes, N.; Koch, J.; Weßels, P.; Neumann, J.; Overmeyer, L.; Stoll E. (2021): Two-Dimensional Laser Melting of Lunar Regolith Simulant Using the MOONRISE Payload on a Mobile Manipulator3D Printing and Additive Manufacturing.ahead of print
    DOI: doi.org/10.1089/3dp.2020.0323
  • Lucht, T.; Drewal, F.; Nyhuis, P. (2021): Approaching Automation of Production Planning and Control: A Theoretical FrameworkJournal of Production Systems and Logistics; Volume 1 | Article 6
    DOI: https://doi.org/10.15488/11127
  • Lucht, T.; Mütze, A.; Kämpfer, T.; Nyhuis, P. (2021): Model-Based Approach for Assessing Planning Quality in Production LogisticsIEEE Access; 2021, Volume 9, S. 115077 - 115089
    DOI: 10.1109/ACCESS.2021.3104717
    ISSN: 2169-3536
  • M. Shamsuyeva, H.-J. Endres (2021): Plastics in the context of the circular economy and sustainable plastics recycling: Comprehensive review on research development, standardization and marketComposites Part C: open access, Vol. 6
  • Motz, M.; Möhle, J.; Lossie, K.; Ast, J.; Rochow, N. E.; Schmitt, R. H.; Nyhuis, P. (2021): Smarte Einsatzplanung und Schulung zur Qualitätssteigerung: Kompetenzgerechte Personaleinsatzplanung und arbeitsgebundene Schulung als Schlüssel zur Qualitätssteigerung in komplexen ProduktionsprozessenZeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 116, no. 12, 2021, pp. 945-950
    DOI: https://doi.org/10.1515/zwf-2021-0213
  • Müller, P.; Hübner, S.; Vogt, H.; Rosenbusch, D.; Behrens, B. (2021): Investigation of the Influence of a Superimposed Oscillated Forming Process on Forming CharacteristicsKey Engineering Materials Vol. 883
  • Nagel, L., Herwig, A., Schmidt, C., Horst, P.: (2021): Numerical Investigation of Residual Stresses in Welded Thermoplastic CFRP StructuresJournal of Composites Science, 5 (2021) 45, 10 Seiten. | Datei |
    DOI: https://doi.org/10.3390/jcs5020045
  • Nielsen L., Klausing P., Nyhuis P. (2021): Towards a Target System to Incorporate Sustainability in Multi-project Management in FactoriesCuevas R., Bodea CN., Torres-Lima P. (eds) Research on Project, Programme and Portfolio Management. Lecture Notes in Management and Industrial Engineering. Springer, Cham.
    DOI: https://doi.org/10.1007/978-3-030-60139-3_2
  • Nyhuis, Peter; Rochow, Niklas E.; Krause, Marilena; Pischke, Dennis; Seitz, Melissa; Kuprat, Vivian K. (2021): Organisationsformen der ProduktionJournal of Production Systems and Logistics 1 (2021), 13.
    DOI: https://doi.org/10.15488/11332
    ISSN: 2702-2587
  • Oleff, A.; Küster, B.; Stonis, M.; Overmeyer, L. (2021): Process monitoring for material extrusion additive manufacturing: a state-of-the-art reviewProg Addit Manuf
    DOI: 10.1007/s40964-021-00192-4
  • Olsen, E.; Overmeyer, L (2021): Laser sintering of copper conductive traces on primer pre-treated additive manufactured 3D surfacesFlex. Print. Electron.6 015006
    DOI: 10.1088/2058-8585/abdbfd
    ISSN: 2058-8585
  • Overmeyer, L.; Olsen, E.; Hoffmann, G.-A. (2021): Additive manufacturing of copper vertical interconnect accesses by laser processing
    DOI: 10.1016/j.cirp.2021.03.006
  • Park, Y.-B.; Nyhuis, P. (2021): Operationalisation Of Communication Structure Requirements In Factories In The Context Of Industry 4.0Journal of Production Systems and Logistics 1 (2021), 17
    DOI: https://doi.org/10.15488/11513
  • Pflieger, K.; Reitz B.; Hoffmann, G.-A.; Overmeyer, L. (2021): Layout optimization for flexographically printed optical networksAppl. Opt. 60, 9828-9836
    DOI: 10.1364/AO.420358
  • Poschke, A.; Jütte, L.; Küster, B.; Stonis, M.; Overmeyer, L. (2021): Augmented Reality basierte Überlagerung von Sichteinschränkungen an FlurförderzeugenLogistics Journal : Proceedings, Vol. 2021
    DOI: 10.2195/lj_Proc_poschke_de_202112_01
  • Prasanthan, V., Denkena, B., Breidenstein, B., Krödel-Worbes, A., Maiß, O.: (2021): Hochdynamisches FestwalzwerkzeugWT Werkstattstechnik BD. 111 (2021) NR. 11-12, S. 851-856. | Datei |
    DOI: 10.37544/1436–4980–2021–11–12–82
  • Reitz, B.; Lotz, C.; Gerdes, N.; Linke, S.; Olsen, E.; Pflieger, K.; Sohrt, S.; Ernst, M.; Taschner, P.; Neumann, J.; Stoll, E.; Overmeyer, L. (2021): Additive Manufacturing Under Lunar Gravity and MicrogravityMicrogravity Science and Technology, 33:25
    DOI: 10.1007/s12217-021-09878-4
  • Rieke, L.; Cevirgen, C.; Nyhuis, P. (2021): Introduction of an Economic Assessment Approach for Factory PlanningJournal of Production Systems and Logistics 1
    DOI: https://doi.org/10.15488/11144
  • Rieke, L.; Schäfer, S. F.; Hingst, L.; Hook, J.; Nyhuis, P. (2021): Weiterentwicklung der digitalen Fabrikplanung durch eine interdisziplinäre Planungsmethodik - Einsatz von BIM in der FabrikplanungWT WERKSTATTSTECHNIK BD. 111 (2021) NR. 11-12
    DOI: doi.org/10.37544/1436-4980-2021-11-12-111
  • Rinne, J.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Overmeyer L. (2021): Investigations on laser welding of dissimilar joints of stainless steel and copper for hot crack preventionJournal of Laser Applications 33, 042042
    DOI: 10.2351/7.0000489
  • S. Raumel, K. Barienti, F. Dencker, M. C. Wurz (2021): Einfluss von Silan-dotierten Umgebungsatmosphären auf die tribologischen EigenschaftenTribologie und Schmierungstechnik
    DOI: DOI: 10.24053/TuS-2021-0002
  • Scandola, L.; Büdenbender, C.; Till, M.; Maier, D.; Ott, M.; Behrens, B.-A.; Volk, W. (2021): Development of a numerical compensation framework for geometrical deviations in bulk metal forming exploiting a surrogate model and computed compatible stressesInternational Journal of Material Forming, 25. Februar 2021
    DOI: 10.1007/s12289-020-01603-7
  • Sleiman, K., Malek, T., Hohnholz, A., Dittrich, M.-A., Jäschke, P., Kaierle, S., Denkena, B., Overmeyer, L.: (2021): Investigation on the temperature dependent morphology of deposited fibers for laser based glass additive manufacturingEngineered Transparency (2021), Glass in Architecture and Structural Engineering John Wiley & Sons, Inc. Berlin (2021), 10 Seiten. | Datei |
  • Sleiman, K.; Rettschlag, K.; Jäschke, P.; Capps, N.; Kinzel, E. C., Overmeyer, L.; Kaierle, S. (2021): Material loss analysis in glass additive manufacturing by laser glass depositionJournal of Laser Applications 33, 042050
    DOI: 10.2351/7.0000482
  • Springer, M.; Düsing, J.; Koch, J.; Jäschke, P.; Kaierle, S.; Overmeyer, L. (2021): Laser-induced forward transfer as a potential alternative to pick-and-place technology when assembling semiconductor componentsJournal of Laser Applications 33, 042030
    DOI: doi.org/10.2351/7.0000525
  • Wienke, A.; Lorenz, L.; Koch, J.; Jäschke, P.; Bock, K.; Overmeyer, L.; Kaierle, S. (2021): Characterization and functionalization of flexographic printing forms for an additive manufacturing process of polymer optical waveguidesJournal of Laser Applications 33, 012017
    DOI: 10.2351/7.0000298
  • Wolf, M.; Rehder, L.; Steinbach, F.; Abt, M.; Hinterding, R.; Overmeyer, L.; Feldhoff, A. (2021): Combination of Laser and Thermal Sintering of Thermoelectric Ca3Co4O9 FilmsChemie Ingenieur Technik
    DOI: 10.1002/cite.202100128
  • Wolff, K. Maier, J. T.; Heuer, T.; Nyhuis, P.; Schmidt, M. (2021): Effects Of Different Order Processing Strategies On Operating Curves Of Logistic Models: A Comparison Of Make-to-Order And Make-to-StockJournal of Production Systems and Logistics 1 (2021), 18
    DOI: https://doi.org/10.15488/11532
  • Zheng, L.; Zywietz, U.; Birr, T.; Duderstadt, M.; Overmeyer, L.; Roth, B.; Reinhardt, C. (2021): UV-LED projection photolithography for high-resolution functional photonic componentsMicrosyst Nanoeng 7, 64
    DOI: 10.1038/s41378-021-00286-7
  • A. Ahrens, J. Moehle, M. Hitzemann, S. Zimmermann (2020): Novel ion drift tube for high-performance ion mobility spectrometers based on a composite materialInt. J. for Ion Mobility Spectrometry, vol. 23, no. 2, pp. 75-81
    DOI: 10.1007/s12127-020-00265-0
  • Abela, A.; Wessarges, Y.; Julmi, S.; Hoff. C.; Hermsdorf, J.; Klose, C.; Maier, H. J.; Kaierle, S.; Overmeyer, L. (2020): Laser powder bed fusion of WE43 in hydrogen-argon-gas atmosphereProcedia CIRP, Volume 94, 2020, Pages 21-24
    DOI: 10.1016/j.procir.2020.09.005
    ISSN: 2212-8271
  • Abt, M.; Wolf, M.; Feldhoff, A.; Overmeyer, L. (2020): Combined spray-coating and laser structuring of thermoelectric ceramicsJournal of Materials Processing Technology, Volume 275, 116319
    DOI: 10.1016/j.jmatprotec.2019.116319
    ISSN: 0924-0136
  • B.-A. Behrens, K. Brunotte, H. Wester und C. Kock (2020): Experimental investigations on the interactions between the process parameters of hot forming and the resulting residual stresses in the componentProcedia Manufacturing, Nr. 50, pp. 706-712 | Datei |
  • Behrens, B. -A.; Diefenbach, J.; Chugreeva, A.; Kahra, C.; Herbst, S.; Nürnberger, F. (2020): Tailored Forming of Hybrid Bevel Gears with Integrated Heat TreatmentProcedia Manufacturing, 47, S. 301-308. | Datei |
    DOI: 10.1016/j.promfg.2020.04.234
  • Behrens, B.-A., Brunotte, K., Wester, H., Müller, F. (2020): Practical Process Characterisation for Hot-Stamping regarding the heat transfer coefficient using a numerical and experimental coupled method29th International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 20 - 22, 2020. | Datei |
    DOI: 10.37904/metal.2020.3522
  • Behrens, B.-A., Maier, H.J., Klose, C., Wester, H., Thürer, S.E., Heimes, N. and Uhe, J. (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-ExtrusionMetals 2020, 10(12), 1582 | Datei |
    DOI: 10.3390/met10121582
  • Behrens, B.-A.: Duran, D.; Matthias, T.; Ross, I.; (2020): Enhancement of the interface of friction welded steel‑aluminium joints | Datei |
    DOI: 10.1007/s11740-020-00994-5
  • Behrens, B.-A.; Brunotte, K.; Özkaya, F.; Wohner, M.; Stockburger, E.; (2020): Extension of the Conventional Press Hardening Process by Local Material Influence to Improve Joining AbilityProcedia Manufacturing, Volume 47, 2020, Pages 1345-1352.
    DOI: 10.1016/j.promfg.2020.04.258
  • Behrens, B.-A.; Brunotte, K.; Wester, H.; Rothgänger, M.; Müller, F. (2020): Multi-Layer Wear and Tool Life Calculation for Forging Applications Considering Dynamical Hardness Modeling and Nitrided Layer Degradation.Materials 2021, 14, 104. | Datei |
    DOI: 10.3390/ma14010104
  • Behrens, B.-A.; Chugreeva, A.; Diefenbach, J.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored FormingMetals, 10(10), S. 1365. | Datei |
    DOI: 10.3390/met10101365
  • Behrens, B.-A.; Hübner, S.; Missal, N.; Vogt, H.; Rosenbusch, D.; Müller, P. (2020): Schwingungsüberlagertes AxialformenWT WerkstattsTechnik 11/12-2020, S.838-843
  • Behrens, B.-A.; Hübner, S.; Müller, P.; Besserer, H.-B.; Gerstein, G.; Koch, S.; Rosenbusch, D. (2020): New Multistage Sheet-Bulk Metal Forming Process Using Oscillating ToolsMetals 2020, 10, 617
  • Behrens, B.-A.; Hübner, S.; Müller, P.; Missal, N.; Vogt, H. (2020): Superimposed OscillationSheet Bulk Metal Forming, (2020), pp. 515-534
  • Behrens, B.-A.; Hübner, S.; Rosenbusch, D.; Müller, P (2020): Investigations of the Influence of a Superimposed Oscillation on the Fatigue StrengthMetals 2020, 10, 1274.
  • Behrens, B.-A.; Hübner, S.; Rosenbusch, D.; Müller, P. (2020): Dynamic Process ForcesSheet Bulk Metal Forming, (2020), pp. 102-126
  • Behrens, B.-A.; Krimm, R.; Höber, A.; (2020): Auslegung von Servopressenantrieben - Entwicklung eines modellbasierten Auslegungstoolswt Werkstattstechnik online, 6-2020
  • Behrens, B.-A.; Maier, H.J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S.E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushingProd. Eng. Res. Devel. 14, 569–581 (2020) | Datei |
    DOI: 10.1007/s11740-020-00992-7
  • Behrens, B.-A.; Matthias, T.; Hübner, S.; Müller, P.; Wester, H.; Wälder, J. (2020): Numerical Calculation of Tool Wear in Industrial Cold Forming Processes Using the Further Development of Wear ModellingSheet Bulk Metal Forming, (2020), pp. 535-552
  • Behrens, B.-A.; Meijer, A.; Stangier, D.; Hübner, S.; Biermann, D.; Tillmann, W.; Rosenbusch, D.; Müller, P. (2020): Static and oscillation superimposed ring compression tests with structured and coated tools for Sheet-Bulk Metal FormingJournal of Manufacturing Processes, Volume 55, pp. 78-86
  • Behrens, B.-A.; Tillmann, W.; Biermann, D.; Hübner, S.; Stangier, D.; Freiburg, D.; Meijer, A.; Koch, S.; Rosenbusch, D.; Müller, P (2020): Influence of Tailored Surfaces and Superimposed-Oscillation on Sheet-Bulk Metal Forming OperationsJ. Manuf. Mater. Process. 2020, 4, 41
  • Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2020): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid ComponentsMetals Special Issue, Springer Verlag 2020 | Datei |
    DOI: 10.3390/met11010115
  • Behrens, B.-A.; Ursinus, J. (2020): Production, Bonding and Application of Metal Matrix Composite Hot Forging Tool ComponentsProcedia Manufacturig Vol. 47
    DOI: 10.1016/j.promfg.2020.04.268
  • Behrens, Bernd-Arno; Volk, Wolfram; Maier, Daniel; Scandola, Lorenzo; Ott, Michael; Kai, Brunotte; Büdenbender, Christoph; Till, Michael (2020): A Combined Numerical and Experimental Investigation on Deterministic Deviations in Hot Forging ProcessesProcedia Manufacturing (Volume 47), S. 295-300, 2020. | Datei |
    DOI: 10.1016/j.promfg.2020.04.231
  • Bergmann, B., Witt, M.: (2020): Feeling machine for material-specific machiningCIRP Annals - Manufacturing Technology, Vol. 69 (2020), S. 353-356. | Datei |
    DOI: 10.1016/j.cirp.2020.04.102
  • Bergmann, B.; Witt, M. (2020): Feeling machine for material-specific machiningCIRP Annals, Volume 69, Issue 1, 2020, Pages 353-356 | Datei |
    DOI: 10.1016/j.cirp.2020.04.102
  • Böß, V., Rust, F., Denkena, B., Dittrich, M.-A.: (2020): Prediction of part distortion in re-contouring processesCIRP Journal of Manufacturing Science and Technology, Vol. 29 (2020), S. 25-35. | Datei |
    DOI: 10.1016/j.cirpj.2020.01.006
  • Bouabid, A., Denkena, B., Breidenstein, B., Krödel, A.: (2020): Influence of the Manufacturing Process on the Local Properties of Bronze-Bonded Grinding ToolsJournal of Manufacturing Science and Engineering, Vol. 142 (2020), S. 061004-1 - 061004-8. | Datei |
    DOI: 10.1115/1.4046744
  • Boyraz, P.; Tappe, S.; Ortmaier, T.; Raatz, A. (2020): Design of a Low-cost Tactile Robotic Sleeve for Autonomous Endoscopes and CathetersMeasurement and Control
    DOI: https://doi.org/10.1177/0020294019895303
  • Breidenstein, B., Busemann, S., Stiesch, M., Greuling, A., Worpenberg, C.: (2020): Influence of surface and subsurface properties on the bonding between yttria stabilized tetragonal zirconia polycrystals and a veneering ceramicJournal of Adhesion Science and Technology, published online: 13 December, 2020, 13 Seiten. | Datei |
    DOI: 10.1080/01694243.2020.1857962
  • Breidenstein, B., Denkena, B., Heckemeyer, A., Beblein, S.: (2020): Correlation between Coating Properties and Thermal Load of CrAlN-Coated Cutting Tools During Machining of AISI4140Defect and Diffusion Forum, Vol. 404 (2020), S. 53-60. | Datei |
    DOI: 10.4028/www.scientific.net/DDF.404.53
    ISSN: 1662-9507
  • Breidenstein, B., Denkena, B., Krödel, A., Prasanthan, V., Poll, G., Pape, F., Coors, T.: (2020): Production-Related Surface and Subsurface Properties and Fatigue Life of Hybrid Roller Bearing ComponentsMetals, Vol. 10 (2020) 10, 17 Seiten. | Datei |
    DOI: 10.3390/met10101339
  • Breidenstein, B., Heikebrügge, S., Schaumann, P., Dänekas, C.: (2020): Influence of the Measurement Parameters on Depth-Resolved Residual Stress Measurements of Deep Rolled Construction Steel using Energy Dispersive X-ray DiffractionHTM, J. Heat Treatm. Mat., 75 (2020) 6, S. 419-432. | Datei |
    DOI: 10.3139/105.110423
  • Breidenstein, B., Vogel, N., Dietrich, M., Behrens, H., Andersson, J. M.: (2020): Residual Stress Measurements in PVD Coatings of Carbide Cutting Tools Directly in the Cutting EdgeDefect and Diffusion Forum, Vol. 404 (2020), S. 61-67. | Datei |
    ISSN: 1662-9507
  • Budelmann, D., Schmidt, C., Meiners, D.: (2020): Prepreg tack: A review of mechanisms, measurement and manufacturing implicationPolymer Composites (Online Library), 41 (2020), S. 3440-3458. | Datei |
    DOI: 10.1002/pc.25642
    ISSN: 1548-0569
  • Cangussu, V. M., Abrão, A. M., De Castro Magalhães, F., Denkena, B., Breidenstein, B., Meyer, K.: (2020): Modelagem e análise numéricas da operação de roleteamento do aço ABNT 4140Revista Matéria, Vol. 25 (2020) Nr. 2, 21 Seiten. | Datei |
    DOI: 10.1590/S1517-707620200002.1065
  • Cevirgen, C.; Bischoff, L.-M.; Heinen, T.; Nyhuis, P. (2020): I4PE - Plattform zur Unterstützung der unternehmensweiten Digitalisierung von KMUJournal of Production Systems and Logistics 1 (2020), Nr. 3.
    DOI: https://doi.org/10.15488/10151
  • Coors, T., Mildebrath, M., Büdenbender, C., Saure, F., Faqiri, M.Y., Kahra, C., Prasanthan, V., Chugreeva, A., Matthias, T., Budde, L., Pape, F., Nürnberger, F., Hassel, T., Hermsdorf, J., Overmeyer, L., Breidenstein, B., Denkena, B., Behrens, B.-A., Maier, H.J., Poll, G.: (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing RacewayMetals, Vol. 10 (2020) 10, 19 Seiten. | Datei |
    DOI: 10.3390/met10101363
  • Coors, T.; Mildebrath, M.; Büdenbender, C.; Saure, F.; Faqiri, M. Y.; Kahra, C.; Prasanthan, V.; Chugreeva, A.; Matthias, T.; Budde, L.; Pape, F.; Nürnberger, F.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Berndstein, B.; Denkena, B.; Behrens, B.-A.; Maier, H. J.; Poll, G. (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing RacewayMetals, 10(10), S. 1363. | Datei |
    DOI: 10.3390/met10101363
  • Demler, E.; Götze, S.; Herbst, S.; Nürnberger, F.; Maier, H. J.; Ursinus, J.; Büdenbender, C.; Behrens, B.-A. (2020): Casting Manufacturing of Cylindrical Preforms Made of Low Alloy SteelsProcedia Manufacturing Vol. 47 (2020)
    DOI: 10.1016/j.promfg.2020.04.333
  • Denkena, B., Abrão, A., Krödel, A., Meyer, K.: (2020): Analytic roughness prediction by deep rollingProduction Engineering Research and Development (WGP), Volume 14 (2020) Number 3, June 2020, S. 345-354. | Datei |
    DOI: 10.1007/s11740-020-00961-0
  • Denkena, B., Bergmann, B., Klemme, H.: (2020): Cooling of motor spindles—a reviewThe International Journal of Advanced Manufacturing Technology, Vol. 110 (2020) 11-12, S. 3273-3294. | Datei |
    DOI: 10.1007/s00170-020-06069-0
  • Denkena, B., Bergmann, B., Rahner, B.-H.: (2020): Die fühlende Seilschleifmaschine - Entwicklung einer kraftgeregelten vollelektrischen mobilen Seilschleifmaschinewt Werkstattstechnik online, 110 (2020) Nr. 9, S. 602-607. | Datei |
  • Denkena, B., Bergmann, B., Reimer, S., Schmidt, A., Stiehl, T., Witt, M.: (2020): KI-gestützte Prozessüberwachung in der ZerspanungZWF, 115 (2020) 5, S. 295-298. | Datei |
    DOI: 10.3139/104.112282
  • Denkena, B., Bergmann, B., Stiehl, T. H.: (2020): Anwenderfreundliche Prozessüberwachungssysteme - Nachvollziehbare und automatische Parametrierung durch aufgabenorientierte Modularisierungwt Werkstattstechnik online, Jahrgang 110 (2020), Nr. 6, S. 435-439. | Datei |
  • Denkena, B., Bergmann, B., Stoppel, D.: (2020): Reconstruction of Process Forces in a Five-Axis Milling Center with a LSTM Neural Network in Comparison to a Model-Based ApproachJournal of Manufacturing and Materials Processing, Vol. 4 (2020) 3, S. 1-13. | Datei |
    DOI: 10.3390/jmmp4030062
  • Denkena, B., Bergmann, B., Witt, M.: (2020): Feeling Machine for Process Monitoring of Turning Hybrid Solid ComponentsMetals, Vol. 10 (2020) 7, 12 Seiten. | Datei |
    DOI: 10.3390/met10070930
  • Denkena, B., Bouabid, A., Krödel, A.: (2020): Single grain grinding: a novel approach to model the interactions at the grain/bond interface during grindingThe International Journal of Advanced Manufacturing Technology, Vol. 107 (2020) 11-12, S. 4811-4822. | Datei |
    DOI: 10.1007/s00170-020-05219-8
  • Denkena, B., Breidenstein, B., Krödel, A., Prasanthan, V.: (2020): Chip formation in machining hybrid components of SAE1020 and SAE5140Production Engineering Research and Development (WGP), published online: 13 November 2020, 11 Seiten. | Datei |
    DOI: 10.1007/s11740-020-00993-6
  • Denkena, B., Breidenstein, B., Lucas, H., Keitel, M., Tillmann, W., Stangier, D.: (2020): Influence of Residual Stresses in heat-treated High-Speed Steels on the Adhesion of CrAlN CoatingsHTM, J. Heat Treatm. Mat., 75 (2020) 3, S. 163-176. | Datei |
    DOI: 10.3139/105.110413
  • Denkena, B., Dittrich, M.-A., Keunecke, L., Wilmsmeier, S.: (2020): Continuous modelling of machine tool failure durations for improved production schedulingProduction Engineering Research and Development (WGP), Volume 14 (2020) Number 2, April 2020, S. 207-215. | Datei |
    DOI: 10.1007/s11740-020-00955-y
  • Denkena, B., Dittrich, M.-A., Krödel, A., Worpenberg, S., Matthies, J., Schaper, F.: (2020): Wear Behaviour of Coated Cemented Carbide Inserts in an Oxygen-Free Atmosphere when Machining Ti-6Al-4VDefect and Diffusion Forum, Vol. 404 (2020), S. 28-35. | Datei |
    DOI: 10.4028/www.scientific.net/DDF.404.28
    ISSN: 1662-9507
  • Denkena, B., Dittrich, M.-A., Noske, H., Witt, M.: (2020): Statistical approaches for semi-supervised anomaly detection in machiningProduction Engineering Research and Development (WGP), Volume 14 (2020) Number 2, April 2020, S. 385-393. | Datei |
    DOI: 10.1007/s11740-020-00958-9
  • Denkena, B., Dittrich, M.-A., Vibora Münch, G., Thiem, S.: (2020): Digitalisierung mit Weiterbildung gestalten - Handlungsfelder für die Weiterbildung zur Digitalisierung nutzenwt Werkstattstechnik online, Jahrgang 110 (2020), Nr. 4, S. 241-244. | Datei |
  • Denkena, B., Dittrich, M.-A., Wilmsmeier, S., Stamm, S.: (2020): Optimization of delivery adherence based on capacity planning and bid pricingProduction Engineering Research and Development (WGP), Volume 14 (2020) Number 3, April 2020, S. 309-318. | Datei |
    DOI: 10.1007/s11740-020-00959-8
  • Denkena, B., Grabowski, R., Krödel, A., Ellersiek, L.: (2020): Process stability of a novel roughing‑finishing end millProduction Engineering Research and Development (WGP), Volume 14 (2020) Number 3, S. 395-405. | Datei |
    DOI: 10.1007/s11740-020-00963-y
  • Denkena, B., Grabowski, R., Krödel, A., Ellersiek, L.: (2020): Time-domain simulation of milling processes including process dampingCIRP Journal of Manufacturing Science and Technology, Vol. 30 (2020), S. 149-156. | Datei |
    DOI: 10.1016/j.cirpj.2020.05.003
  • Denkena, B., Grove, T., Behrens, L., Müller-Cramm, D.: (2020): Wear mechanism model for grinding of PcBN cutting insertsJournal of Materials Processing Technology, Vol. 277 (2020), 11 Seiten. | Datei |
    DOI: 10.1016/j.jmatprotec.2019.116474
  • Denkena, B., Grove, T., Müller-Cramm, D., Krödel, A.: (2020): Influence of the cutting direction angle on the tool wear behavior in face plunge grinding of PcBNWear, Vol. 454-455 (2020), 12 Seiten. | Datei |
    DOI: 10.1016/j.wear.2020.203325
  • Denkena, B., Krödel, A., Harmes, J., Kempf, F., Griemsmann, T., Hoff, C., Hermsdorf, J., Kaierle, S.: (2020): Additive manufacturing of metal-bonded grinding toolsThe International Journal of Advanced Manufacturing Technology, Vol. 107 (2020) 5-6, S. 2387-2395. | Datei |
    DOI: 10.1007/s00170-020-05199-9
  • Denkena, B., Krödel, A., Theuer, M.: (2020): Novel continuous generating grinding process for the production of cutting toolsCIRP Journal of Manufacturing Science and Technology, Vol. 28 (2020), S. 1-7. | Datei |
    DOI: 10.1016/j.cirpj.2020.02.001
  • Denkena, B., Krödel, A., Wilckens, M.: (2020): Einfluss der Schleifscheibenanstellung auf die Oberflächenqualität - Bearbeitungswinkel zur Produktivitätsoptimierung beim Schleifen freigeformter Oberflächenwt Werkstattstechnik online, Jahrgang 110 (2020), Nr. 6, S. 389-392. | Datei |
  • Denkena, B., Krödel, A., Wippermann, A., Wolters, P.: (2020): Grinding of transformation-toughened mixed oxide ceramicThe International Journal of Advanced Manufacturing Technology, Vol. 109 (2020), S. 1463-1478. | Datei |
    DOI: 10.1007/s00170-020-05728-6
  • Denkena, B., Michaelis, A., Herrmann, M., Pötschke, J., Krödel, A., Vornberger, A., Picker, T.: (2020): Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edgesWear, Vol. 456-457 (2020), 8 Seiten.
    DOI: 10.1016/j.wear.2020.203395
  • Denkena, B., Pape, O., Krödel, A., Böß, V., Ellersiek, L., Mücke, A.: (2020): Process design for 5‑axis ball end milling using a real‑time capable dynamic material removal simulationProduction Engineering Research and Development (WGP), Volume 15 (2021) Number 1, February 2021, S. 89-95. | Datei |
    DOI: 10.1007/s11740-020-01003-5
  • Denkena, B.; Bergmann, B.; Witt, M. (2020): Feeling Machine for Process Monitoring of Turning Hybrid Solid ComponentsMetals | Datei |
    DOI: 10.3390/met10070930
  • Dittrich, M.-A., Fohlmeister, S.: (2020): Cooperative multi-agent system for production control using reinforcement learningCIRP Annals - Manufacturing Technology, 69 (2020), S. 389-392. | Datei |
    DOI: 10.1016/j.cirp.2020.04.005
  • Dittrich, M.-A., Uhlich, F.: (2020): Self-optimizing compensation of surface deviations in 5-axis ball-end milling based on an enhanced description of cutting conditionsCIRP Journal of Manufacturing Science and Technology, Vol. 31 (2020), S. 224-232. | Datei |
    DOI: 10.1016/j.cirpj.2020.05.013
  • Dröder, K., Karpuschewski, B., Uhlmann, E., Arrabiyeh, P. A., Berger, D., Busemann, S., Hartig, J., Madanchi, N., Mahlfeld, G., Sommerfeld, C.: (2020): A comparative analysis of ceramic and cemented carbide end millsProduction Engineering Research and Development (WGP), Volume 14 (2020) Number 3, June 2020, S. 355-364. | Datei |
    DOI: 10.1007/s11740-020-00966-9
  • F. Wurm, S. Spierling, H.-J. Endres, L. Barner (2020): Plastics and the Environment - Current Status and Challenges in Germany and AustraliaMacromolecular Rapid Communications 17/2020
    DOI: 10.1002/marc.202000351
  • Figueiredo dos Santos, F., Da Costa Silva, S., Abrão, A. M., Denkena, B., Breidenstein, B., Meyer, K.: (2020): Influence of the Carbon Content on the Surface Integrity of Deep Rolled SteelsJournal of Tribology, published online: November 25, 2020, 10 Seiten. | Datei |
    DOI: 10.1115/1.4049109
  • Figueiredo dos Santos, F., Da Costa Silva, S., Abrão, A. M., Denkena, B., Breidenstein, B., Meyer, K.: (2020): Influência da operação de roleteamento sobre a integridade superficial do aço ABNT 1020Revista Matéria, Vol. 25 (2020) Nr. 2, 13 Seiten. | Datei |
    DOI: 10.1590/S1517-707620200002.1051
  • Finger, C., Stiesch, M., Eisenburger, M., Breidenstein, B., Busemann, S., Greuling, A.: (2020): Effect of sandblasting on the surface roughness and residual stress of 3Y‑TZP (zirconia)SN Applied Sciences, (2020) 2, 8 Seiten. | Datei |
    DOI: 10.1007/s42452-020-03492-6
  • Fricke, L.V., Nguyen, H.N., Breidenstein, B., Denkena, B., Dittrich, M.-A., Maier, H.J., Zaremba, D.: (2020): Generation of tailored subsurface zones in steels containing metastable austenite by adaptive machining and validation by eddy current testingtm - Technisches Messen, online veröffentlicht: 15.10.2020, 9 Seiten. | Datei |
    DOI: 10.1515/teme-2020-0045
  • Fricke, L.V., Nguyen, H.N., Breidenstein, B., Zaremba, D., Maier, H.J.: (2020): Eddy Current Detection of the Martensitic Transformation in AISI304 Induced upon Cryogenic Cuttingsteel research international, 91 (2020) No. 10, 9 Seiten. | Datei |
    DOI: 10.1002/srin.202000299
  • Gottwald, S. N.; Reitz, B.; Albrecht, D.; Overmeyer, L. (2020): Concept of a Bonding Technology for Dies below 150 MicrometersProcedia Manufacturing, Volume 52, Pages 9-13
    DOI: 10.1016/j.promfg.2020.11.003
    ISSN: 2351-9789
  • Heuer, T.; Maier, J.; Seitz, M.; Schmidt, M.; Nyhuis P. (2020): Auslegung der Auftragsabwicklungsstrategie - Modellbasierte Entscheidungsunterstützung zur Sicherung der Wettbewerbsfähigkeit produzierender UnternehmenZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb: Vol. 115, No. 6, S. 399-404.
    DOI: https://doi.org/10.3139/104.112367
  • Hürkamp, A.; Dér, A.; Gellrich, S.; Ossowski, T.; Lorenz, R.; Behrens, B.-A.; Herrmann, C.; Dröder, K.; Thiede, S. (2020): Integrated computational product and production engineering for multi-material lightweight structures• The International Journal of Advanced Manufacturing Technology | Datei |
    DOI: 10.1007/s00170-020-05895-6
  • J. Winkelmann, M. Shamsuyeva, H.-J. Endres (2020): Hybrid fabrics for use in bio-based composites for technical applicationsMaterials Today: Proceedings
    DOI: 10.1016/j.matpr.2019.12.097
  • Klaas D, Ottermann R, Dencker F, Wurz MC (2020): Development, Characterisation and High-Temperature Suitability of Thin-Film Strain Gauges Directly Deposited with a New Sputter Coating SystemMDPI Sensors
    DOI: 10.3390/s20113294
  • Krause, M.; Kik, D.; Spengler, T. S.; Nyhuis, P. (2020): Integrierter Planungsansatz zur regionalen Standortplanung und -entwicklung - Workshopbasierte Validierungwt Werkstattstechnik online 110 (2020) Nr. 4, S. 184-188
  • Lotz, C.; Gerdes, N.; Sperling, R.; Lazar, S.; Linke, S.; Neumann, J.; Stoll, E.; Ertmer, W.; Overmeyer, L. (2020): Tests of additive manufacturing and other processes under space gravity conditions in the Einstein-ElevatorLogistics Journal : Proceedings, Vol. 2020
    DOI: 10.2195/lj_Proc_lotz_en_202012_01
  • Lucht, T.; Hübner, M.; Nyhuis, P. (2020): Effiziente Auftragsabwicklung im Metall-RecyclingZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (9), S. 606-611
    DOI: https://doi.org/10.1515/zwf-2020-1150914
  • M. Shamsuyeva, B. P. Chang, N. Vellguth, M. Misra, A. Mohanty, H.-J. Endres (2020): Surface Modification of Flax Fibers for Manufacture of Engineering Thermoplastic BiocompositesJournal of Composites Science, 4, 64
    DOI: 10.3390/jcs4020064
  • M. Shamsuyeva, H.-J. Endres (2020): Effect of the polyethyleneimine coating on the bending properties of the natural fiber-reinforced biocompositesAcademic Journal of Polymer Science 3, 4
    DOI: 10.19080/AJOP.2020.03.555619
  • Magalhãesa, F.C., Ventura, C.E.H. , Abrão, A.M., Denkena, B.: (2020): Experimental and numerical analysis of hard turning with multi-chamfered cutting edgesJournal of Manufacturing Processes, Vol. 49 (2020), S. 126-134. | Datei |
    DOI: 10.1016/j.jmapro.2019.11.025
  • Maier, H.J., Herbst, S., Denkena, B., Dittrich, M.-A., Schaper, F., Worpenberg, S., Gustus, R., Maus-Friedrichs, W.: (2020): Towards Dry Machining of Titanium-Based Alloys: A New Approach Using an Oxygen-Free EnvironmentMetals, Vol. 10 (2020) 9, 8 Seiten. | Datei |
    DOI: 10.3390/met10091161
  • Malessa, N.; Ast, J.; Kandler, M.; Ströhlein, K.; Nyhuis, P.; Lanza, G.; Nieken, P. (2020): Digitale Führung und Technologien für die Teaminteraktion von morgenZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (7-8), S. 540 - 544
    DOI: 10.3139/104.112374
  • Martins, A. M., Souza, P. S., Júnior dos Santos, A., Abrão, A. M., Denkena, B., Breidenstein, B., Meyer, K.: (2020): Estudo sobre a integridade superficial do aço ABNT 4140 após a operação de torneamentoRevista Matéria, Vol. 25 (2020) Nr. 2, 12 Seiten. | Datei |
    DOI: 10.1590/S1517-707620200002.1027
  • Müller, F.; Malik, I.; Wester, H.; Behrens, B.-A. (2020): Experimental Characterisation of Tool Hardness Evolution Under Consideration of Process Relevant Cyclic Thermal and Mechanical Loading During Industrial ForgingIn Production at the Leading Edge of Technology. Lecture Notes in Production Engineering. Springer: Berlin/Heidelberg, Germany, 2020; pp. 3–12. | Datei |
    DOI: 10.1007/978-3-662-62138-7_1
  • Neumann, E.; Schumacher, S.; Bauer, D.; Lucht, T.; Bauernhansl, T.; Nyhuis, P. (2020): Einführung einer autonomen Produktion: Ein Reifegradmodell mit Handlungsempfehlungen für produzierende Unternehmenwt Werkstattstechnik online 110 (2020) Nr. 4, S. 177-183
    DOI: 10.37544/1436-4980-2020-04-11
  • Oleff, A.; Küster, B.; Stonis M.; Overmeyer, L. (2020): Optische Qualitätsprüfung für die additive MaterialextrusionZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Band 115, Ausgabe 1-2 (Februar)
    DOI: 10.3139/104.112228
  • Overmeyer, L.; Wachsmuth, S.; Hermsdorf, J.; Reimann, W. (2020): Novel method for dynamic strength testing of laser brazed jointsCIRP Annals, Volume 69, Issue 1, 2020, Pages 241-244
    DOI: 10.1016/j.cirp.2020.04.055
  • R. Wascher, F. Bittner, G. Avramidis, M. Bellmann, H.-J. Endres, H. Militz, W. Viöl (2020): Use of computed tomography to determine penetration paths and the distribution of melamine resin in thermally-modified beech veneers after plasma treatmentComposites Part A: Applied Science and Manufacturing
    DOI: 10.1016/j.compositesa.2020.105821
  • Raatz, A.; Blankemeyer, S.; Recker, T.; Pischke, D.; Nyhuis, P. (2020): Task scheduling method for HRC workplaces based on capabilities and execution time assumptions for robotsCIRP Annals - Manufacturing Technology, Elsevier B.V., 2020, Vol. 69/1, pp 13-16.
    DOI: 10.1016/j.cirp.2020.04.030
  • S. Kroll, D. Iliew, A. Siebert-Raths (2020): Thermoplastic biocomposites based on agro waste materials - Wheat straw fibres and their effect on reinforcement, filling and odour formationbio-fibre Magazine, 5-6/2020
  • S. Spierling, V. Venkatachalam, M. Mudersbach, N. Becker, C. Herrmann, H.-J. Endres (2020): End-Of-Life Options for Bio-Based Plastics in a Circular Economy - Status Quo and Potential from a Life Cycle Assessment PerspectiveResources 9(7)
    DOI: 10.3390/resources9070090
  • S. Szyniszewski, R. Vogel, F. Bittner, E. Jakubczyk, M. Anderson, M. Pelacci, A. Chinedu, H.-J. Endres, T. Hipke (2020): Non-cuttable material created through local resonance and strain rate effectsScientific Reports 10, 11539
    DOI: 10.1038/s41598-020-65976-0
  • Scherwitz, P.; Bank, L.; Roth, S.; Theumer, P.; Mundt, C.; Winter, M.; Heuer, T.; Hübner, M.; Seitz, M.; Schmidhuber, M.; Maibaum, J. (2020): Digitale Transformation in der Produktionsplanung und -steuerung - Ergebnisse einer gemeinsamen Studie der produktionstechnischen Institute Fraunhofer IGCV, IFA, IPMT und WZLZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb: Vol. 115, No. 4, S. 252-256.
    DOI: https://doi.org/10.3139/104.112271
  • Schöler, S.; Schmieding, M.; Heimes, N.; Pape, F.; Behrens, B.-A.; Poll, G.; Möhwald, K. (2020): Characterization of Molybdenum Based Coatings on 100Cr6 Bearing Steel SurfacesTribology Online 15, 2020 (3) | Datei |
    DOI: 10.2474/trol.15.181
  • Schönemann, L., Berger, D., Dörgeloh, T., Riemer, O., Brinksmeier, E., Krüger, R., Schreiber, P., Denkena, B., Hochbein, J., Parsa, N., Schenk, C., Kuhfuß, B.: (2020): Synergistic approaches to ultra-precision high performance cuttingCIRP Journal of Manufacturing Science and Technology, Vol. 28 (2020), S. 38-51. | Datei |
    DOI: 10.1016/j.cirpj.2019.12.001
  • Sohrt, S.; Overmeyer, L. (2020): Decentralized Routing Algorithm with Physical Time Windows for Modular ConveyorsLOGISTICS RESEARCH, Vol. 13, Issue 1, Bundesvereinigung Logistik (BVL) e. V., Bremen
    DOI: 10.23773/2020_8
  • Souza, P. S., Cangussu, V. M., Câmara, M. A., Abrão, A. M., Denkena, B., Breidenstein, B., Meyer, K.: (2020): Formation of White Etching Layers by Deep Rolling of AISI 4140 SteelJournal of Materials Engineering and Performance, Vol. 29 (7) 2020, S. 4351-4359. | Datei |
    DOI: 10.1007/s11665-020-04988-3
  • Stobrawa, S., Wöllnitz, S., Dittrich, M.-A.: (2020): Robuste Produktion im volatilen Umfeld - Eine simulationsbasierte Analyse zur Implementierung von Robustheit gegenüber Störungenwt Werkstattstechnik online, Jahrgang 110 (2020) Nr. 4, S. 209-213. | Datei |
  • Thürer, S.E.; Peddinghaus, J.; Heimes, N.; Bayram, F.C.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H.J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound ProfilesMetals, 10, 1162
    DOI: 10.3390/met10091162
  • Vornberger, A., Picker, T., Pötschke, J., Herrmann, M., Denkena, B., Krödel, A., Michaelis, A.: (2020): Influence of Cemented Carbide Composition on Cutting Temperatures and Corresponding Hot HardnessesMaterials, Vol. 13 (2020), 14 Seiten. | Datei |
    DOI: 10.3390/ma13204571
  • Wippermann, A., Gutowski, T.G., Denkena, B., Dittrich, M.-A., Wessarges, Y.: (2020): Electrical energy and material efficiency analysis of machining, additive and hybrid manufacturingJournal of Cleaner Production, 251 (2020), 10 S. | Datei |
    DOI: 10.1016/j.jclepro.2019.119731
  • Wolf, M.; Abt, M.; Hoffmann, G.; Overmeyer, L.; Feldhoff, A. (2020): Ceramic-based thermoelectric generator processed via spray-coating and laser structuringOpen Ceramics, Volume 1, May 2020, 100002
    DOI: 10.1016/j.oceram.2020.100002
  • A. du Plessis, S. G. le Roux, J. Waller, P. Sperling, N. Achilles, A. Beerlink, J.-F. Métayer, M. Sinico, G. Probst, W. Dewulf, F. Bittner, H.-J. Endres, M. Willner, Á. Drégelyi-Kiss, T. Zikmund, J. Laznovsky, J. Kaiser, P. Pinter, S. Dietrich, E. Lopez, O. Fitzek, P. Konrad (2019): Laboratory X-ray tomography for metal additive manufacturing: Round robin testAdditive Manufacturing 30, 100837
    DOI: 10.1016/j.addma.2019.100837
  • Behrens B.-A., Chugreev A., Kock C. (2019): Macroscopic FE-simulation of residual stresses in thermo-mechanically processed steels considering phase transformation effectsXIV International Conference on Computational Plasticity. Fundamentals and Applications, S.211-222
  • Behrens, B.-A., Breidenstein, B., Duran, D., Herbst, S., Lachmayer, R., Löhnert, S., Matthias, T., Mozgova, I., Nürnberger, F., Prasanthan, V., Siqueira R., Töller, F., Wriggers, P.: (2019): Simulation-Aided Process Chain Design for the Manufacturing of Hybrid Shafts - Simulationsgestützte Prozesskettenentwicklung zur Herstellung einer hybriden WelleJournal of Heat Treatment and Materials (HTM), 74 (2019) 2, S. 115-135. | Datei |
    DOI: 10.3139/105.110378
  • Behrens, B.-A.; Breidenstein, B; Duran, D.; Herbst, S.; Lachmayer, R.; Löhnert, S.; Matthias, T.; Mozgova, I.; Nürnberger, F.; Prasanthan, V.; Squeira, R.; Töller, F.; Wriggers, P. (2019): Simulation-Aided Process Chain Design for the Manufacturing of Hybrid ShaftsHTM Journal of Heat Treatment and Materials, Vol. 74, Issue 2, April 2019, S.115-135
    DOI: 10.3139/105.110378
  • Behrens, B.-A.; Chugreev, A. ; Kock, C.; Brunotte, K.; Matthias, T.; Wester, H. (2019): FE-simulation of rotary friction welding process considering thermomechanical-metallurgical couplingProceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, S. 27-30. | Datei |
  • Behrens, B.-A.; Chugreev, A.; Kazhai, M.; Yarcu, D.; Büdenbender, C.; Relge, R. (2019): Fabrication of piston pins made of a novel aluminium-alloyed UHC steelThe International Journal of Advanced Manufacturing Technology, Springer Verlag
    DOI: 10.1007/s00170-019-03473-z
  • Behrens, B.-A.; Dilger, K.; Lippky, K.; Kaempf, L.; Hübner, S.; Hartwig, S.; Altun, Y.; Garbriel, M.; Farahmand, E.; Micke-Camuz, M. (2019): Combined deep drawing and fusion bonding of structural FRP-metal hybrid partsProcedia Manufacturing, Vol. 29
    DOI: 10.1016/j.promfg.2019.02.141
  • Behrens, B.-A.; Hübner S.; Wölki K. (2019): Acoustic emissions during tensile test of DC06 and HCT600XMaterialwissenschaft und Werkstofftechnik, Vol. 50, S.796-809
    DOI: 10.1002/mawe.201800092
  • Behrens, B.-A.; Hübner, S.; Yarcu, S.; Wölki, K.; Maier, H. J.; Golovko, O.; Nürnberger, F. (2019): Erzeugung duktiler Bereiche beim Formhärtenwt-online, Ausgabe 10-2019 , S.750-754 Weitere Informationen
  • Behrens, B.-A.; Lorenz, R. (2019): Erweiterung der Modellierung der Wärmefreisetzungsrate für StähleEFB-Forschungsbericht Nr. 521, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., Hannover, 2019
    ISBN: 978-3-86776-575-6
  • Behrens, B.-A.; Relge, R. (2019): Verbesserung der Duktilität durch Kornfeinung - Entwicklung eines isothermen ECAP-Werkzeugs zur Umformung von Eisen-Aluminium-Legierungenwt-online, Ausgabe 10-2019 , S.770-776 Weitere Informationen
  • Behrens, B.-A.; Schröder, J.; Brands, D.; Scheunemann, L.; Niekamp, R.; Chugreev, A.; Sarhil, M.; Uebing, S.; Kock, C. (2019): Experimental and numerical investigations on the development of residual stresses in thermo-mechanically processed Cr-alloyed steel 1.3505Metals 2019, Vol. 9, Issue 4, S.480
    DOI: 10.3390/met9040480
  • Bernd-Arno Behrens; Alexander Chugreev; Tim Matthias; Gerhard Poll; Florian Pape; Timm Coors; Thomas Hassel; Hans Jürgen Maier; Maximilian Mildebrath (2019): Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored FormingMetals 2019, Volume 9, Issue 2, 232
  • Brands, D.; Chugreev, A.; Kock, C.; Niekamp, R.; Scheunemann, L.; Uebing, S.; Behrens, B.-A.; Schröder, J. (2019): Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific coolingProceedings in Applied Mathematics & Mechanics, 12. November 2019
    DOI: 10.1002/pamm.201900017
  • Breidenstein, B., Grove, T., Krödel, A., Sitab, R.: (2019): Influence of hexagonal Phase transformation in laser prepared PcBN cutting tools on tool wear in machining of Inconel 718Metal Powder Report, published online: 11 January 19, 7 Seiten. | Datei |
    DOI: 10.1016/j.mprp.2018.12.077
  • Bruns, C.; Bohne, F.; Micke-Camuz, M.; Behrens, B.-A.; Raatz, A. (2019): Heated gripper concept to optimize heat transfer of fiber-reinforced-thermoplastics in automated thermoforming processesProcedia CIRP, Vol. 79, S.331-336
    DOI: 10.1016/j.procir.2019.02.077
  • Budelmann, D., Detampel, H., Schmidt, C., Meiners, D.: (2019): Interaction of process parameters and material properties with regard to prepreg tack in automated lay-up and draping processesComposites Part A, Vol. 117 (2019), S. 308-316. | Datei |
  • C. Backhaus, F. Dötzer, F.; Hoffmann, G.; Lorenz, L.; Overmeyer, L.; Bock, K.; Lindlein, N. (2019): New concept of a polymer optical ray splitter simulated by Raytracing with a new Bisection-AlgorithmFrontiers in Optics + Laser Science APS/DLS, The Optical Society (Optical Society of America)
    DOI: 10.1364/FIO.2019.JW4A.56
  • Cevirgen, C.; Herberger, D.; Schenk, S.; Nyhuis, P. (2019): Internet Platform for the Implementation of Industry 4.0 in SMEsProceedings of COMA '19 - International Conference on Competitive Manufacturing, CIRP Sponsored
    ISBN: 978-0-7972-1779-9
  • Christ M, Kassner A, Smol R, Bawamia A, Heine H, Herr W, Peters A, Wurz MC, Rasel EM, Wicht A, Krutzik M (2019): Integrated atomic quantum technologies in demanding environments: development and qualification of miniaturized optical setups and integration technologies for UHV and space operationCEAS Space Journal
    DOI: 10.1007/s12567-019-00252-0
  • Denkena, B., Bergmann, B., Böhse, F.: (2019): Mit aktiver Ruckentkopplung zu reduzierten MaschinenschwingungenKonstruktion, (2019) Nr. 11-12, S. 76 - 82. | Datei |
  • Denkena, B., Bergmann, B., Grove, T., Picker, T.: (2019): Chip Formation of Rounded Cutting EdgesInternational Journal of Precision Engineering and Manufacturing, published online: 07 February 2019, 8 Seiten. | Datei |
    DOI: 10.1007/s12541-019-00020-4
  • Denkena, B., Bergmann, B., Kiesner, J.: (2019): Increasing the measuring accuracy of a sensory swing clamp by multi-sensor evaluationJournal of Manufacturing Science and Engineering, Vol. 141 (2019), S. 111007-1 - 111007-8. | Datei |
    DOI: 10.1115/1.4044714
  • Denkena, B., Bergmann, B., Lepper, T., Rahner, B.-H., Schneider, S., Nonnast, G., Weissensee, K., Preller, F., Hannesen, F., Braungardt, G.: (2019): Ein Roboter für die effiziente Zerspanungwt Werkstattstechnik online, Jahrgang 109 (2019), Heft 3, S. 194 - 198. | Datei |
  • Denkena, B., Bergmann, B., Neff, T., Witt, M.: (2019): Einzelteilüberwachung in Beschleunigungsphasenwt Werkstattstechnik online, Jahrgang 109 (2019), Heft 5, S. 347 - 351. | Datei |
  • Denkena, B., Breidenstein, B., Grove, T., Prasanthan, V., Overmeyer, L., Nothdurft, S., Kaierle, S., Wallaschek, J., Twiefel, J., Ohrdes, H., Maier, H.J., Hassel, T., Mildebrath, M.: (2019): Surface integrity of turned laser-welded hybrid shaftsProduction Engineering Research and Development, published online: 04th December 2018, 9 Seiten. | Datei |
    DOI: 10.1007/s11740-018-0862-8
  • Denkena, B., Dittrich, M.-A., Böß, V., Wichmann, M., Friebe, S.: (2019): Self‑optimizing process planning for helical flute grindingProduction Engineering Research and Development (WGP), published online: 7 June 2019, 8 Seiten. | Datei |
    DOI: 10.1007/s11740-019-00908-0
  • Denkena, B., Dittrich, M.-A., Huuk, J.: (2019): Berücksichtigung von Oberflächeneigenschaften in der CAD/CAM-Kette - Automatische Auswahl von Prozessstellgrößen durch integrierte ProzessmodelleZWF, 114 (2019) 11, S. 702-706. | Datei |
  • Denkena, B., Dittrich, M.-A., Jacob, S.: (2019): Methodology for integrative production planning in highly dynamic environmentsProduction Engineering Research and Development (WGP), published online: 23 February 2019, 8 Seiten. | Datei |
    DOI: 10.1007/s11740-019-00889-0
  • Denkena, B., Grove, T., Dzierzawa, P., Kempf, F.L.: (2019): Kontinuierliches Wälzschleifen - Thermische und mechanische Belastung beim kontinuierlichen Wälzschleifen mit cBN-Schleifwerkzeugenwt Werkstattstechnik online, Jahrgang 109 (2019), Heft 6, S. 471 - 476. | Datei |
  • Denkena, B., Grove, T., Gartzke, T.: (2019): Wear mechanisms of CVD diamond tools for patterning vitrified corundum grinding wheelsWear, published online: 13 August 2019, 8 Seiten. | Datei |
    DOI: 10.1016/j.wear.2019.203007
  • Denkena, B., Grove, T., Kempf, F., Dzierzawa, P., Bouabid, A., Liu, Y.: (2019): Model-based manufacturing and application of metal-bonded grinding wheelsCIRP Annals-Manufacturing Technology, 68 (2019), S. 321-324. | Datei |
  • Denkena, B., Grove, T., Liu, Y.: (2019): Computerunterstützte Schleifwerkzeugherstellung - Simulation der Prozesskette zur Herstellung metallisch gebundener Schleifwerkzeugewt Werkstattstechnik online, Jahrgang 109 (2019), Heft 6, S. 462 - 465. | Datei |
  • Denkena, B., Grove, T., Suntharakumaran, V.: (2019): New profiling approach with geometrically defined cutting edges for sintered metal bonded CBN grinding layersJournal of Materials Processing Technology, published online: 25 October 2019, 11 Seiten. | Datei |
  • Denkena, B., Krödel, A., Grove, T.: (2019): On the pulsed laser ablation of polycrystalline cubic boron nitride — Influence of pulse duration and material properties on Ablation characteristicsJournal of Laser Applications, 31, 022004 (2019), 12 Seiten. | Datei |
    DOI: 10.2351/1.5084724
  • Denkena, B., Ortmaier, T., Bergmann, B., Schreiber, P., Ahrens, M., Damm, J.: (2019): Suitability of integrated sensors for the determination of chatter characteristics in a cylindrical grinding machineThe International Journal of Advanced Manufacturing Technology, published online: 01 February 2019, 6 Seiten. | Datei |
    DOI: 10.1007/s00170-019-03323-y
  • Dinulovic D, Shousha M, Haug M, Gerfer A, Beringer S, Wurz MC, Thone J, Wens M (2019): Microfabricated Magnetics on Silicon for Point of Load High Frequency Dc-Dc Converter ApplicationsIEEE Transactions on Industry Applications
    DOI: 10.1109/TIA.2019.2921523
  • Dittmar, H.; Jaeschke, P.; Suttmann, O.; Kaierle, S.; Overmeyer, L. (2019): Automatic control for laser-based repair preparation of composites by fiber orientation detection and short coherent interferometryJournal of Laser Applications 31, 022204 (2019). Weitere Informationen
    DOI: 10.2351/1.5096119
  • Dittrich, M.-A., Böß, V., Wichmann, M., Denkena, B.: (2019): Simulation-based compensation of deflection errors in helical flute grindingCIRP Journal of Manufacturing Science and Technology, published online: 27 November 2019, 7 Seiten. | Datei |
    DOI: 10.1016/j.cirpj.2019.11.002
  • Dittrich, M.-A., Denkena, B., Boujnah, H., Uhlich, F.: (2019): AUTONOMOUS MACHINING – RECENT ADVANCES IN PROCESS PLANNING AND CONTROLJournal of Machine Engineering, Vol. 19, No. 1 (2019), S. 28-37. | Datei |
  • Graf, M.; Ullmann, M.; Korpala, G.; Wester, H.; Awiszus, B.; Kawalla, R.; Behrens, B.-A (2019): Forming and Oxidation Behavior During Forging with Consideration of Carbon Content of SteelMetals 2018, Vol. 8, S.996
    DOI: 10.3390/met8120996
  • Herberger, D.; Nyhuis, P. (2019): Development of a Method for Communication-Oriented Supplier EvaluationProceedings of COMA '19 - International Conference on Competitive Manufacturing, CIRP Sponsored
    ISBN: 978-0-7972-1779-9
  • Hiller, T.; Härtel, L.; Nyhuis, P. (2019): Gestaltung effizienter Produktionssysteme - Zukünftigen Entwicklungen und Herausforderungen in der Fertigung optischer Systeme begegnenZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Vol. 114, No. 12, S. 802-806.
    DOI: https://doi.org/10.3139/104.112223
  • Hockauf, R., Böß, V., Grove, T., Denkena, B.: (2019): Prediction of Ground Surfaces by Using the Actual Tool TopographyJournal of Manufacturing and Materials Processing, Vol. 3 (2019) 2, S. 1-9. | Datei |
    DOI: 10.3390/jmmp3020040
  • Hohnholz, A.; Can, C.; Kaierle, S.; Overmeyer, L. (2019): Model-based Curing Depth Control of Aerosol Jet StereolithographyJournal of Photopolymer Science and Technology, Vol. 32, Iss. 2, p. 217-221
    DOI: 10.2494/photopolymer.32.217
    ISSN: 1349-6336
  • Hohnholz, A.; Obata, K.; Nakajima, Y.; Koch, J.; Terakawa, M.; Suttmann, O.; Overmeyer, L.; (2019): Hybrid UV laser direct writing of UV-curable PDMS thin film using aerosol jet printingApplied Physics A (2019) 125: 120.
    DOI: 10.1007/s00339-018-1902-0
  • Hürkamp, A.; Lorenz, R.; Behrens, B.-A.; Dröder, K. (2019): Computational Manufacturing for Multi-Material Lightweight PartsCIRP 00 (2017) 000–000, Seiten 102-107
    DOI: 10.1016/j.procir.2019.09.041
  • Jagodzinski, A.; Kruse, J.; Barroi, A.; Mildebrath, M.; Langner, J.; Stonis, M.; Lammers, M.; Hermsdorf, J.; Hassel, T.; Behrens, B.-A.; Overmeyer, L. (2019): Investigation of the Prediction Accuracy of a Finite Element Analysis Model for the Coating Thickness in Cross-Wedge Rolled Coaxial Hybrid PartsMaterials 2019, 12(18), 2969
    DOI: 10.3390/ma12182969
  • Kaierle, S.; Overmeyer, L.; Hoff, C.; Meier, O.; Hermsdorf, J. (2019): Development of a laser ablation process model and a disposable 3D-printed tool head for weakening thick steel sheets for the deflagration of hazardous substancesCIRP Journal of Manufacturing Science and Technology
    DOI: 10.1016/j.cirpj.2019.04.006
  • Kleinert, S.; Bindszus, L.; Overmeyer, L.; Wittek, H.; Klie, B.; Giese, U. (2019): Approach for additive Manufacturing of high-viscosity, curable Rubbers by AME Processing (Additive Manufacturing of Elastomers) – Rubber 3DKGK – Kautschuk Gummi Kunststoffe, Vol. 6, Nr. 72, S. 53-56
  • Kunieda, M.; Overmeyer, L.; Klink, A. (2019): Visualization of electro-physical and chemical machining processesCIRP Annals, Volume 68, Issue 2, Pages 751-774
    DOI: 10.1016/j.cirp.2019.05.011
  • Lahdo, R.; Seffer, O.; Kaierle, S.; Overmeyer, L. (2019): Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum jointsJournal of Laser Applications 31, 022418
    DOI: 10.2351/1.5096105
  • Leal, C.A.A., Abrão, A.M., Brandão, L.C., Ventura, C.E.H., Denkena, B., Breidenstein, B.: (2019): Chamfer texturing of tungsten carbide inserts applied to turning of grey cast ironThe International Journal of Advanced Manufacturing Technology, published online: 30 August 2019, 10 Seiten. | Datei |
    DOI: 10.1007/s00170-019-04358-x
  • M. Shamsuyeva, J. Winkelmann, H.-J. Endres (2019): Manufacture of hybrid natural / synthetic fiber woven textiles for use in technical biocomposites with maximum biobased contentJournal of Composites Science, 3, 17
    DOI: 10.3390/jcs3020043
  • M. Shamsuyeva, O. Hansen, H.-J. Endres (2019): Review on hybrid carbon-/flax composites and their propertiesInternational Journal of Polymer Science
    DOI: 10.1155/2019/9624670
  • M. Shamsuyeva, O. Hansen, H.-J. Endres (2019): Review on Hybrid Carbon/Flax Composites and Their PropertiesInternational Journal of Polymer Science
    DOI: 10.1155/2019/9624670
  • Magalhães, F.C., Ventura, C.E.H., Abrão, A.M., Denkena, B., Breidenstein, B., Meyer, K.: (2019): Prediction of surface residual stress and hardness induced by ball burnishing through neural networksInternational Journal of Manufacturing Research, Vol. 14 (2019) 3, S.295-310. | Datei |
  • Maier, D.; Hartmann, C.; Till, M.; Büdenbender, C.; Behrens, B.-A.; Volk, W. (2019): Data-Driven Compensation for Bulk Formed Parts Based on Material Point TrackingKey Engineering Materials, Volume 794, 25. Februar 2019, S.277-284
    DOI: 10.4028/www.scientific.net/KEM.794.277
  • Mori, K., Bergmann, B., Kono, D., Denkena, B., Matsubara, A.: (2019): Energy efficiency improvement of machine tool spindle cooling system with on–off controlCIRP Journal of Manufacturing Science and Technology, Vol. 25 (2019), S. 14-21. | Datei |
    DOI: 10.1016/j.cirpj.2019.04.003
  • Nielsen, L.; Klausing, P.; Nyhuis, P. (2019): Zielsystem für Multiprojektmanagement in Fabrikenwt-online 4-2019, S. 273-277 Weitere Informationen
  • Nothdurft, S., Prasanthan, V., Denkena, B., Breidenstein, B., Grove, T., Ohrdes, H., Twiefel, J., Wallaschek, J., Hassel, T., Hermsdorf, J., Overmeyer, L., Kaierle, S.: (2019): Surface Integrity of Laser Beam Welded Steel–Aluminium Alloy Hybrid Shafts after Turningmetals, Vol. 9 (2019) 134, published online: 26 January 2019, 13 Seiten. | Datei |
    DOI: 10.3390/met9020134
  • Nothdurft, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle S. (2019): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser beam welded aluminum alloyJournal of Laser Applications ICALEO2018, 022402
    DOI: 10.2351/1.5096100
  • Nothdurft, S.; Prasanthan, V.; Denkena, B.; Breidenstein, B.; Grove, T.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Kaierle, S.; (2019): Surface Integrity of Laser Beam Welded Steel–Aluminium Alloy Hybrid Shafts after TurningMetals 2019, 9(2).
    DOI: 10.3390/met9020134
  • Overmeyer, L.; Hohnholz, A.; Suttmann, O.; Kaierle, S. (2019): Multi-material laser direct writing of aerosol jet layered polymersCIRP Annals, Vol. 68, Iss. 1, p. 217-220
    DOI: 10.1016/j.cirp.2019.04.115
    ISSN: 0007-8506
  • Reitberger, T.; Zeitler, J.; Backhaus, C.; Hoffmann, G.-A.; Wienke, A.; Lorenz, L.; Bock, K.; Wolter, K.-J.; Suttmann, O.; Overmeyer, L.; Lindlein, N.; Franke J. (2019): Modeling, Simulation and Manufacturing of Polymer Optical Waveguides by Using the OPTAVER ProcessApplied Industrial Optics 2019, OSA Technical Digest (Optical Society of America), paper T2A.1
    DOI: 10.1364/AIO.2019.T2A.1
  • Schirrmacher, S.; Ullmann, G.; Overmeyer, L. (2019): Multimaterial bathless stereolithography using aerosol jet printing and UV laser based polymerizationJournal of Laser Applications 31, 022301 (2019). Weitere Informationen
    DOI: 10.1515/ehs-2014-0044
  • Schlangen, S.; Bremer, K.; Böhm, S.; Wellmann, F.; Steinke, M.; Neumann, J.; Roth, B.; Overmeyer, L. (2019): Grating assisted glass fiber coupler for mode selective co-directional couplingOpt. Lett. 44, 2342-2345
    DOI: 10.1364/OL.44.002342
  • Schmidt, C., Hocke, T., Denkena, B.: (2019): Artificial intelligence for non‑destructive testing of CFRP prepreg materialsProduction Engineering Research and Development, published online: 06 July 2019, 10 Seiten. | Datei |
  • Schmidt, C., Hocke, T., Denkena, B.: (2019): Deep learning-based classification of production defects in automated-fiber-placement processesProduction Engineering Research and Development (WGP), published online: 21 March 2019, 9 Seiten. | Datei |
    DOI: 10.1007/s11740-019-00893-4
  • Schmidt, M.; Maier, J. T.; Härtel, L. (2019): Data based root cause analysis for improving logistic key performance indicators of a company’s internal supply chainIn: Procedia CIRP, Volume 86, 2019, pp. 276-281
    DOI: https://doi.org/10.1016/j.procir.2020.01.023
  • Schöler, S.; Kock, C.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2019): Numerical simulation of the abrasive wear behavior of selectively oxidized α-Fe2O3 oxide layers on tool steel surfacesThe Journal of The Minerals (JOM), 2019
  • Schöler, S.; Schmieding, M.; Yilkiran, D.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2019): Wear behavior of selectively oxidized α-Fe2O3 oxide low-friction layer systems on PM tool steel surfacesWear Vol. 426-427, 30. April 2019, S.1603 – 1615
    DOI: 10.1016/j.wear.2019.01.009
  • Schulz, L.; Overmeyer, L. (2019): Ein induktives Heizverfahren für die Herstellung von Kunststoff-Metall-Verbunden am Beispiel von Verbindungen für Stahlseilfördergurte (Teil 1)KGK – Kautschuk Gummi Kunststoffe, Vol. 9, Nr. 72, S. 24-32
    ISSN: 0948-3276
  • Schulz, L.; Overmeyer, L. (2019): Ein induktives Heizverfahren für die Herstellung von Kunststoff-Metall-Verbunden am Beispiel von Verbindungen für Stahlseilfördergurte (Teil 2)KGK – Kautschuk Gummi Kunststoffe, Vol. 10, Nr. 72, S. 56-62
    ISSN: 0948-3276
  • Schulz, L.; Overmeyer, L. (2019): An Inductive Heating Method for Manufacturing of Plastic Metal Composites in Application for Splices of Steel Cord Conveyor Belts – Part 1KGK – Rubberpoint
  • Schulz, L.; Overmeyer, L. (2019): An Inductive Heating Method for Manufacturing of Plastic Metal Composites in Application for Splices of Steel Cord Conveyor Belts – Part 2KGK – Rubberpoint
  • Seitz, M.; Mayer, J.; Mütze, A.; Nyhuis, P. (2019): Produktivität versus Termintreue. Logistikorientierte Auftragsreihenfolgebildung für mehrstufige Produktionsprozessewt-online 4-2019, Seite 204-208. Weitere Informationen
  • Seitz, M.; Mütze, A.; Nyhuis, P. (2019): Produktionssteuerung von komplexen Materialflüssen. Berücksichtigung von Wechselwirkungseffekten zur Erreichung einer hohen logistischen LeistungsfähigkeitZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 2019, Band 114, Ausgabe 12, S.828-834
    DOI: 10.3139/104.112211
    ISSN: 0947-0085
  • Simon Schöler, Maurice Schmieding, Deniz Yilkiran, Fahrettin Özkaya, Christopher Nowak, Kai Möhwald, Bernd-Arno Behrens, Hans Jürgen Maier (2019): Wear behavior of selectively oxidized α-Fe2O3 oxide low-friction layer systems on PM tool steel surfaces Wear Vol. 426-427 (2017) 1603 – 1615. Elsevier | Datei |
    DOI: 10.1016/j.wear.2019.01.009
  • Siqueira, R.; Bibani, M.; Duran, D.; Mozgova, I.; Lachmayer, R.; Behrens, B.-A. (2019): An adapted case-based reasoning system for design and manufacturing of tailored forming multi-material componentsInternational Journal on Interactive Design and Manufacturing (IJIDeM), Vol 13, Issue 3, September 2019, S.1175-1184
    DOI: 10.1007/s12008-019-00566-7
  • Staehr, R.; Bastick, S.; Bluemel, S.; Jaeschke, P.; Suttmann, O.; Negel, J.-P.; Angrick, V.; Stolzenburg, C.; Kaierle, S.; Overmeyer, L. (2019): High precision laser macrodrilling of carbon fiber reinforced plastics with a new nanosecond pulsed laser—Optimized toward industrial needs Journal of Laser Applications 31, 022207 (2019). Weitere Informationen
    DOI: 10.2351/1.5096120
  • Wegner, N.; Kotzem D.; Wessarges, Y.; Emminghaus, N.; Hoff, C.; Tenkamp, J.; Hermsdorf, J.; Overmeyer, L.; Walther, F.; (2019): Corrosion and Corrosion Fatigue Properties of Additively Manufactured Magnesium Alloy WE43 in Comparison to Titanium Alloy Ti-6Al-4V in Physiological EnvironmentMaterials 2019, 12(18), 2892
    DOI: 10.3390/ma12182892
  • Wellmann, F.; Steinke, M.; Meylahn, F.; Bode, N.; Willke, B.; Overmeyer, L.; Neumann, J.; Kracht, D. (2019): High power, single-frequency, monolithic fiberamplifier for the next generation of gravitationalwave detectorsOpt. Express 27, 28523-28533
    DOI: 10.1364/OE.27.028523
  • Wippo, V.; Jaeschke, P.; Suttmann, O.; Kaierle, S.; Overmeyer, L. (2019): Laser heat conduction welding of CFRP with modified matrix materialProc. SPIE 10911, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII, 109110T
    DOI: 10.1117/12.2507238
  • Wippo, V.; Jaeschke, P.; Suttmann, O.; Kaierle, S.; Overmeyer, L.; (2019): Evaluation of material based influences at laser based heat conduction welding of carbon fiber reinforced plasticsJournal of Laser Applications 31, 022405 (2019). Weitere Informationen
    DOI: 10.2351/1.5096121
  • Zheng, L.; Evlyukhin, A.; Overmeyer, L.; Reinhardt, C. (2019): Omnidirectional Surface Plasmon Polaritons Concentration in 3D Metallic StructuresPlasmonics
    DOI: 10.1007/s11468-019-00942-9
  • Zheng, L.; Kurselis, K.; El-Tamer, A.; Hinze, U.; Reinhardt, C.; Overmeyer, L.; Chichkov, B. (2019): Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon PolymerizationNanoscale Res Lett 14, 134
    DOI: 10.1186/s11671-019-2955-5
  • Zheng, L.; Kurselis, K.; El-Tamer, A.; Hinze, U.; Reinhardt, C.; Overmeyer, L.; Chichkov, B. (2019): Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon PolymerizationNanoscale Research Letters 14:134 (2019). Weitere Informationen
    DOI: 10.1186/s11671-019-2955-5
  • Zheng, L.; Zywietz, U.; Evlyukhin, A.; Roth, B.;Overmeyer, L.; Reinhardt C. (2019): Experimental Demonstration of Surface Plasmon Polaritons Reflection and Transmission EffectsSensors 2019, 19(21), 4633
    DOI: 10.3390/s19214633
  • Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Hybride Lagerbuchsen aus Aluminium und Stahlwt Werkstatttechnik online Jahrgang 108 (2018) H. 10 | Datei |
  • B. Plinke, F. Bittner, H.-J. Endres (2018): Messung der Dichteverteilung in Holzpartikelwerkstoffen in drei Dimensionen mit ComputertomographieWagenführ (Ed.) Tagungsband des 18. Holztechnologischen Kolloquiums, Dresden, 12.-13. April, 208-217
    ISBN: 978-3-86780-558-2
  • B.-A. Behrens, C. Klose, A. Chugreev, N. Heimes, S. E. Thürer, J. Uhe (2018): A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld SeamsMetals (8) 717 | Datei |
    DOI: 10.3390/met8090717
  • Behrens, B. A.; Chugreev, A.; Hootak, M. (2018): A sectionwise defined model for the material description of 100Cr6 in the thixotropic state AIP Conference Proceedings 1960 | Datei |
    DOI: 10.1063/1.5034860
  • Behrens, B.-A.; Chugreev, A.; Awiszus, B.; Graf, M.; Kawalla, R.; Ullmann, M.; Korpala, G.; Wester, H. (2018): Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot ForgingMetals 2018 Vol. 8(2) | Datei |
  • Behrens, B.-A.; Bohr, D. (2018): Manufacturing of functionally graded metal matrix composite materials by segregationInternational Journal of Materials Research (formerly Zeitschrift für Metallkunde) 109(5), pp 373–380.
    DOI: 10.3139/146.111619
  • Behrens, B.-A.; Brunotte, K.; Bohr, D. (2018): Experimental Investigation of Endogenous Lubrication during Cold Upsetting of Sintered Powder Metallurgical ComponentsKey Engineering Materials, Vol. 767, pp 163-170.
    DOI: 10.4028/www.scientific.net/KEM.767.163
  • Behrens, B.-A.; Chugreev, A.; Kock, C. (2018): Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in thermomechanical forming processesIOP Conference Series: Materials Science and Engineering. 461:012040 | Datei |
    DOI: 10.1088/1757-899X/461/1/012040
  • Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Characterisation of the joining zone of serially arranged hybrid semi-finished components AIP Conference Proceedings 1960, 040002 (2018); doi: 10.1063/1.5034856 | Datei |
  • Behrens, B.-A.; Diaz-Infante, D.; Altan, T.; Yilkiran, D.; Wölki, K.; Hübner, S. (2018): Improving Hole Expansion Ratio by Parameter Adjustment in Abrasive Water Jet Operations for DP800SAE International Journal of Materials and Manufacturing, 11(3) | Datei |
  • Behrens, B.-A.; Hübner, S.; Neumann, A.; Vogt, H.; Meschut, G.; Meyer, S. (2018): Funktionsintegration in der Warmblechumformungwt Werkstattstechnik online Jahrgang 108 (2018), Ausgabe 10, S. 674-678
  • Behrens, B.-A.; Kuwert, P. (2018): Pulvermetallurgie und Verbundschmieden – Erprobung der Verfahrenskombination zur Herstellung festigkeitskonsistenter hybrider Bauteilewt Werkstatttechnik online Jahrgang 108 (2018) H. 10
  • Behrens, B.-A.; Lippold, L. (2018): Influence of shot peened surfaces on friction in hot forgingSurface Topography: Metrology and Properties, Vol. 6, No. 4
    DOI: 10.1088/2051-672X/aae91c
  • Bergmann, B., Grove, T.: (2018): Basic principles for the design of cutting edge roundingsCIRP Annals-Manufacturing Technology, 67 (2018), S. 73-78. | Datei |
  • Blumenthal, P.; Raatz, A. (2018): Design methodology for electrocaloric cooling systemsEnergy Technology, 2018, 6, pp. 1560-1566
    DOI: 10.1002/ente.201800139
    ISBN: ISSN 2194-4296
  • Boyraz, P.; Runge, G.; Raatz, A. (2018): An Overview of Novel Actuators for Soft RoboticsActuators 2018, 7(3), 48 (21 pages)
    DOI: 10.3390/act7030048
  • Brands, D.; Chugreev, A.; Kock, C.; Niekamp, R.; Scheunemann, L.; Uebing, S.; Behrens, B.-A.; Schröder, J. (2018): On the analysis of microstructural residual stresses in hot bulk forming parts under specific coolingProceedings in Applied Mathematics and Mechanics, 18:e201800256
    DOI: 10.1002/pamm.201800256
  • Bruns C., Micke-Camuz M., Bohne F. , Raatz A. (2018): Process design and modelling methods for automated handling and draping strategies for composite componentsCIRP Annals - Manufacturing Technology, Elsevier B.V., 2018, Vol. 67/1, pp 1-4
    DOI: https://doi.org/10.1016/j.cirp.2018.04.014
    ISBN: ISSN 0007-8506
  • Bruns, C.; Micke-Camuz, M.; Bohne, F.; Raatz, A. (2018): Process design and modelling methods for automated handling and draping strategies for composite componentsCIRP Annals, Volume 67, Issue 1, 2018, Pages 1-4 | Datei |
  • Bussemer, F.; Schmitz, J.; Nyhuis, P. (2018): Projektkonfiguration in der Fabrikplanung - Methode zur Restrukturierung von Fertigungs- und Montagebereichenwt Werkstatttechnik online 108 (2018) H. 4 Weitere Informationen
  • Bussemer, Felix; Herbger, David; Nyhuis, Peter (2018): Configuration Elements for Restructuring Manufacturing and Assembly AreasThe Institute for Business and Finance Research, LLC (Hg.): Review of Business & Finance Studies. Unter Mitarbeit von Terrance Jalber und Mercedes Jalbert. 9. Aufl. (1), S. 95–101.
  • Chugreeva, A.; Mildebrath, M.; Diefenbach, J.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Hassel, T.; Overmeyer, L.; Behrens, B.-A. (2018): Manufacturing of High-Performance Bi-Metal Bevel Gears by Combined Deposition Welding and ForgingMetals, 8, 2018 (11), 898 | Datei |
    DOI: 10.3390/met8110898
  • Chugreeva, A.; Mildebrath, M; Diefenbach, J; Barroi, A; Lammers, M.; Hermsdorf, J; Hassel, T; Overmeyer, L.; Behrens, B.-A. (2018): Manufacturing of High-Performance Bi-Metal Bevel Gears by Combined Deposition Welding and ForgingMetals vol. 8 issue 11, p. 898.
    DOI: 10.3390/met8110898
  • Commichau, O.; Krimm, R.; Behrens, B.-A. (2018): Elektromagnetischer Vorschub für Rundstangen und Profile unter Einsatz magnetfeldformender ElementeIGF-Vorhaben 18863 N/1. Forschungsvereinigung: Verein Deutscher Werkzeugmaschinen-fabriken e.V. (VDW), AIF, Frankfurt 2018 | Datei |
  • Dean, A.; Rolfes, R.; Behrens, B.-A., Hübner, S.; Chugreev, A.; Grbic, N. (2018): Parametric Study of Hybrid Metal-Composites Clinching JointsKey Engineering Materials, ISSN: 1662-9795, Vol. 767, pp 413-420
    DOI: 10.4028/www.scientific.net/KEM.767.413
    ISBN: 1662-9795, Vol. 767, pp 413-420
  • Denkena, B., Bergmann, B., Breidenstein, B., Prasanthan, V., Witt, M.: (2018): Analysis of potentials to improve the machining of hybrid workpiecesProduction Engineering Research and Development, published online: 19th December 2018, 9 Seiten. | Datei |
    DOI: 10.1007/s11740-018-00870-3
  • Denkena, B., Bergmann, B., Reiners, J., Königsberg, J., Ponick, B.: (2018): Highly Dynamic Spindle Integrated Magnet Actuators for Chatter ReductionInt. J. of Automation Technology, Vol. 12 (2018) No. 5, S. 669-677. | Datei |
  • Denkena, B., Bergmann, B., Teige, C.: (2018): Frictionally damped tool holder for long projection cutting toolsProduction Engineering Research and Development (WGP), Volume 12 (2018) Number 6, S. 715 - 722. | Datei |
  • Denkena, B., Bergmann, B., Witt, M.: (2018): Impact of hybrid workpieces on statistical process monitoring of machining operationsThe International Journal of Advanced Manufacturing Technology, Published online 10 August 2018, 7 Seiten. | Datei |
  • Denkena, B., Bergmann, B., Witt, M.: (2018): Material identification based on machine learning algorithms for hybrid workpieces during cylindrical operationsJournal of Intelligent Manufacturing, published online: 22 February 2018, 8 Seiten. | Datei |
  • Denkena, B., Bergmann, B., Witt, M.: (2018): Investigations on a predictive process parameter adaptation for machining of hybrid workpiecesCIRP Journal of Manufacturing Science and Technology, published online: 31. Oktober 2018, 5 Seiten. | Datei |
    DOI: 10.1016/j.cirpj.2018.10.004
  • Denkena, B., Boujnah, H.: (2018): Feeling machines for online detection and compensation of tool deflection in millingCIRP Annals - Manufacturing Technology 67 (2018), S. 423–426. | Datei |
  • Denkena, B., Breidenstein, B., Bergmann, B., Krödel, A.: (2018): Laser material removal on cutting tools from different materials and its effect on wear behaviorMetal Powder Report, Vol. 73 (2018) 1, S. 26-31. | Datei |
  • Denkena, B., Breidenstein, B., Brenne, F., Wu, L., Niendorf. T.: (2018): Effect of Post-Process Machining on Surface Properties of Additively Manufactured H13 Tool Steel. Einfluss der Nachbearbeitung auf Oberflächeneigenschaften von additiv gefertigtem H13-Werkzeugstahl HTM, J. Heat Treatm. Mat., 73 (2018) 4, S. 173-185. | Datei |
  • Denkena, B., Breidenstein, B., Prasanthan, V.: (2018): Influence of Tool Properties on the Thermomechanical Load during Turning of Hybrid Components and the Resulting Surface Properties. Einfluss von Werkzeugeigenschaften auf die thermomechanische Belastung beim Außenlängsdrehen hybrider Bauteile und die resultierenden Oberflächeneigenschaften HTM, J. Heat Treatm. Mat. 73 (2018) 4, S. 223-231. | Datei |
  • Denkena, B., Breidenstein, B., Ventura, C.: (2018): Influence of customized cutting edge geometries on the workpiece residual stress in hard turningJournal of Engineering Manufacture, 2018, Vol. 232 (12), S. 2132 - 2139. | Datei |
  • Denkena, B., Dittrich, M.-A., Jacob, S., Uhlich, F.: (2018): Fertigungsplanung und -steuerung für die vernetzte Produktion von morgenwt Werkstattstechnik online, Jahrgang 108 (2018) H. 4, Seite 235-239. | Datei |
  • Denkena, B., Dittrich, M.-A., Liu, Y.: (2018): A new process chain for recycling of cemented carbide milling toolsProduction Engineering Research and Development (WGP), Volume 12 (2018) Number 3-4, S. 547-553. | Datei |
  • Denkena, B., Dittrich, M.-A., Uhlich, F., Wichmann, M., Mücke, M.: (2018): Process parallel simulation of workpiece temperatures using sensory workpiecesCIRP Journal of Manufacturing Science and Technology, Vol. 21 (2018), S. 140-149. | Datei |
    DOI: 10.1016/j.cirpj.2018.01.004
  • Denkena, B., Dittrich, M.-A., Uhlich, F.: (2018): Self-optimizing tool path generation for 5-axis machining processesCIRP Journal of Manufacturing Science and Technology, published online: 07 December 2018, 6 Seiten. | Datei |
    DOI: 10.1016/j.cirpj.2018.11.005
  • Denkena, B., Grove, T., Göttsching, T.: (2018): Grinding tool design for the manufacturing of UHC-steelThe International Journal of Advanced Manufacturing Technology, Vol. 95 (2018), S. 267-275. | Datei |
    DOI: 10.1007/s00170-017-1029-z
  • Denkena, B., Grove, T., Krödel, A.: (2018): Influence of pulsed laser ablation on the surface integrity of PCBN cutting tool materialsThe International Journal of Advanced Manufacturing Technology, published online: 23 November 2018, 12 Seiten. | Datei |
    DOI: 10.1007/s00170-018-3032-4
  • Denkena, B., Grove, T., Maiß, O., Krödel, A., Schwab, H., Kühn, U.: (2018): Cutting mechanism and surface integrity in milling of Ti-5553 processed by selective laser melting†Journal of Mechanical Science and Technology, Vol. 32 (2018) 10, S. 4883 - 4892. | Datei |
  • Denkena, B., Grove, T., Theuer, M.: (2018): Micro crack formation in hardmetall milling toolsInternational Journal of Refractory Metals & Hard Materials, 70 (2018), S. 210-214. | Datei |
  • Denkena, B., Mücke, A., Schumacher, T., Langen, D., Hassel, T.: (2018): Technology-Based Recontouring of Blade Integrated Disks After Weld RepairJournal of Engineering for Gas Turbines and Power, Vol. 140 (2018), S. 121015/1 - 121015/8. | Datei |
    DOI: 10.1115/1.4040738
  • Felix, C. (2018): Logistische Modellierung von Montagesystemenwt Werkstattstechnik online Jahrgang 108, Heft 4, Düsseldorf: Springer-VDI-Verlag, S. 263-266
  • Gerdes, N.; Fokken, L. G.; Linke, S.; Kaierle, S.; Suttmann, O.; Hermsdorf, J.; Stoll, E.; Trentlage, C. (2018): Selective Laser Melting for processing of regolith in support of a lunar baseJournal of Laser Applications, Vol. 30, 032018.
    DOI: 10.2351/1.5018576
  • Groß, L., Herwig, A., Berg, D.C., Schmidt, C., Denkena, B., Horst, P., Meiners, D.: (2018): Production-based design of a hybrid load introduction element for thin-walled CFRP StructuresProduction Engineering Research and Development (WGP), Volume 12 (2018) Number 2, April 2018, S. 113-120. | Datei |
    DOI: 10.1007/s11740-018-0821-4
  • Hartmann, J., Kenneweg, R., Gierschner, F., Geist, M., Dittrich, M.-A., Böß, V., Neumann, I.: (2018): Optimierung des Materialauftrags an Megayachtenzfv, 143 (2018) 6, S. 384 - 389. | Datei |
    DOI: 10.12902/zfv-0227-2018
  • Herberger, D.; Nyhuis, P. (2018): Gestaltung von Kommunikationsprozessen in ProduktionsnetzwerkenZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb: Vol. 113, No. 5, pp. 272-276.
    DOI: 10.3139/104.111908
  • Herwig, A., Horst, P., Schmidt, C., Pottmeyer, F., Weidenmann, K.A.: (2018): Design and mechanical characterisation of a layer wise build AFP insert in comparison to a conventional solutionProduction Engineering Research and Development (WGP), Volume 12 (2018) Number 2, April 2018, S. 121-130. | Datei |
    DOI: 10.1007/s11740-018-0815-2
  • Hoff, C.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2018): Laser beam ablation of thick steel plates without affecting the material underneathProceedings Volume 10525, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII; 105250I, SPIE LASE, San Francisco, California, United States
    DOI: 10.1117/12.2287752
  • Hohnholz, A.; Schütz, V.; Albrecht, D.; Koch, J.; Suttmann, O.; Overmeyer, L. (2018): Simulation of an efficient particle extraction for the detection of explosive materialsJournal of Laser Applications, Vol. 30, 032201, Laser Institute of America
    DOI: 10.2351/1.5040606
  • Koch, S.; Behrens, B.-A.; Hübner, S.; Scheffler, R.; Wrobel, G.; Pleßow, M.; Bauer, D. (2018): 3D CAD modeling of deep drawing tools based on a new graphical languageComputer-Aided Design and Applications, 15(2018)5, S. 619 – 630 | Datei |
    DOI: https://doi.org/10.1080/16864360.2018.1441228
  • Krimm, R.; Behrens, B.-A.; Koß, J. (2018): Energieeffizienz von Umformmaschinenwt Werkstattstechnik online, 10-2018, S. 646-651
  • Lahdo, R.; Springer, A.; Meier, O.; Kaierle, S.; Overmeyer, L. (2018): Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser Journal of Laser Applications, Vol. 30, 032422, Laser Institute of America.
    DOI: 10.2351/1.5040643
  • Long Y, Dencker F, Isaak A, Hermsdorf J, Wurz MC, Twiefel J (2018): Self-Cleaning Mechanisms in Ultrasonic Bonding of Al WireJournal of Materials Processing Technology, Vol 258 Weitere Informationen
    DOI: 10.1016/j.jmatprotec.2018.03.016
  • Long Y, Dencker F, Isaak A, Li C, Schneider F, Hermsdorf J, Wurz MC, Twiefel J, Wallaschek J (2018): Revealing of ultrasonic wire bonding mechanisms via metal-glass bondingMaterials Science and Engineering B: Solid-State Materials for Advanced Technology, Vol 236-237
    DOI: 10.1016/j.mseb.2018.11.010
  • Lotz, C.; Wessarges, Y.; Hermsdorf, J.; Ertmer, W.; Overmeyer, L. (2018): Novel active driven drop tower facility for microgravity experiments investigating production technologies on the example of substrate-free additive manufacturingAdvances in Space Research 61 (2018) 1967–1974
    DOI: 10.1016/j.asr.2018.01.010
  • Lucht, T.; Schäfers, P.; Nyhuis, P. (2018): Durchgängige modellbasierte Bewertung von RegenerationslieferkettenZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (4), S. 220-224
    DOI: 10.3139/104.111893
  • Mishin M, Vorobyev A, Kondrateva A, Koroleva E, Karaseov P, Bespalova P, Shakhmin A, Glukhovskoy A, Wurz MC, Filimonov A (2018): The Mechanism of Charge Carrier Generation at the ТiO2 - n-Si Heterojunction Activated by Gold NanoparticlesSemiconductor Science and Technology, Vol 37(7)
    DOI: 10.1088/1361-6641/aac4f3
  • N. Vellguth, M. Shamsuyeva, S. Kroll, F. Renz, H.-J. Endres (2018): Electrical conductivity in biocomposites via polypyrrole coatingJournal of Materials Science Materials in Electronics 30, 2373-2381
    DOI: 10.1007/s10854-018-0510-2
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M., Maier, H-J.; Hassel, T.; Overmeyer, L. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructureJournal of Laser Applications, Vol. 30, 032417, Laser Institute of America
    DOI: 10.2351/1.5040607
  • Oubari, A.; Pischke, D.; Jenny, M.; Meißner, A.; Trübswetter, A. (2018): Mensch-Roboter-Kollaboration in der ProduktionZeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018) 9, S. 560–564
    DOI: 10.3139/104.111971
  • Pape, F., Maiss, O., Denkena, B., Poll, G.: (2018): COMPUTATIONAL APPROACH TO IMPROVE BEARINGS BY RESIDUAL STRESSES BASED ON THEIR REQUIRED BEARING FATIGUE LIFEInternational Journal of Computational Methods and Experimental Measurements, Vol. 6 (2018) 4, S. 656-666. | Datei |
  • Pape, F.; Coors, T.; Barroi, A.; Hermsdorf, J.; Mildebrath, M.; Hassel, T.; Kaierle, S.; Matthias, T.; Chugreev, T.; Chugreeva, A.; Behrens, B.-A.; Overmeyer, L.; Poll, G. (2018): Tribological Study on Tailored-Formed Axial Bearing WashersTribology Online, Vol. 13, No. 6 (2018) 320-326 | Datei |
    DOI: 10.2474/trol.13.320
    ISBN: 1881-2198
  • Pischke, D.; Recker, T.; Blankemeyer, S.; Oubari, A.; Raatz, A. (2018): Prozessspezifische Aufgabenzuordnung im MRK-Systemwt-online 9-2018, S. 592-596
  • Pischke, D.; Recker, T.; Blankemeyer, S.; Oubari, A.; Raatz, A. (2018): Prozessspezifische Aufgabenzuordnung im MRK-Systemwt-online 9-2018, S. 592-596
  • Preller, T.; Runge-Borchert, G.; Zellmer, S.; Menzel, D.; Saein, S. A.; Peters, J.; Raatz, A.; Tiersch, B.; Koetz, J.; Garnweitner, G (2018): Particle-reinforced and functionalized hydrogels for SpineMan, a soft robotics applicationJournal of Materials Science 54 (7553), pp. 4444-4456
    DOI: 10.1007/s10853-018-3106-6
  • S. Spierling, E. Knüpffer, H. Behnsen, M. Mudersbach, H. Krieg, S. Springer, S. Albrecht, C. Herrmann, H.-J. Endres (2018): Bio-based plastics – A review of environmental, social and economic impact assessmentsJournal of Cleaner Production, 185, 476-491
  • Schlangen, S., Bremer, K., Zheng, Y., Böhm, S., Steinke, M., Wellmann, F., Neumann, J., Roth, B., Overmeyer, L. (2018): Long-period gratings in highly germanium-doped, single-mode optical fibers for sensing applicationsSensors (Switzerland), 18 (5), art. no. 1363, MDPI AG
    DOI: 10.3390/s18051363
  • Schmelt AS, Hofmann V, Fischer EC, Wurz MC, Twiefel J (2018): Design and Characterization of the Lateral Actuator of a Bimodal Tactile Display With Two Excitation DirectionsDisplays, Vol 54
    DOI: 10.1016/j.displa.2018.09.002
  • Schmidt, M.; Zähc, M.; Lid,L.; Dufloue, J.; Overmeyer, L.; Vollertsen, F. (2018): Advances in macro-scale laser processingCIRP Annals - Manufacturing Technology
    DOI: 10.1016/j.cirp.2018.05.006
  • Schneider, T.; Kruse, T.; Kuester, B.; Stonis, M.; Overmeyer, L. (2018): Evaluation of an energy self-sufficient sensor for monitoring marine gearboxesIn: Procedia Manufacturing, vol. 24 , pp. 135–140.
    DOI: 10.1016/j.promfg.2018.06.019
  • Seitz, M.; Sobotta, M.; Nyhuis, P. (2018): Einsatz von Data Mining im Regenerationsprozess von Schienenfahrzeug- Transformatoren. Potenziale für die Kapazitätsplanung und Angebotskalkulation.In: ZWF 113 (2018) 12; S. 814–818. Carl Hanser Verlag GmbH & Co. KG
    DOI: 10.3139/104.112025
  • V. Venkatachalam, S. Spierling, R. Horn, H.-J. Endres (2018): LCA and Eco-design: Consequential and Attributional Approaches for Bio-based PlasticsProcedia CIRP, 69, 579-584
    DOI: 10.1016/j.procir.2017.11.086
  • Wang, Y.; Overmeyer, L. (2018): Chip-on-Flex Packaging of Optoelectronic Devices in Polymer-Based Optical InterconnectsIEEE Journal of Selected Topics in Quantum Electronics.
    DOI: 10.1109/JSTQE.2018.2827674
  • Wesang,K.; von Witzendorff, P.; Suttmann, O.; Overmeyer, L. (2018): Local heat tempering with laser radiation for brilliant colors on glass surfaces Journal of Laser Applications, Vol. 30, 032508, Laser Institute of America
    DOI: 10.2351/1.5040608
  • Zhao, K., Hockauf, R., Liu, Z., Zhao, W., Wang, X., Wang, D.: (2018): Kinematic and stochastic surface topography of workpiece made of Al7075 in flank millingInternational Journal of Advanced Manufacturing Technology, published online: 24 February 2018, 11 Seiten. | Datei |
  • Behrens, B.-A.; Bonk, C.; Bouguecha, A.; Thürer, S. E.; Uhe, J.; Golovko, O.; Klose, C. (2017): Mechanical Properties of Co-Extruded Aluminium-Steel CompoundsKey Engineering Materials Volume 742
    DOI: https://doi.org/10.4028/www.scientific.net/KEM.742.512
  • Behrens, B.-A.; Bougecha, A., Bonk, C.; Chugreev, A. (2017): Experimental investigations on the transformation-induced plasticity in a high tensile steel under varying thermo-mechanical loading Computer Methods in Materials Science, Vol. 17, No. 1, 2017, pp. 36-43. | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Bonhage, M.; Chugreeva, A.; Matthias, T. (2017): FE-based Design of a Forging Tool System for a Hybrid Bevel GearKey Engineering Materials; ISSN: 1662-9795, Vol. 742, pp 544-551; doi:10.4028/ www.scientific.net/KEM.742.544
  • Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Matthias, T. (2017): Importance of material and friction characterisation for FE-aided process design of hybrid bevel gearsAIP Conference Proceedings 1896, 190016 (2017) | Datei |
    DOI: 10.1063/1.5008229
  • Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Yarcu, D.; Kazhai. M. (2017): Numerical and Experimental Investigations on an Extrusion Process for a Newly Developed Ultra-High-Carbon Lightweight Steel for the Automotive IndustryIOP Conf. Series: Materials Science and Engineering 179 (2017)
    DOI: 10.1088/1757-899X/179/1/012005
  • Behrens, B.-A.; Bouguecha, A.; Lerch, M.; Windhagen, H.; Almohallami, A. (2017): Influence of hip prosthesis size and its coating area on bone remodelling: A numerical inpestigation on a short stem uncemented hip implantIEEE Trans Nanobioscience. 2017 Sep 11.
    DOI: 10.1109/TNB.2017.2750724
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Grbic, N. (2017): Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limitsIOP Conf. Series: Materials Science and Engineering 179 (2017) 012006 | Datei |
    DOI: 10.1088/1757-899X/179/1/012006
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Schulze, H. (2017): Finite element analysis regarding the forming behaviour of symmetric hybrid structures consisting of two sheet metal outer layers and a thermoplastic coreIOP Conf. Series: Materials Science and Engineering 179 (2017) | Datei |
    DOI: 10.1088/1757-899X/179/1/012004
  • Behrens, B.-A.; Bräuer,G.; Hübner, S.; Jalanesh, M.; Lorenz, E.; Weber, M.; Zimbelmann, S. (2017): Development and validation of a new method for accelerated and economic wear testing of tool materials for deep drawing applications WEAR, 15 April 2017 Volumes 376–377, Part B, pp. 1814–1821 | Datei |
  • Behrens, B.-A.; Hübner, S.; Vogt, H. (2017): Umformung von höchstfesten Aluminiumlegierungenwt Werkstatttechnik online, Jahrgang 107, Ausg. 10, S. 695-699, Springer-VDI Verlag, Düsseldorf | Datei |
  • Behrens, B.-A.; Hübner, S.; Wölki, K. (2017): Acoustic emission – A promising and challenging technique for process monitoring in sheet metal formingJournal of Manufacturing Processes, Volume 29, pp. 281-288 | Datei |
  • Behrens, B.-A.; Krimm, R.; Altan, L.; Hasselbusch, T.; Ortmaier, T.; Dagen, M.; Ahrens, M. (2017): Miniaturisierte Schneidmaschine - Neuartiges Konzept zur Herstellung kleiner Stanzteile im Resonanzbetriebwt Werkstattstechnik online, Ausgabe 3 (2017), Springer-VDI-Verlag, Düsseldorf
  • Behrens, B.-A.; Lippold, L.; Puppa, J.; Hübsch, C.; Langen, D.; Möhwald, K. (2017): Steigerung der Verschleißbeständigkeit von Schmiedegesenken durch PVD-abgeschiedene Hartstoffschichten auf TitanbasisForschung im Ingenieurwesen (2017) 81:1-12 | Datei |
    DOI: 10.1007/s10010-016-0209-6
  • Behrens, B.-A.; Yarcu, D.; Petersen, T.; Ross, I. (2017): Induktive Erwärmung partiell verstärkter Presslingewt Werkstattstechnik online Jahrgang 107 (2017), Ausgabe 10, S. 700-705, Springer-VDI-Verlag, Düsseldorf | Datei |
  • Bluemel, S.; Kuklik, J.; Staehr, R.; Jaeschke, P.; Suttmann, O.; Overmeyer, L. (2017): Time resolved analysis of nanosecond pulsed laser processing of carbon fiber reinforced plasticsJournal of Laser Applications, Volume 29, Issue 2, 1 May 2017, Article number 022406.
    DOI: 10.2351/1.4983242
  • Bluemel, S.; Kuklik, J.; Staehr, R.; Jaeschke, P.; Suttmann, O.; Overmeyer, L. (2017): Time resolved analysis of nanosecond pulsed laser processing of carbon fiber reinforced plasticsJournal of Laser Applications 2 (29), 022406 (2017)
    DOI: 10.2351/1.4983242
  • Bouzakis, K.-D., Charalampous, P., Kotsanis, T., Skordaris, G., Bouzakis, E., Denkena, B., Breidenstein, B., Aurich, J. C., Zimmermann, M., Herrmann, T., M´saoubi, R.: (2017): Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performanceCIRP Journal of Manufacturing Science and Technology, Vol. 18 (2017), S. 188 - 197. | Datei |
    DOI: 10.1016/j.cirpj.2017.02.003
  • Breidenstein, B., Denkena, B., Mörke, T., Prasanthan, V.: (2017): Non-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress MeasurementKey Engineering Materials, Vol. 742 (2017), S. 613 - 620. | Datei |
    DOI: 10.4028/www.scientific.net/KEM.742.613
  • Dencker F, Dreyer L, Müller D, Zernetsch H, Paasche G, Sindelar R, Glasmacher B (2017): A silicone fiber coating as approach for the reduction of fibroblast growth on implant electrodesJournal of Biomedical Materials Research - Part B Applied Biomaterials, Vol 105(8), 2017
    DOI: 10.1002/jbm.b.33798
  • Denkena, B., Bergmann, B., Kaiser, S., Bolle, D., Behrmann, M.: (2017): Sensorüberwacht in die TiefeWB -Werkstatt und Betrieb, 12/2017, S. 40-42. | Datei |
  • Denkena, B., Bergmann, B., Schmidt, A.: (2017): Korrekte Dimensionierung der Maschine spart Kostenmav, 11/2017, S. 34-37. | Datei |
  • Denkena, B., Bergmann, B., Witt, M.: (2017): Automatic process parameter adaption for a hybrid workpiece during cylindrical operations International Journal Advanced Manufacturing Technology, Published online 20 October 2017, 6 Seiten. | Datei |
  • Denkena, B., Brühne, T.: (2017): Magnetlager für Werkzeugmaschinenrundtischeantriebstechnik, 10/2017, S. 108-111. | Datei |
  • Denkena, B., Brüning, J., Windels, L., Euhus, D., Kirsch, S., Overbeck, D., Lepper, T.: (2017): Holistic process planning chain for robot machiningProduction Engineering Research and Development, published online 03. November 2017, 8 Seiten. | Datei |
  • Denkena, B., Dahlmann, D., Peters, R., Witt, M.: (2017): MODEL BASED COMPENSATION OF GEOMETRICAL DEVIATIONS DUE TO PROCESS FORCES Journal of Machine Engineering, Vol. 17, No. 1 (2017), S. 5 - 16. | Datei |
  • Denkena, B., Dittrich, M.-A., Rahner, B.-H.: (2017): Smart and energy-efficient dust suction concept for milling of fibrereinforced plasticsProduction Engineering Research and Development (WGP), Volume 11 (2017) Number 6, S. 723-729. | Datei |
  • Denkena, B., Grove, T., Bouabid, A.: (2017): Das Einzelkornschleifen - Methode zur Analyse der Einzelkornbelastung und deren Auswirkungen auf den Verschleiß beim Schleifenwt Werkstattstechnik online, Jahrgang 107 (2017), Heft 6, S. 448 - 452. | Datei |
  • Denkena, B., Grove, T., Göttsching, T.: (2017): Material removal and chip formation mechanisms of UHC-steel during grindingInternational Journal of Advanced Manufacturing Technology, 16.03.2017, 9 S. | Datei |
    DOI: 10.1007/s00170-017-0270-9
  • Denkena, B., Grove, T., Maiß, O., Suntharakumaran, V.: (2017): New tool concept for grinding a plateau‑like surface for tribological applicationsProduction Engineering Research and Development (WGP), Juli 2017, 6 S. | Datei |
    DOI: 10.1007/s11740-017-0758-z
  • Denkena, B., Grove, T., Maiß, O.: (2017): Surface texturing of rolling elements by hard ball-end milling and burnishingInternational Journal of Advanced Manufacturing Technology, 25.07.2017, 9 S. | Datei |
    DOI: 10.1007/s00170-017-0809-9
  • Denkena, B., Grove, T., Mücke, A., Langen, D., Nespor, D., Hassel, T.: (2017): Residual stress formation after re-contouring of micro-plasma welded Ti6Al4 V parts by means of ball end milling. Eigenspannungsprofile an mikroplasmageschweißten und spanend rekonturierten Komponenten der Legierung Ti6Al4V Mat.-wiss. u. Werkstofftech. 2017, 48, S. 1034–1039. | Datei |
    DOI: DOI 10.1002/mawe.2016007431034
  • Denkena, B., Grove, T., Prasanthan, V., Eigenmann, B., Heni, Z., Feldmann, G., Brinkhaus, J.: (2017): Effects of an innovative deep rolling process on the subsurface properties of thin-walled componentsProceedings ICSP -13, Polytechnique Montreál, 18.09.-21.09.2017, S. 516-520. | Datei |
  • Denkena, B., Hülsemeyer, L., Bergmeier, M.: (2017): Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled modelProduction Engineering Research and Development (WGP), Juli 2017, 7 S. | Datei |
    DOI: 10.1007/s11740-017-0752-5
  • Denkena, B., Jacob, S., Wangenheim, C., Göing, F., Schlichting, C.: (2017): Optimale Prozesskettenauslegung in der additiven Fertigungproductivity 22 (2017), 2 Seiten. | Datei |
  • Denkena, B., Shanib, M., Damm, J., Bergmann, B.: (2017): Selbstparametrierende Prozessüberwachungssysteme. Selbstanpassende Prozessüberwachunsgsstrategien für die Serienfertigungwt Werkstattstechnik online, 107 (2017) H. 7/8, S. 487-491. | Datei |
  • Denkena, B., Stobrawa, S., Jenkner, I.: (2017): Kompetenzorientierte ArbeitsplatzwechselZWF, 112 (2017) 10, S. 640-643. | Datei |
  • Denkena, B., Winter, F., Pischke, D.: (2017): Personaleinsatz zielgerichtet planen und steuern ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, Jahrgang 112 (2017), Ausgabe 6, S. 406 - 409. | Datei |
  • Denkena, B., Wippermann, A., Busemann, S., Kuntz, M., Gottwik, L.: (2017): Comparison of residual strength behavior after indentation, scratching and grinding of zirconia-based ceramics for medical-technical applicationsJournal of the European Ceramic Society (2017), https://doi.org/10.1016/j.jeurceramsoc.2017.11.042, 9 Seiten. | Datei |
  • Dinulovic D, Shousha M, Haug M, Beringer S, Wurz MC (2017): Comparative Study of Microfabricated Inductors/Transformers for High-Frequency Power ApplicationsIEEE Transactions on Magnetics (Volume: 53, Issue: 11, Nov. 2017) Weitere Informationen
    DOI: 10.1109/TMAG.2017.2734878
  • Görke, M.; Bellmann, V. K.; Busch, J.; Nyhuis, P. (2017): Employee qualification by digital learning gamesProcedia Manufacturing 9 (2017), pp. 229-237
  • Grove, T., Mörke, T.: (2017): Assessment of mechanical loads based on surface integrity analysis of machined componentsCIRP Annals - Manufacturing Technology, Vol. 66 (2017), 4 S. | Datei |
    DOI: 10.1016/j.cirp.2017.04.030
  • Gunther, A.; Schneider, S.; Rezem, M.; Wang, Y.; Gleissner, U.; Hanemann, T.; Overmeyer, L.; Eduard Reithmeier, E.; Rahlves, M.; Bernhard Roth, B.; (2017): Automated misalignment compensating interconnecs based on self-written waveguideJournal of Lightwave Technology, Volume: PP, Issue: 99, Page 1 – 1. IEEE.
    DOI: 10.1109/JLT.2017.2692305
  • Hoeper, K.; Kriependorf, M.; Felix, C.; Nyhuis, P.; Tecklenburg, A. (2017): Rollenspezifische Ziele und Teamarbeit im OPDer Anaesthesist 66 (12), Springer Medizin Verlag GmbH, S. 953-960
    DOI: 10.1007/s00101-017-0380-7
  • Hoff C, Venkatesh A, Schneider F, Hermsdorf J, Bengsch S, Wurz MC, Kaierle S, Overmeyer L (2017): Chip-Bonding of Low-melting Eutectic Alloys on Flexible Substrates by Transmitted Laser Radiation Advanced Optical Technologies, 2017; Vol. 6 (3-4) Weitere Informationen
    DOI: 10.1515/aot-2017-0011
  • Hoff, C.; Venkatesh, A.; Schneider, A.; Hermsdorf, J.; Bengsch, S.; Wurz, M. C.; Kaierle, S.; Overmeyer, L. (2017): Chip bonding of low-melting eutectic alloys by transmitted laser radiationAdvanced Optical Technologies, ISSN (Online) 2192-8584, ISSN (Print) 2192-8576. De Gruyter.
    DOI: DOI 10.1515/aot-2017-0011
  • Hoffmann, G.-A.; Wolfer, T.; Reitberger, T.; Franke, J.; Suttmann, O.; Overmeyer, L. (2017): Improving partial wetting resolution on flexible substrates for application of polymer optical waveguidesOptical Engineering, 56(10), 103109, SPIE.
    DOI: 10.1117/1.OE.56.10.103109
  • Hoffmann, L.-S.; Kuprat, T.; Kellenbrink, C.; Schmidt, M.; Nyhuis, P. (2017): Priority rule-based planning approaches for regeneration processesProcedia CIRP 59 (2017), pp. 89-94
  • Hübner, M.; Liebrecht, C.; Malessa, N.; Kuhnle, A.; Nyhuis, P.; Lanza, G. (2017): Vorgehensmodell zur Einführung von Industrie 4.0 - Vorstellung eines Vorgehensmodells zur bedarfsgerechten Einführung von Industrie 4.0-Methoden wt Werkstattstechnik online 107 (4), S. 266-272
  • K. Albrecht, E. Baur, H.-J. Endres, R. Gente, N. Graupner; M. Koch, M. Neudecker, T. Osswald, P. Schmidtke, S. Wartzack, K. Webelhaus, J. Müssig (2017): Measuring fibre orientation in sisal fibre-reinforced, injection moulded polypropylene - Pros and cons of the experimental methods to validate injection moulding simulation.Journal Composites Part A, Applied Science and Manufacturing 95, 54–64
    DOI: 10.1016/j.compositesa.2016.12.022
  • Kaierle, S.; Overmeyer,L.; Alfred, I.; Rottwinkel, B.; Hermsdorf, J.; Wesling, V.; Weidlich, N. (2017): Single-crystal turbine blade tip repair by laser cladding and remeltingCIRP Journal of Manufacturing Science and Technology, Volume 19, November 2017, Pages 196-199, Elsevier.
    DOI: 10.1016/j.cirpj.2017.04.001
  • Knust, J.; Podszus, F.; Stonis, M.; Behrens, B.-A.; Overmeyer, L.; Ullmann, G. (2017): Preform optimization for hot forging processes using genetic algorithmsInternational Journal of Advanced Manufacturing Technology Volume 89, Issue 5-8, 1 March 2017, Pages 1623-1634.
    DOI: 10.1007/s00170-016-9209-9
  • Krämer, M.; Müller, C.W.; Hermann, M.; Decker, S.; Springer, A.; Overmeyer, L.; Hurschler, C.; Pfeifer, R. (2017): Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffnessJournal of the Mechanical Behavior of Biomedical Materials, Volume 75, November 2017, Pages 558-566, Elsevier Ltd.
    DOI: 10.1016/j.jmbbm.2017.08.024
  • L. Henke, N. Zarrinbakhsh, H.-J. Endres, M. Misra, A. K. Mohanty (2017): Biodegradable and Bio-based Green Blends from Carbon Dioxide-Derived Bioplastic and Poly(Butylene Succinate)Journal of Polymers and the Environment 25, 499-509
  • Lehmann R, Wengerowsky D, Schmidt HJ, Kumar M, Niebur A, Costa BFO, Dencker F, Klingelhöfer G, Sindelar R, Renz F (2017): Klimt artwork: red-pigment material investigation by backscattering Fe-57 Mössbauer spectroscopy, SEM and p-XRFScience and Technology of Archaeological Research, Vol 3(2), 2017
    DOI: 10.1080/20548923.2017.1399332
  • Loosen, F.; Backhaus, C.; Zeitler, J.; Hoffmann, G.-A.; Reitberger, T.; Lorenz, L.; Lindlein, N.; Franke, J.; Overmeyer, L.; Suttmann, O.; Wolter, K.-J.; Bock, K. (2017): Approach for the production chain of printed polymer optical waveguides - An overviewApplied Optics, Volume 56, Issue 31, 1 November 2017, Pages 8607-8617, OSA - The Optical Society.
  • Lotz, C.; Froböse, T.; Wanner, A.; Overmeyer, L.; Ertmer, W. (2017): Einstein-Elevator: A New Facility for Research from μg to 5 gGravitational and Space Research, Vol 5, No 2, p. 11-27.
    DOI: 10.2478/gsr-2017-0007
    ISSN: 2332-7774
  • Maiß, O., Grove, T., Denkena, B.: (2017): Influence of asymmetric cutting edge roundings on surface topographyProduction Engineering Research and Development (WGP), Juli 2017, 6 S. | Datei |
    DOI: 10.1007/s11740-017-0742-7
  • Mayer, J.; Nyhuis, P. (2017): Describing the influence of set-up optimised sequencing on output lateness of workstationsProduction Planning & Control 28 (10), pp. 791-801
    DOI: 10.1080/09537287.2017.1314038
  • Nyhuis, P.; Mayer, J. (2017): Logistic modelling of lateness distributions in inventory systemsProduction Engineering 11 (3), pp. 343-355
    DOI: 10.1007/s11740-017-0741-8
  • Nyhuis, P.; Mayer, J. (2017): Modelling the influence of setup optimized sequencing on lateness and productivity behaviour of workstationsCIRP Annals - Manufacturing Technology 66 (1), pp. 421-424
    DOI: 10.1016/j.cirp.2017.04.008
  • Obata, K.; Schonewille, A.; Slobin, S.; Hohnholz, A.; Unger, C.; Koch, J.; Suttmann, O.; Overmeyer, L. (2017): Hybrid 2D patterning using UV laser direct writing and aerosol jet printing of UV curable polydimethylsiloxaneApplied Physics Letters, Volume 111, Issue 12, 18 September 2017, Article number 121903, American Institute of Physics Inc.
    DOI: 10.1063/1.4996547
  • Obata, K.; Slobin, S.; Schonewille, A.; Hohnholz, A.; Unger, C.; Koch, J.; Suttmann, O.; Overmeyer, L. (2017): UV laser direct writing of 2D/3D structures using photo-curable polydimethylsiloxane (PDMS)Applied Physics A: Materials Science and Processimg, 123 (7), 495.
    DOI: 10.1007/s00339-017-1104-1
  • Pape, F., Neubauer, T., Maiß, O., Denkena, B., Poll, G.: (2017): Influence of Residual Stresses Introduced by Manufacturing Processes on Bearing Endurance TimeTribology Letters, (2017), S. 65 - 70. | Datei |
    DOI: 10.1007/s11249-017-0855-3
  • Pohl, L.; von Witzendorff, P.; Chatzizyrli, E.; Suttmann, O.; Overmeyer, L. (2017): CO2 laser welding of glass: numerical simulation and experimental studyInternational Journal of Advanced Manufacturing Technology, Volume 90, Issue 1-4, 1 April 2017, Pages 397-403.
    DOI: 10.1007/s00170-016-9314-9
  • Runge, G.; Raatz, A. (2017): A framework for the automated design and modelling of soft robotic systemsCIRP Annals - Manufacturing Technology, Elsevier B.V., 2017, Vol. 66/1, pp. 9-12, ISSN 0007-8506, (4 pages)
    DOI: https://doi.org/10.1016/j.cirp.2017.04.104
  • Schäfers, P.; Walther, A. (2017): Modelling Circular Material Flow and the Consequences for SCM and PPCGlobal Journal of Business Research, Vol. 11, No. 2, S. 91-100.
  • Schmidt, M.; Merklein, M.; Bourell, D.; Dimitrov, D.; Hausotte, T.; Wegener, K.; Overmeyer, L. (2017): Laser based additive manufacturing in industry and academiaCIRP Journal of Manufacturing Science and Technology, CIRP Annals, 66 (2), pp. 561-583, Elsevier USA.
    DOI: 10.1016/j.cirp.2017.05.011
  • Schmidt, M.; Schäfers, P. (2017): The Hanoverian Supply Chain Model: modelling the impact of production planning and control on a supply chain’s logistic objectivesProduction Engineering, Vol. 11, Issue 4-5, S. 487–493.
    DOI: 10.1007/s11740-017-0740-9
  • Schneider, T.; Wortmann, J; Eilert, B.; Stonis, M.; Overmeyer, L. (2017): Validierung einer optischen Drehmomentmessungwt Werkstatttechnik online, 107. Jg. (2017), H. 9, S. 590-593. Weitere Informationen
  • Thürer, S. E., Uhe, J., Golovko, O., Bonk, C., Bouguecha, A., Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-extrusion of semi-finished aluminium-steel compoundsAIP Conference Proceedings | Datei |
    DOI: 10.1063/1.5008158
  • Uttendorf, S.; Eilert, B.; Overmeyer, L. (2017): Combining a fuzzy inference system with an A* algorithm for the automated generation of roadmaps for Automated Guided VehiclesIn: at – Automatisierungstechnik, Band 65, Heft 3,Seiten 189–197, ISSN (Online) 2196-677X, ISSN (Print) 0178-2312.
    DOI: https://doi.org/10.1515/auto-2016-0081
  • van Drunen WJ, Lachheb SK, Glukhovskoy A, Twiefel J, Wurz MC, Lenarz T, Rau TS, Majdani O (2017): Investigation of intracochlear dual actuator stimulation in a scaled test rigCurrent Directions in Biomedical Engineering, Vol 3(2)
    DOI: 10.1515/cdbme-2017-0024
  • van Drunen WJ, Mueller M, Glukhovskoy A, Salcher R, Wurz MC, Lenarz T, Maier H (2017): Feasibility of Round Window Stimulation by a Novel Electromagnetic MicroactuatorBioMed Research International, Vol 2017
    DOI: 10.1155/2017/6369247
  • von Witzendorff, P.; Dao, Q. H.; Suttmann, O.; Skubacz-Feucht, A.; Overmeyer, L. (2017): Production of Meshed Microstrip Antennas with Laser PatterningLasers in Engineering 4-6 (37), 357–365 (2017)
  • Wippo, V.; Rettschlag, K.; Surjoseputro, W.; Jaeschke, P.; Suttmann, O.; Ziegmann, G.; Overmeyer, L. (2017): Laser transmission welding of semi-interpenetrating polymer networks-compositesJournal of Laser Applications, Volume 29, Issue 2, 1 May 2017, Article number 022407.
    DOI: 10.2351/1.4983244
  • Yilkiran, D;. Wulff, D.; Almohallami, A.; Özkaya, F.; Bouguecha, A.; Hübner, S.; Möhwald, K.; Maier, H. J.; Behrens, B.-A. (2017): Wear behaviour of thermally oxidised tool surfaces as low-friction separation layers for dry sheet metal formingWear Vol. 376 – 377 (2017) 1789 – 1803. Elsevier
    DOI: 10.1016/j.wear.2017.01.084
  • Yilkiran, D;. Wulff, D.; Almohallami, A.; Özkaya, F.; Bouguecha, A.; Hübner, S.; Möhwald, K.; Maier, H. J.; Behrens, B.-A. (2017): Wear behaviour of thermally oxidised tool surfaces as low-friction separation layers for dry sheet metal forming Wear Vol. 376 – 377 (2017) 1789 – 1803. Elsevier | Datei |
    DOI: 10.1016/j.wear.2017.01.084
  • Zaremba, D., Heitzmann, P., Overmeyer, L., Hillerns, L., Hassel, T. (2017): Automatable splicing method for steel cord conveyor belts - Evaluation of water jetting as a preparation processStrojniski Vestnik/Journal of Mechanical Engineering, 63 (10), pp. 590-596, Assoc. of Mechanical Eng. and Technicians of Slovenia.
    DOI: 10.5545/sv-jme.2017.4363
  • Almohallami, A.; Rusch, M.; Vucetic, M.; Bouguecha, A.; Bambach, M.; Behrens, B. A. (2016): Joining by Upset Bulging at Elevated TemperaturesAdvanced Materials Research, Vol. 1140, pages 115-122 | Datei |
  • B. F. O. Costa BFO, Lehmann R, Wengerowsky D, Blumers M, Sansano A, Rull F, Schmidt H-J, Dencker F, Niebur A, Klingelhöfer G, Sindelar R, Renz F (2016): Klimt artwork (Part II): material investigation by backscattering Fe-57 Mössbauer- and Raman- spectroscopy, SEM and p-XRFHyperfine Interactions, Vol 237(1), 2016 Weitere Informationen
    DOI: 10.1007/s10751-016-1263-z
  • Barroi, A.; Albertazzi Gonçalves, D.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2016): Influence of Laser Power on the Shape of single Tracks in Scanner based Laser Wire CladdingPhysics Procedia (83), S. 667-673.
    DOI: 10.1016/j.phpro.2016.08.069
  • Barroi, A.; Zimmermann, F.; Hermsdorf, J.; Kaierle, S.; Wesling, V.; Overmeyer, L. (2016): Evaluation of the laser assisted double wire with nontransferred arc surfacing process for claddingJournal of Laser Applications 2 (28), 022306.
  • Becker, J.; Arnold, R.; Nyhuis, P. (2016): Potenziale der Distributionslogistik nutzenWerkstattstechnik online 106 (4), S. 266-272 Weitere Informationen
  • Becker, J.; Görke, M., Felix, C.; Schmidt, M. (2016): Model-based Potential Analysis of the Distribution Logistics: A Case StudyProduction Planning & Control Vol. 27, Issue 9, pp. 698-707 Weitere Informationen
    DOI: 10.1080/09537287.2016.1166279
  • Behr, M., Schmidt, C.: (2016): Systematic Process Chain Creation for CFRP Structures in Early Product Development StagesAdvanced Materials Research, Vol. 1140 (2016), S. 328 - 334. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.1140.328
  • Behrens B.-A.; Koch, S.; Pleßow, M.; Wrobel, G.; Bauer, D.; Scheffler R. (2016): Eine neue Modellierung von Tiefziehwerkzeugenwt Werkstattstechnik online, 10-2016, S. 690-694
  • Behrens, B-A.; Lippold, L.; Kazhai, M.; Bouguecha, A.; Vucetic, M.; Hübsch, C.; Möhwald, K. (2016): Prediction and Detection of Wear Mechanisms on an Industry-Oriented Hot Forging DieAdvanced Materials Research, Vol. 1140, S. 91-98, Trans Tech Publications | Datei |
    DOI: 10.4028/www.scientific.net/AMR.1140.91
  • Behrens, B.-A. Prof.; Bouguecha, A.; Vucetic, M.; Huskic, A.; Uhe, J.; Frischkorn, C.; Matthias, T.; Stakhieva, A.; Duran, D.; Thürer, S. E.; Golovko, O.; Klose, C. (2016): Umformtechnische Herstellung hybrider Lagerbuchsenwt Werkstattstechnik online, Jahrgang 106 (2016) H. 10
  • Behrens, B.-A.; Betancur Escobar, S.; Niemeier, H.; Vucetic, M.; Bouguecha, A.; Lucas, K.; Nolte, I.; Wefstaedt, P.; Lerch, M.; Stukenborg-Colsman, C.; Almohallami, A. (2016): Design and manufacturing of a human standardised hip cup out of titanium: Konstruktion und Fertigung einer menschlichen standardisierten Hüftpfannenprothese aus TitanMaterialwissenschaft und Werkstofftechnik 47(7) | Datei |
  • Behrens, B.-A.; Bougecha, A.; Brunotte, K.; Dannenberg, M.; Huskic, A.; Bonhage, M. (2016): Reprocessing of aluminum chips by hot backward extrusionProduction Engineering
    DOI: 10.1007/s11740-016-0682-7
  • Behrens, B.-A.; Bouguecha, A.; Peshekhodov, I.; Schneider, M. (2016): A new approach for user-independent determination of formability of a steel sheet sheared edgeProd. Eng. Res. Devel. (2016) 10, S. 241–252 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M. ; Chugreev, A. (2016): Advanced Wear Simulation for Bulk Metal Forming ProcessesMATEC Web of Conferences, Vol. 80-2016, 04003, pp. 1-4, DOI: http://dx.doi.org/10.1051/matecconf/20168004003 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Chugreev, A.; Rosenbusch, D. (2016): Advanced finite element analysis of die wear in sheet-bulk metal forming processesAIP Conference Proceedings, 1769, 130010 (2016), DOI:http://dx.doi.org/10.1063/1.4963529 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Kazhai, M.; Ganin, S.; Matveev, M. (2016): Physical simulation of precipitation hardened ferrite-pearlite steels during hot deformation processingMaterials Physics and Mechanics, Ausg.: 25; S.: 9-15 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanicalAIP Conf. Proc. 1769, 130013 (2016) | Datei |
    DOI: http://dx.doi.org/10.1063/1.4963532
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M; Bonhage, M.; Malik, I. Y. (2016): Numerical investigation for the design of a hot forging die with integrated cooling channelsProcedia Technology, Vol.: 26, 2016, pp. 51–58 http://dx.doi.org/10.1016/j.protcy.2016.08.008
  • Behrens, B.-A.; Dannenberg, M.; Mohammadifard, S.; Offers, J.-D.; Santangelo, A. (2016): Produktionsangepasste Konstruktionwt Werkstattstechnik online Jahrgang 106, H. 3, S. 175-180
  • Behrens, B.-A.; Dannenberg, M.; Mohammadifard, S.; Offers, J.-D.; Santangelo, A. (2016): Produktionsangepasste Konstruktionwt Werkstattstechnik online Jahrgang 106, H. 3, S. 175-180
  • Behrens, B.-A.; Krimm, R.; Reich, D.; Teichrib, S. (2016): Linear Drives in Metal Forming Machines and Peripherals – Recent DevelopmentsJournal of Manufacturing Processes 22, Elsevier, Amsterdam, S. 192 - 198, März 2016
  • Behrens, B.-A.; Puppa, J.; Huskic, A.; Brunotte, K.; Bouguecha, A.; Prüß, T. (2016): Influence of heat pipe cooling on the wear of hot forging diesProd. Eng. Res. Devel | Datei |
    DOI: 10.1007/s11740-016-0698-z
  • Behrens, Bernd-Arno; Bouguecha, Anas; Buse, Christian; Wölki, Kai; Santangelo, Adrian (2016): Potentials of in situ monitoring of aluminium alloy forging by acoustic emissionArchives of Civil and Mechanical Engineering, Volume 16, Issue 4, September 2016, pp 724-733 | Datei |
    DOI: 10.1016/j.acme.2016.04.012
  • Bellmann, V. K. (2016): Systematik zur effizienten Methodenauswahl - Berücksichtigung von Mitarbeiterkompetenzen und Unternehmenscharakteristika bei der zielgerichteten MethodenauswahlIndustrie 4.0 Management 32 (3), S. 43-46
  • Bellmann, V. K.; Nyhuis, P. (2016): Effiziente Produktionsgestaltung - Entwicklung eines Software-Tools zur prozess- und kompetenzorientierten MethodenauswahlWerkstattstechnik online 106 (7-8), S. 544-549
  • Bellmann, V. K.; Schmidt, M. (2016): Integrated Concept for the Selection of Process-improving and Competence-increasing Methods for the ShopfloorUniversal Journal of Management 4 (10), pp. 587 - 592
  • Bernd-Arno Behrens, Anas Bouguecha, Adis Huskic, Markus Baumer, Hanno Paschke, Lennard Lippold (2016): Increasing the efficiency of forging operations using adjusted tribological surfaces enhanced by hard coatingsTribology Online Vol. 11 (2016) No. 2 ITC Tokyo 2015 Special Issue (Part 1) p. 432-443 | Datei |
    DOI: 10.2474/trol.11.432
  • Blümel, S.; Bastick, S.; Stähr, R.; Jäschke, P.; Suttmann, O.; Overmeyer, L. (2016): Laser cutting of CFRP with a fibre guided high power nanosecond laser source - Influence of the optical fibre diameter on quality and efficiencyPhysics Procedia (83), S. 328–335.
    DOI: 10.1016/j.phpro.2016.08.034
  • Blumenthal, P.; Molin, C.; Gebhardt, S.; Raatz, A. (2016): Active electrocaloric demonstrator for direct comparison of PMN-PT bulk and multilayer samplesFerroelectrics, 497:1, pp. 1-8
    DOI: 10.1080/00150193.2016.1160466
  • Blumenthal, P.; Raatz, A. (2016): Classification of electrocaloric cooling device typesEPL, 115 (2016) 17004 Weitere Informationen
    DOI: 10.1209/0295-5075/115/17004
  • Bollgruen, P.; Gleissner, U.; Wolfer, T.; Megnin, C.; Mager, D.; Overmeyer, L.; Korvink, J. G.; Hanemann, T. (2016): Ink-jet printed fluorescent materials as light sources for planar optical waveguides on polymer foilsOptical Engineering 55 (10), 107107, SPIE
    DOI: 10.1117/1.OE.55.10.107107
  • Borchert, G.; Raatz, A. (2016): A new method for combining handling systems with passive orientation devicesCIRP Annals - Manufacturing Technology, Elsevier B.V., 2016, Vol. 65/1, pp. 49-52, ISSN 0007-8506, (4 pages)
  • Böß, V., Denkena, B., Dittrich, M.-A., Henning, S.: (2016): Geometrical Contact Zone Analysis of the Skive Hobbing ProcessAdvanced Materials Research, Vol. 1140 (2016), S. 157 - 164. | Datei |
  • Böß, V., Denkena, B., Wesling, V., Kaierle, S., Rust, F., Nespor, D., Rottwinkel, B.: (2016): Repairing parts from nickel base material alloy by laser cladding and ball end millingProduction Engineering Research and Development (WGP), Vol. 10, Issue 4, S. 433 – 441. | Datei |
    DOI: 10.1007/s11740-016-0690-7
  • Breidenstein, B., Denkena, B., Mörke, T., Hockauf, R.: (2016): Markierungsfreie Bauteil-Identifikationwt Werkstattstechnik online, Jahrgang 106 (2016), Heft 6, S. 412 - 415. | Datei |
  • Busch, J.; Blankemeyer, S.; Raatz, A.; Nyhuis, P. (2016): Implementation and testing of a genetic algorithm for a self-learning and automated parameterisation of an aerodynamic feeding systemProcedia CIRP 44 (2016) pp. 79-84, (6th CIRP Conference on Assembly Technologies and Systems (CATS), Gothenburg, Sweden), (6 pages)
    DOI: 10.1016/j.procir.2016.02.081
    ISBN: 2212-8271
  • C. Vogt, H.-J. Endres, J. Bühring, H. Menzel (2016): Reduction of the Elongation at Break of Thermoplastic Polyolefins through Melt Blending with Polylactide and the Influence of the Amount of Compatibilizers and the Viscosity Ratios of the Blend Components on Phase Morphology and MechanicsPolymer Engineering and Science
    DOI: 10.1002/pen.24319
  • Denkena, B., Dahlmann, D., Mücke, M.: (2016): Sensorische Werkstückewt Werkstattstechnik online, Jahrgang 106 (2016), Heft 11/12, S. 815 - 820. | Datei |
  • Denkena, B., Dittrich, M. A., Winter, F., Wagener, C.: (2016): Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systemsProduction Engineering Research and Development (WGP), Vol. 10, Issue 4, S. 489 – 496. | Datei |
    DOI: 10.1007/s11740-016-0693-4
  • Denkena, B., Dittrich, M., Winter, F.: (2016): Nutzung von Betriebsdaten zur Produktionsplanungwt Werkstattstechnik online, Jahrgang 106 (2016), Heft 3, S. 141 - 145. | Datei |
  • Denkena, B., Grove, T., Bremer, I., Behrens, L.: (2016): Design of bronze-bonded grinding wheel propertiesCIRP Annals - Manufacturing Technology, Vol. 65 (2016), S. 333 – 336. | Datei |
    DOI: 10.1016/j.cirp.2016.04.096
  • Denkena, B., Grove, T., Busemann, S., Lehr, C. M.: (2016): The effect of different manufacturing process parameters on the bond strength between Y-TZP and a veneering ceramic Biomedical Engineering, Vol. 61 (2016), S. 184. | Datei |
    DOI: 10.1515/bmt-2016-5014
  • Denkena, B., Grove, T., Harmes, J.: (2016): Grinding of Riblets on Curved PathsMaterials Science Forum, Vol. 874 (2016), S. 28 - 33. | Datei |
    DOI: 10.4028/www.scientific.net/MSF.874.28
  • Denkena, B., Grove, T., Lucas, H.: (2016): Influences of grinding with Toric CBN grinding tools on surface and subsurface of 1.3344 PM steelJournal of Materials Processing Technology, Vol. 229 (2016), S. 541 – 548. | Datei |
    DOI: 10.1016/j.jmatprotec.2015.09.039
  • Denkena, B., Grove, T., Prasanthan, V., Röttger, K., Heni, Z., Zenk, S.: (2016): Innovatives Zangenwalzwerkzeugwt Werkstattstechnik online, Jahrgang 106 (2016), Heft 7/8, S. 571 - 575. | Datei |
  • Denkena, B., Grove, T., Tatzig, L.: (2016): A Mechanical Model of Diamond Wire Sawing of Steel StructuresMaterials Science Forum, Vol. 874 (2016), S. 22 - 27. | Datei |
    DOI: 10.4028/www.scientific.net/MSF.874.22
  • Denkena, B., Grove, T., Tatzig, L.: (2016): Internally Cooled Toric Tools for Grinding of Medical CeramicsAdvanced Materials Research, Vol. 1136 (2016), S. 678 - 683. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.1136.678
  • Denkena, B., Schindler, A., Woiwode, S.: (2016): Calculation method of the contact area in flank machining for continuous generating grindingApplied Mathematical Modelling, Vol. 40 (2016), S. 7138 – 7146. | Datei |
    DOI: 10.1016/j.apm.2016.02.030
  • Denkena, B., Schmidt, C., Völtzer, K., Hocke, T.: (2016): Thermographic online monitoring system for Automated Fiber Placement processesComposites Part B, Vol. 97 (2016), S. 239 - 243. | Datei |
    DOI: 10.1016/j.compositesb.2016.04.076
  • Diekmann, J., Bauer, S., Weizbauer, A., Willbold, E., Windhagen, H., Helmecke, P., Lucas, A., Reifenrath, J., Nolte, I., Ezechieli, M.: (2016): Examination of a biodegradable magnesium screw for the reconstruction of the anterior cruciate ligament: A pilot in vivo study in rabbitsMaterials Science and Engineering C, Vol. 59 (2016), S. 1100 – 1109. | Datei |
    DOI: 10.1016/j.msec.2015.11.037
  • Dittmar, H.; Herda, P.; Jäschke, P.; Suttmann, O.; Overmeyer, L. (2016): Optimising Process Efficiency During Remote Laser Cutting of CFRP by Utilisation of a Double-scan-headPhysics Procedia (83), S. 1279-1288.
    DOI: 10.1016/j.phpro.2016.08.135
  • Dreier, S., Brüning, J., Denkena, B.: (2016): Simulation based reduction of residual stress related part distortionMaterials Science and Engineering Technology, Vol. 47, No. 8 (2016), S. 710 - 717. | Datei |
    DOI: 10.1002/mawe.201600604
  • Düsing JF.; Koch, J.; Suttmann,O.; Overmeyer, L. (2016): Closed-loop Process Control for Laser Patterning of Thin Film Strain SensorsProcedia Technology vol. 26 , pp. 113-119.
    DOI: 10.1016/j.protcy.2016.08.016
  • Emde, B.; Huse, M.; Hermsdorf, J.; Kaierle, S.; Wesling, V.; Overmeyer, L.; Kozakov, R.; Uhrlandt, D. (2016): Significance of the resonance condition for controlling the seam position in laser-assisted TIG weldingPhysics Procedia (83), 568–576.
    DOI: 10.1016/j.phpro.2016.08.059
  • Ezechieli, M., Meyer, H., Lucas, A., Helmecke, P., Becher, C., Calliess, T., Windhagen, H., Ettinger, M.: (2016): Biomechanical properties of a novel biodegradable magnesium-based interference screwOrthopedic Reviews, Vol. 8:6445 (2016), S. 71 - 74. | Datei |
  • Golovko, O.; Puppa, J.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2016): Development of intelligent hot forging tools with increased wear resistance by cyclic edge-zone hardeningProceedings of the 10th TOOL Conference, Bratislava, October 4th to 7th, 2016, pp. 291-300 | Datei |
    ISBN: ISBN 978-3-200-04786-0
  • Görke, M.; Winkens, M; Dünnwald, M. (2016): Qualification of Employees for Production Ramp-UpGlobal Business & Economics Anthology 1 (March)
  • Göttsching, T., Wippermann, A., Grove, T.: (2016): Quick Stop Device to Analyze the Chip Formation Mechanisms in Face GrindingAdvanced Materials Research, Vol. 1140 (2016), S. 221 - 227. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.1140.221
  • Gröbel, D.; Schulte, R.; Hildebrand, P.; Lechner, M.; Engel, U.; Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, E.; Behrens, B.-A.; Hübner, S.; Vucetic, M.; Koch, S.; Merklein, M.: (2016): Manufacturing of functional elements by sheet-bulk metal forming processes. In: Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 63 – 80Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 63 – 80 | Datei |
  • Gröne, M.; Rosenbusch, D.; Krimm, R.; Behrens, B. (2016): Electromagnetic System to Improve the Manufacturing Accuracy at the Presence of Horizontal Process Forces.Production Engineering, 1140(2016), S. 369-376
  • Hoffmann, G.-A.; Reitberger, T.; Franke, J.; Overmeyer, L. (2016): Conditioning of Surface Energy and Spray Application of Optical Waveguides for Integrated Intelligent SystemsProcedia Technology, Volume 26, 2016, S. 169–176
    DOI: 10.1016/j.protcy.2016.08.023
  • Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; Rosenbusch, D.; Clausmeyer, T.; Nürnberger, F.; Vucetic, M.; Koch, S.; Hübner, S.; Behrens, B.-A.; Tekkaya, E.; Merklein, M. (2016): Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming, In: Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 5 – 15Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 5 – 15 | Datei |
  • Johannes Rittinger, Piriya Taptimthong, Lisa Jogschies, Marc C. Wurz, Lutz Rissing (2016): Magnetic microstructure analysis of sputter deposited permalloy thin films on a spin-on polyimide substrateMicrosystem Technologies: 1-6.
    DOI: 10.1007/s00542-015-2792-0
  • Kaierle, S.; Overmeyer, L.; Hoff, C.; Herzog, P.; Hermsdorf, J. (2016): Conditioning of copper material surfaces increasing the efficiency of continuous wave laser microweldingCIRP Journal of Manufacturing Science and Technology, Volume 14, 1 August 2016, Pages 66-70.
    DOI: 10.1016/j.cirpj.2016.05.006
  • Knust, J.; Podszus, F.; Stonis, M.; Behrens, B.-A.; Overmeyer, L.; Ullmann, G (2016): Preform optimization for hot forging processes using genetic algorithms International Journal of Advanced Manufacturing Technology, 29 July 2016, Pages 1-12.
    DOI: 10.1007/s00170-016-9209-9
  • Krebs, D.; Borchert, G.; Raatz, A. (2016): Simulation and Design of an Orientation Mechanism for Assembly SystemsProcedia CIRP 44 (2016) pp. 245-250 (6th CIRP Conference on Assembly Technologies and Systems (CATS), (6 pages)
    DOI: 10.1016/j.procir.2016.02.122
    ISBN: 2212-8271
  • Krühn, T.; Sohrt, S.; Overmeyer, L. (2016): Mechanical feasibility and decentralized control algorithms of small-scale, multidirectional transport modulesLogistics Research,December 2016, 9:16, Springer Berlin Heidelberg. Weitere Informationen
    DOI: 10.1007/s12159-016-0143-x
  • Kuprat, T.; Nyhuis, P. (2016): Designing capacity synchronization within the regeneration of complex capital goods Universal Journal of Management 4 (10), pp. 587-592
  • Kuprat, T.; Schmidt, M.; Nyhuis, P. (2016): Model-based analysis of reassembly processes within the regeneration of complex capital goodsProcedia CIRP 55 (2016), pp. 206-211
  • Lahdo, R.; Pfeifer, R.; Springer, A.; Kaierle, S.; Overmeyer, L. (2016): High-power laser welding of thick steel-aluminum dissimilar jointsPhysics Procedia (83), 396–405.
  • Lanza, G.; Nyhuis, P.; Majid Ansari, S.; Kuprat, T.; Liebrecht, C.: (2016): Befähigungs- und Einführungsstrategien für Industrie 4.0 - Vorstellung eines reifegradbasierten Ansatzes zur Implementierung von Industrie 4.0Zeitschrift für wirtschaftlichen Fabrikbetrieb 111 (1-2), S. 76-79
  • Leschke, J.; Barroi, A.; Kaierle, S.; Hermsdorf, J.; Overmeyer, L. (2016): Studies on the Robustness of Underwater Laser Cutting of S355J2+N Using a Yb:YAG Disk Laser SourcePhysics Procedia (83), 310-316.
    DOI: 10.1016/j.phpro.2016.08.032
  • Löffler, M., Andreas, K., Engel, U., Schulte, R., Groebel, D., Krebs, E., Freiburg, D., Biermann, D., Stangier, D., Tillmann, W., Weikert, T., Wartzack, S., Tremmel, S., Lucas, H., Denkena, B., Merklein, M.: (2016): Tribological measures for controlling material flow in sheet-bulk metal formingProduction Engineering Research and Development (WGP), Vol. 10, Issue 4, S. 459 - 470. | Datei |
    DOI: 10.1007/s11740-016-0695-2
  • Lübkemann, J.; Canitez, A.; Nyhuis, P. (2016): Analyse des Restrukturierungsbedarfs von FabrikenWerkstattstechnik online 106 (4), S. 255-259 Weitere Informationen
  • M. Akin, L. Rissing, V. Brokbals (2016): Flip and Fuse: A New Technique for Diffusive Coating of Organic, Flexible and Low Transition Temperature Substrates with Inorganic Materials in Roll-to-Roll Processes at Ambient ConditionsIEEE Transactions on Components, Packaging and Manufacturing Technology
    DOI: 10.1109/TCPMT.2016.2580758
  • M. Akin, M. Rezem, M. Rahlves, K. Cromwell, B. Roth, E. Reithmeier, M. Wurz, L. Rissing, H.-J. Maier (2016): Direct hot embossing of micro-elements by means of photostructurable polyimideJournal of Micro/Nanolithography, MEMS, and MOEMS (JM3)
  • M. Akin, M. Steggeman, L. Rissing (2016): Paper-based magnetics: Matching paper with permalloySpringer Cellulose
    DOI: 10.1007/s10570-016-1019-6
  • Magalhaes, F. C., Abrao, A. M., Denkena, B., Breidenstein, B., Mörke, T.: (2016): Analytical Modeling of Surface Roughness, Hardness and Residual Stress Induced by Deep RollingJournal of Materials Engineering and Performance, Dezember 2016, 9 S. | Datei |
    DOI: 10.1007/s11665-016-2486-5
  • Maiß, O., Denkena, B., Grove, T.: (2016): Hybrid machining of roller bearing inner rings by hard turning and deep rollingJournal of Materials Processing Technology, Vol. 230 (2016), S. 211 - 216. | Datei |
    DOI: 10.1016/j.jmatprotec.2015.11.029
  • Majid Ansari, S.; Wulf, S. (2016): Company-Specific Selection of Resource Efficiency MethodsGlobal Business & Economics Anthology 1 (March), pp. 12-20
  • Masood Jalanesh, Andre Miller, Marco Hehmann, André Spiekermeier, Sven Hübner, Bernd-Arno Behrens (2016): Process-integrated projection welding during deep drawingWGP-Kongress 05.09.2016-06.09.2016, Vol.1040 (2016) pp. 59-66 | Datei |
  • Mayer, J.; Nyhuis, P. (2016): Cybernetic Approach for Interdepartmental Cause-effect Relationship ModellingUniversal Journal of Management 4 (9), S. 488 - 499
    DOI: 10.13189/ujm.2016.040903
  • Merwart, M., Denkena, B., Dittrich, M. A.: (2016): Simulationsbasierte Bewertung von Weiterbildungen wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 4, S. 282 - 287. | Datei |
  • Neudecker, S.; Bruns, C.; Gerbers, R.; Heyn, J.; Dietrich, F.; Dröder, K.; Raatz, A.; Kloft, H. (2016): A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete Structures Without FormworkProcedia CIRP 43 (2016) pp. 333–338, (14th CIRP Conference on Computer Aided Tolerancing (CAT), Gothenburg, Sweden), (6 pages)
    DOI: 10.1016/j.procir.2016.02.107
  • Nielsen, L.; Schmidt, C.; Blume, S.; Schmidt, M.; Thiede, S.; Nyhuis, P.; Herrmann, C. (2016): Towards quantitative factory life cycle evaluationProcedia CIRP (55), pp. 266-271 Weitere Informationen
    DOI: 10.1016/j.procir.2016.08.009
  • Overmeyer, L.; Podszus, F.; Dohrmann, L. (2016): Multimodal speech and gesture control of AGVs, including EEG-based measurements of cognitive workload CIRP Annals - Manufacturing Technology, Vol. 65, No. 1, pp. 425-428.
    DOI: 10.1016/j.cirp.2016.04.030
  • Plat, K.; von Witzendorff, P.; Suttmann, O.; Overmeyer, L. (2016): Process strategy for drilling of chemically strengthened glass with picosecond laser radiationJournal of Laser Applications ,Volume 28, Issue 2, May 2016, Article number 022201.
    DOI: 10.2351/1.4944508
  • Reiners, J., Denkena, B.: (2016): Investigation on the Dynamic Behaviour of an Ultrasonic-Levitation Magnetic Guiding SystemAdvanced Materials Research, Vol. 1140 (2016), S. 377 - 383. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.1140.377
  • S. Albrecht, H.-J. Endres, E. Knüpffer, S. Spierling (2016): Biokunststoffe – quo vadis? Eine ökologische und sozio-ökonomische Betrachtunguwf UmweltWirtschaftsForum 24, 55-62
    DOI: 10.1007/s00550-016-0390-y
  • Schirrmacher, S,; Overmeyer, L.; Lorisch, S. (2016): Wireless condition monitoring of a marine gearboxShip Technology Research: Schiffstechnik, Volume 63, Issue 1, pp. 38-49, Taylor & Francis Group
    DOI: 10.1080/09377255.2015.1137427
  • Schmidt, M.; Nyhuis, P. (2016): Identification of Influencing Variables of Demand-oriented Measures for Volume FlexibilityUniversal Journal of Management 4 (11), S. 601-606
  • Schütz, V.; Bischoff, K.; Brief, S.; Koch, J; Suttmann,O; Overmeyer, L. (2016): Additional external electromagnetic fields for laser microprocessing of metals Optics Express Vol. 24, Issue 23, pp. 27046-27058.
    DOI: 10.1364/OE.24.027046
  • Schütz, V.; Young, K.; Matsumura, T.; Hanany, S.; Koch, J.; Suttmann, O.; Overmeyer, L.; Wen, Q (2016): Laser Processing of Sub-Wavelength Structures on Sapphire and Alumina for Millimeter Wavelength Broadband Anti-Reflection CoatingsJournal of Laser Micro/Nanoengineering 2 (11), 204–209
  • Skordaris, G., Bouzakis, K.D., Kotsanis, T., Charalampous, P., Bouzakis, E., Breidenstein, B., Bergmann, B., Denkena, B.: (2016): Effect of PVD film’s residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated toolsCIRP Journal of Manufacturing Science and Technology, Dezember 2016, 7 S. | Datei |
    DOI: 10.1016/j.cirpj.2016.11.003
  • Stähr, R.; Blümel, S.; Jäschke, P.; Suttmann, O.; Overmeyer, L. (2016): Laser cutting of composites—Two approaches toward an industrial establishmentJ. Laser Appl. 2 (28), 022203
    DOI: 10.2351/1.4943754 
  • Suttmann, O.; Düsing, J. F.; Overmeyer, L. (2016): Phenomenological Model for Prediction of Complex Ablation Geometries in Metal Films using Ultrashort Laser PulsesJournal of Laser Applications ,Volume 28, Issue 2, May 2016, Article number 022208.
    DOI: 10.2351/1.4944507
  • Tillmann, W., Stangier, D., Denkena, B., Grove, T., Lucas, H.: (2016): Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming toolsProduction Engineering Research and Development (WGP), Vol. 10, Issue 1, S. 17 - 24. | Datei |
    DOI: 10.1007/s11740-015-0653-4
  • Ventura, C. E. H., Chaves, H. S., Rubio, J. C. C., Abrao, A. M., Denkena, B., Breidenstein, B.: (2016): The influence of the cutting tool microgeometry on the machinability of hardened AISI 4140 steelInternational Journal of Advanced Manufacturing Technology, 19.10.2016, 9 S. | Datei |
    DOI: 10.1007/s00170-016-9582-4
  • Ventura, C., Breidenstein, B., Denkena, B.: (2016): Influence of customized cutting edge geometries on the workpiece residual stress in hard turningProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, November 2016, 8 S. | Datei |
    DOI: 10.1177/0954405416685388
  • Wang, Y.; Overmeyer, L. (2016): Chip-Level Packaging of Edge-Emitting Laser Diode onto Low-Cost Transparent Polymer Substrates using Optodic BondingIEEE Transactions on Components, Packaging and Manufacturing Technology, Vol.6 , No. 5, pp. 667-674
    DOI: 10.1109/TCPMT.2016.2543028
  • Wippo, V.; Mangold, J.; Jäschke, P.; Suttmann, O.; Overmeyer, L. (2016): Influence of moisture content in fiber reinforced polyetherimide on laser weld seam qualityJ. Laser Appl. 2 (28), 022419
  • Wippo, V.; Winter, Y.; Jäschke, P.; Suttmann, O.; Overmeyer, L. (2016): The influence of laser welding processes on the weld seam quality of thermoplastic composites with high moisture contentPhysics Procedia (83), 1064-1072.
  • Witt, M., Özsahin, O., Altintas, Y., Denkena, B.: (2016): Receptance coupling based algorithm for the identification of contact parameters at holder–tool interfaceCIRP Journal of Manufacturing Science and Technology, Vol. 13 (2016), S. 37 – 45. | Datei |
    DOI: 10.1016/j.cirpj.2016.02.005
  • Wolfer, T.; Bollgruen, P.; Mager, D.; Overmeyer, L.; Korvink, J. G. (2016): Printing and preparation of integrated optical waveguides for optronic sensor networksMechatronics, Oxford: Elsevier, Volume 34, 1 March 2016, Pages 119-127.
    DOI: 10.1016/j.mechatronics.2015.05.004
  • Wolff, J.; Yan, M.; Schultz, M.; Raatz, A. (2016): Reduction of Disassembly Forces for Detaching Components with Solidified Assembly ConnectionsProcedia CIRP 44 (2016) pp. 79-84 (6th CIRP Conference on Assembly Technologies and Systems (CATS), (6 pages)
    ISBN: 2212-8271
  • A. Almohallami, B.-A. Behrens, A. Bouguecha, M. Lerch, S. Betancur, C. Stukenborg-Colsman, I. Nolte, K. Lucas (2015): Numerical analysis of the biomechanical complications accompanying the total hip replacement with NANOS-Prosthetic: bone remodelling and prosthesis migrationCurrent Directions in Biomedical Engineering. Band 1, Heft 1, Seiten 381–385 | Datei |
    DOI: 10.1515/cdbme-2015-0093
    ISBN: 2364-5504
  • A. Wienecke, R. Kruppe, L. Rissing (2015): Influence of Growth Conditions on Exchange Bias of NiMn-based Spin ValvesJournal of Applied Physics, 117, 17C108
    DOI: 10.1063/1.4907231
  • Abrao, A. M., Denkena, B., Köhler, J., Breidenstein, B., Mörke, T.: (2015): The inducement of residual stress through deep rolling of AISI 1060 steel and its subsequent relaxation under cyclic loading International Journal of Advanced Manufacturing Technology, Vol. 79, Issue 9 - 12 (2015), S. 1939 - 1947. | Datei |
    DOI: 10.1007/s00170-015-6946-0
  • B. Viehweger, A. Sviridov, P. Grützner, B.-A. Behrens, A. Bouguecha, A. Almohallami (2015): Ermittlung von Verfahrensgrenzen für das Fügen durch Knickbauchen anhand des Werkstoffes E235+NVolume 46, Issue 8, pages 804–812, August 2015
  • B.-A. Behrens, A. Bouguecha, M. Vucetic, S. Betancur Escobar, C. Stukenborg-Colsman, M. Lerch, I. Nolte and A. Almohallami (2015): Numerische Betrachtung der biomechanischen Komplikationen begleitend zur Totalhüftgelenkprothese: Knochenumbau und ProthesenmigrationMaterialwissenschaft und Werkstofftechnik, Volume 46, Issue 9, pages 881–893, September 2015
  • B.-A. Behrens, R. Krimm, T. M. Demke, M. Gröne (2015): Vermeidung von Stößelversatz mit Elektromagneten. Aufbau und Konzept zur Integration einer Aktorik in Pressen zur Vermeidung von Stößelversatzwt Werkstattstechnik online Jahrgang 105 (2015) H. 10, S.687-691
  • B.-A. Behrens, S. Betancur Escobar, H. Niemeier, A. Almohallami, M. Vucetic, I. Nolte, K. Lucas, C. Stukenborg-Colsmann, M. Lerch, A. Bouguecha (2015): Fertigung einer universellen Hüftprothesenpfanne mittels HochdruckblechumformungMaterialwissenschaft und Werkstofftechnik, Volume 46, Issue 9, pages 894–910, September 2015
  • Barroi, A.; Zimmermann, F.; Hermsdorf, J.; Kaierle, S.; Wesling, V.; Overmeyer, L. (2015): Evaluation of the LDNA surfacing process for claddingICALEO 2015. Atlanta, 19.-22. Oktober.
  • Becker, J.; Fronia, P.; Nyhuis, P. (2015): A model-based Method for Assessing Potentials in Distribution LogisticsJCC: The Business and Economics Research Journal 8 (1), pp. 43-54
    DOI: 10.7835/jcc-berj-2015-0104
  • Becker, J.; Grigutsch, M.; Nyhuis, P. (2015): Dynamic and Future-Oriented Dimensioning of StockWorld Journal of Management 6 (1), pp. 171–182 Weitere Informationen
  • Behm, V.; Hoffmann, G.; Trzebiatowski, J.; Springer, A; Stefan Kaierle, S.; Overmeyer, L. (2015): Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steelsJ. Laser Appl. 27, S29006, Laser Institute of America (LIA).
    DOI: 10.2351/1.4906384
  • Behrens, B-A.; Bouguecha, A.; Bouguecha, S. M.; Klassen, A.; Bonhage, M. (2015): Conception of a hot forging die out of metal powder equipped with inner cooling channelsPowder Metallurgy, Volume 58, Issue 3, pp. 166-170
    DOI: 10.1179/0032589915Z.000000000239
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Hübner, S.; Yilkiran, D.; Jin, Y.; Peshekhodov, I. (2015): FEA-based optimisation of a clinching process with an open multiple-part die aimed at damage minimisation in CR240BH-AlSi10MnMg jointsMaterials science, Engineering and Chemistry Volume 21 – 2015, 04009-pp 1-7 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Hübner, S.; Yilkiran, D.; Jin, Y.; Peshekhodov, I. (2015): FEA-based optimisation of a clinching process with a closed single-part die aimed at damage minimisation in CR240BH-AlSi10MnMg jointsKey Engineering Materials, Vols 651-653 (2015) pp 1487-1492 | Datei |
  • Behrens, B.-A.; Huskic, A.; Frischkorn, C.; Duran, D. (2015): Fließpressen hybrider Halbzeugewt Werkstattstechnik online, Jahrgang 105 (2015), Ausgabe 10, S.704-708, Springer-VDI-Verlag, Düsseldorf. | Datei |
  • Behrens, B.-A.; Krimm, R.; Jocker, J.; Nitschke T. (2015): Leistungsverzweigter Servopressenantriebwt Werkstattstechnik online, Ausgabe 5-2015, S. 291-296, Springer-VDI-Verlag, Düsseldorf | Datei |
  • Behrens, B.-A.; Lachmayer, R.; Malik, I.; Bonhage, M.; Sauthoff, B.; Gottwald, P. (2015): Sensorik in Schmiedewerkzeugen Temperierung von Gesenken für die Warmmassivumformung steigert Präzision und reduziert Verschleiß wt-online 10-2015, Seite 692-696
  • Behrens, B.-A.; Prüß, T. (2015): Alternative Temperature Control of Closed Forging Dies Using Heat PipesKey Engineering Materials Vols. 651-653 (2015) pp 311-316; Trans Tech Publications, Switzerland | Datei |
    DOI: 10.4028/www.scientific.net/KEM.651-653.311
  • Bernd-Arno Behrens, Sonda Moakhar Bouguecha, Milan Vucetic, Anas Bouguecha, Mohammad Kazhai (2015): Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging FoldsKey Engineering Materials Vols. 651-653 (2015) pp 305-310; Trans Tech Publications, Switzerland
    DOI: 10.4028/www.scientific.net/KEM.651-653.305
  • Bluemel, S.; Staehr, R.; Jaeschke, P.; Suttmann, O; Overmeyer, L. (2015): Correlation of internal and surface temperatures during laser cutting of epoxy-based carbon fibre reinforced plasticsJournal of Reinforced Plastics and Composites, vol. 34, 8: pp. 662-671.
  • Bonnie H. Ferri; Aldo A. Ferri; Gundula B. Runge (2015): Frequency-Weighted Variable-Length Controllers Using Anytime Control StrategiesJ. Dyn. Sys., Meas., 2015, vol. 137, no. 8, (10 pages)
    DOI: 10.1115/1.4029797
  • Borchert, G.; Battistelli, M.; Runge, G.; Raatz, A. (2015): Analysis of the mass distribution of a functionally extended delta robot Robotics and Computer Integrated Manufacturingin: Journal of Robotics and Computer Integrated Manufacturing, 2015, Vol. 31, pp. 111-120 (10 pages)
    DOI: 10.1016/j.rcim.2014.08.003
  • Böß, V., Henning, S.: (2015): Prognose des Materialabtrags beim Schälwälzfräsen von Geradverzahnungenwt Werkstattstechnik online, Jahrgang 105 (2015), Heft 6, S. 371 - 376. | Datei |
  • Breidenstein, B., Denkena, B., Bergmann, B.: (2015): Laser preparation of cBN inserts and its effect on tool surface integrity and tool life DIAMANTE Applicazioni & Tecnologia, Vol. 80 (2015), S. 35 - 43. | Datei |
  • Breidenstein, B., Denkena, B., Vetter, J., Richter, B.: (2015): Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti–6Al–4VProduction Engineering Research and Development (WGP), Vol. 10, Issue 2, S. 147 – 155. | Datei |
    DOI: 10.1007/s11740-015-0650-7
  • Bruchwald, O.; Frackowiak, W.; Bucquet, T.; Huskic, A.; Reimche. W.; Maier, H. J. (2015): In-situ-Erfassung der Werkstoffumwandlung und Gefügeausbildung von Schmiedebauteilen im Abkühlpfad HTM Journal of Heat Treatment and Materials 70 (2015), S. 150-161
  • Busch, J.; Driehorst M.; Nyhuis, P. (2015): Aerodynamische Orientierung in der Zuführtechnik - Mathematische Darstellung und Simulation eines aerodynamischen Orientierungsprozesseswt Werkstatttechnik online Jahrgang 105 (1/2), S. 49-54
  • Busch, J.; Quirico, M.; Richter, L.; Schmidt, M.; Raatz, A. (2015): A genetic algorithm for a self-learning parameterization of an aerodynamic part feeding system for high-speed assemblyin: CIRP Annals - Manufacturing Technology, Elsevier B.V., 2015, Vol. 64 (1), ISSN 0007-8506
    DOI: 10.1016/j.cirp.2015.04.044
  • Busch, J.; Quirico, M.; Richter, L.; Schmidt, M.; Raatz, A.; Nyhuis, P. (2015): A genetic algorithm for a self-learning parameterization of an aerodynamic part feeding system for high-speed assemblyCIRP Annals - Manufacturing Technology 64 (1), pp. 25-28
    DOI: 10.1016/j.cirp.2015.04.044
  • Denkena, B., Böß, V., Nespor, D., Flöter, F., Rust, F.: (2015): Engine blade regeneration: a literature review on common technologies in terms of machiningInternational Journal of Advanced Manufacturing Technology, Vol. 81, Issue 5 (2015), S. 917 - 924. | Datei |
    DOI: 10.1007/s00170-015-7256-2
  • Denkena, B., Eckl, M., Lepper, T.: (2015): Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines International Journal of Automation Technology, Vol. 9, No. 4 (2015), S. 425 - 435. | Datei |
  • Denkena, B., Friederichs, J., Fuchs, J.: (2015): Design and analysis of a 2-DOF synchronous planar drive for machine toolsProduction Engineering Research and Development (WGP), Vol. 9, Issue 1 (2015), S. 125 - 132. | Datei |
    DOI: 10.1007/s11740-014-0582-7
  • Denkena, B., Grove, T., Behrens, L.: (2015): Wear Mechanisms in Grinding of PCBN Applied Mechanics and Materials, Vol. 806 (2015), S. 555 - 560. | Datei |
    DOI: 10.4028/www.scientific.net/AMM.806.555
  • Denkena, B., Grove, T., Behrens, L.: (2015): Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts Production Engineering Research and Development (WGP), Vol. 9, Issue 2 (2015), S. 187 - 193. | Datei |
    DOI: 10.1007/s11740-015-0599-6
  • Denkena, B., Grove, T., Dittrich, M. A., Beiler, C., Lahres, M.: (2015): Effects of alloying elements in UHC-steels and consequences for the machinability CIRP Journal of Manufacturing Science and Technology, Vol. 10 (2015), S. 102 - 109. | Datei |
    DOI: 10.1016/j.cirpj.2015.04.001
  • Denkena, B., Grove, T., Dittrich, M. A.: (2015): Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel Production Engineering Research and Development (WGP), Vol. 9, Issue 3, S. 337 - 342. | Datei |
    DOI: 10.1007/s11740-015-0627-6
  • Denkena, B., Grove, T., Göttsching, T.: (2015): Grinding with patterned grinding wheelsCIRP Journal of Manufacturing Science and Technology, Vol. 8 (2015), S. 12 – 21. | Datei |
    DOI: 10.1016/j.cirpj.2014.10.005
  • Denkena, B., Grove, T., Hasselberg, E.: (2015): Workpiece shape deviations in face milling of hybrid structures Materials Science Forum, Vol. 825 - 826 (2015), S. 336 - 343. | Datei |
    DOI: 10.4028/www.scientific.net/MSF.825-826.336
  • Denkena, B., Grove, T., Maiß, O.: (2015): Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings Production Engineering Research and Development (WGP), Vol. 9, Issue 3 (2015), S. 299 - 305. | Datei |
    DOI: 10.1007/s11740-015-0615-x
  • Denkena, B., Grove, T., Seiffert, F.: (2015): Chip root analyses in peripheral longitudinal up-grinding by means of a new quick-stop deviceInternational Journal of Abrasive Technology, Vol. 7, No. 1 (2015), S. 59 - 72. | Datei |
  • Denkena, B., Helmecke, P., Hülsemeyer, L.: (2015): Energy efficient machining of Ti–6Al–4VCIRP Annals - Manufacturing Technology, Vol. 64 (2015), S. 61 – 64. | Datei |
    DOI: 10.1016/j.cirp.2015.04.056
  • Denkena, B., Kiesner, J.: (2015): Strain gauge based sensing hydraulic fixturesMechatronics, Vol. 34 (2016), S. 111 – 118. | Datei |
    DOI: 10.1016/j.mechatronics.2015.05.008
  • Denkena, B., Köhler, J., Bergmann, B.: (2015): Development of cutting edge geometries for hard milling operationsCIRP Journal of Manufacturing Science and Technology, Vol. 8 (2015), S. 43 – 52. | Datei |
    DOI: 10.1016/j.cirpj.2014.10.002
  • Denkena, B., Litwinski, K., Boujnah, H.: (2015): Detection of tool deflection in milling by asensory axis slide for machine toolsMechatronics Vol. 34 (2016), S. 95 – 99. | Datei |
    DOI: 10.1016/j.mechatronics.2015.09.008
  • Denkena, B., Litwinski, K., Eckl, M.: (2015): Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine Tools Production Engineering Research and Development (WGP), Vol. 9, Issue 2 (2015), S. 257 - 267. | Datei |
    DOI: 10.1007/s11740-015-0600-4
  • Emde, B.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2015): Identification of the zinc dispersion in rubber blends by libs with a ND:YAG laserIn: Chinese Optics (4), S. 596–602.
    DOI: 10.3788/CO.20150804.0596
  • Engelhardt, M.; Behne, D.; Grittner, N.; Neumann, A.; Reimche, W.; Klose, C. (2015): Non-destructive Testing of Longitudinal and Charge Weld Seams in Extruded Aluminum and Magnesium ProfilesMaterials Today: Proceedings. Aluminium Two Thousand World Congress and International Conference on Extrusion and Benchmark ICEB | Datei |
    DOI: 10.1016/j.matpr.2015.10.037
  • Georgiadis, A., Denkena, B.: (2015): Simulationsbasierte PPS-Optimierung für Instandhaltungsunternehmenwt Werkstattstechnik online, Jahrgang 105 (2015), Heft 4, S. 215 - 219. | Datei |
  • Gladkov, Y.; Peshekhodov, I.; Vucetic, M.; Bouguecha, A.; Behrens, B.-A. (2015): Implementation of the Bai & Wierzbicki fracture criterion in QForm and its application for cold metal forming and deep drawing technologyMATEC Web of Conferences, Ausgabe 21-2015. S. 12009-p.1 - 12009-p.7
  • Grzesik, W., Denkena, B., Zak, K., Grove, T., Bergmann, B.: (2015): Correlation between friction and wear of CBN cutting tools in precision hard machining Journal of Manufacturing Science and Engineering, Vol. 137 (2015), 19 S. | Datei |
  • Hagemann, R.; Noelke, C.; Rau, T.; Kaierle, S.; Overmeyer, L.; Wesling, V.; Wolkers, W. (2015): Design, processing, and characterization of nickel titanium micro-actuators for medical implantsJ. Laser Appl. 27, S29203 Laser Institute of America (LIA).
    DOI: 10.2351/1.4906381
  • Hoff, C.; Otero, N.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2015): Konditionierung von Kupferwerkstoffoberflächen zur Stabilisierung des Dauerstrich-LasermikroschweißensIn: Metall 69, S. 439–442.
  • Hustedt, M.; Walter, J.; Kaierle, S.; Overmeyer, L.; Werner, J.; Baudrit, B. et al. (2015): Emissionen bei der Laserstrahlbearbeitung von KunststoffenIn: Joining Plastics - Fügen von Kunststoffen 9 (3-4), S. 195–203.
  • In'T Veld, B.H.; Overmeyer, L.; Schmidt, M.; Wegener, K.; Malshe, A.; Bartolo, P. (2015): Micro additive manufacturing using ultra short laser pulses CIRP Annals - Manufacturing Technology, Vol. 64, Issue 2, 2015, Pages 701-724. USA: Elsevier
    DOI: 10.1016/j.cirp.2015.05.007
  • Jaeschke, P.; Wippo, V.; Suttmann, O.; Overmeyer, L. (2015): Advanced laser welding of high-performance thermoplastic compositesJ. Laser Appl. 27, S29004, Laser Institute of America (LIA).
    DOI: 10.2351/1.4906379
  • Kuprat, T.; Mayer, J.; Nyhuis, P. (2015): Aufgaben der Produktionsplanung im Kontext von Industrie 4.0Industrie Management 31 (2), pp. 11-14
  • L. Jogschies, D. Klaas, R. Kruppe, J. Rittinger, P. Taptimthong, A. Wienecke, L. Rissing, M. C. Wurz (2015): Recent Developments of Magnetoresistive Sensors for Industrial ApplicationsSensors, 15(11), 28665-28689
  • Lübkemann, J.; Richter, L; Nyhuis, P. (2015): Model-based Reorganization of Factory StructuresJCC: The Business and Economics Research Journal, Volume 8 (1), pp. 69-74
    DOI: 10.7835/jcc-berj-2015-0107
  • Lucas, H., Denkena, B., Grove, T., Krebs, E., Kersting, P., Freiburg, D., Biermann, D.: (2015): Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling Journal of Heat Treatment and Materials, Vol. 70, No. 4 (2015), S. 183 - 189. | Datei |
    DOI: 10.3139/105.110265
  • Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner,S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B.-A. (2015): Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming processJournal: Production Engineering | Datei |
  • Meriem Akin, Sonda Moakhar Ep Bouguecha, Juergen Becker, Lutz Rissing (2015): Eutectic bonding of integrated circuits onto polycarbonate and poly(methyl methacrylate) by means of indium-tin and indium-bismuthIEEE Transactions on Components, Packaging and Manufacturing Technology
    DOI: 10.1109/TCPMT.2015.2420531
  • Meyer, G.; Brünig, B.; Nyhuis, P. (2015): Employee competences in manufacturing companies - an expert surveyJournal of Management Development Vol. 34 No. 8, pp. 1004-1018
  • Müller, A., Denkena, B.: (2015): Fine Grinding of Bioceramics for Knee Implants with Elastically Bonded Abrasives: Process Modeling and ValidationJournal of Ceramic Science and Technology, Vol. 6, No. 1 (2015), S. 31 - 40. | Datei |
    DOI: 10.4416/JCST2014-00024
  • Müller, T.; Schmidt, T.; Weigelt, S.; Overmeyer, L. (2015): Investigation and assessment of the electromechanical fatigue of electronic components of forklift trucks Applied Mechanics and Materials Vol. 706, pp 100-107 . Trans Tech Publications, Switzerland
    DOI: 10.4028/www.scientific.net/AMM.706.100
  • Nespor, D., Denkena, B., Grove, T., Böß, V.: (2015): Differences and similarities between the induced residual stresses after ball end milling and orthogonal cutting of Ti–6Al–4VJournal of Materials Processing Technology, Vol. 226 (2015), S. 15 - 24. | Datei |
    DOI: 10.1016/j.jmatprotec.2015.06.033
  • Nespor, D., Denkena, B., Grove, T., Pape, O.: (2015): Surface topography after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end millingInternational Journal of Advanced Manufacturing Technology, 11.11.2015, S. 1 - 18. | Datei |
    DOI: 10.1007/s00170-015-7885-5
  • Nyhuis, P.; Grigutsch, M.; Nywlt, J.; Nicolay, C. (2015): Die Simulation als Enabler für logistische Modelle. Entwicklung eines universellen Simulationstools zur umfassenden Validierung logistischer Modellewt Werkstattstechnik online Jahrgang 105 (4), S. 174-178
  • Nywlt, J.; Grigutsch, M. (2015): Big Data Analytics Based on Logistical ModelsJCC: The Business and Economics Research Journal 8 (1), pp. 57-62
    DOI: 10.7835/jcc-berj-2015-0105
  • Paschke, H.; Yilkiran, T.; Lippold, L.; Brunotte, K.; Weber, M.; Braeuer, G.; Behrens, B.-A. (2015): Adapted surface properties of hot forging tools using plasma technology for an effective wear reductionWear Vols. 330-331 (2015) pp 429-438; Elsevier | Datei |
    DOI: 10.1016/j.wear.2015.02.009
  • Puppa, J.; Behrens, B.-A. (2015): Optimization of Cooling and Lubrication for Nitrided and Ceramic-Coated Hot Forging DiesApplied Mechanics and Materials Vol. 794 (2015) pp. 97-104, Trans Tech Publications, Switzerland | Datei |
  • R. Krimm, B.-A. Behrens, D. Reich (2015): Hybridaktorischer Pressenantriebwt Werkstattstechnik online Jahrgang 105 (2015) H. 10, S. 747-752
  • Richter, L.; Johannes, C.; Bussemer, F.; Spengler, T. S.; Nyhuis, P. (2015): Wertschöpfungsnetzwerke in MetropolregionenWerkstattstechnik online 105 (3), S. 148-151
  • Rössig, C., Angrisani, N., Helmecke, P., Besdo, S., Seitz, J., Welke, B., Fedchenko, N., Kock, H., Reifenrath, J.: (2015): In vivo evaluation of a magnesium-based degradable intramedullary nailing system in a sheep modelActa Biomaterialia, Vol. 25 (2015), S. 369 – 383. | Datei |
    DOI: 10.1016/j.actbio.2015.07.025
  • Runge, G.; Borchert, G.; Henke, P.; Raatz, A. (2015): Design and Testing of a 2-DOF Ball Drivein: Journal of Intelligent & Robotic Systems, 2015 (19 pages)
    DOI: 10.1007/s10846-015-0247-6
  • Schirrmacher, S.; Ullmann, G.; Overmeyer, L (2015): Thermoelectric Power Supply of Wireless Sensor Nodes in Marine Gearboxes In: Energy Harvesting and Systems, Walter de Gruyter GmbH, Vol. 2 (2015), No. 1., pp. 81-93, ISSN: (Online) 2329-8766, ISSN (Print) 2329-8774.
    DOI: 10.1515/ehs-2014-0044
  • Schmidt, M.; Münzberg, B.; Nyhuis, P. (2015): Determining lot sizes in production areas – exact calculations versus research based estimationProcedia CIRP 28, pp. 143 – 148
  • Schneider, M.; Geffert, A.; Peshekhodov, I.; Bouguecha, A.; Behrens, B.-A. (2015): Overview and comparison of various test methods to determine formability of a sheet metal cut-edge and approaches to the test results application in forming analysisMaterialwissenschaft und Werkstofftechnik, 46 Ausgabe, S. 1196 - 1217
  • Schönemann, L., Sassi, N., Krüger, R., Bloem, A., Denkena, B., Kuhfuß, B.: (2015): Ultrapräzise Hochgeschwindigkeitsbearbeitungwt Werkstattstechnik online, Jahrgang 105 (2015), Heft 7/8, S. 469 - 474. | Datei |
  • Schuh, G.; Nyhuis, P.; Reuter, C.; Hauptvogel, A.; Schmitz, S.; Nywlt, J.; Brambring, F.; Schulte, F.; Hansen, J. (2015): Produktionsdaten als Enabler für Industrie 4.0. Gemeinsame Studie der produktionstechnischen Institute IFA, IPMT, Fraunhofer IWU und WZLwt Werkstattstechnik online Jahrgang 105 (4), S. 200-203
  • Seitz, K.-F.; Nyhuis, P. (2015): Cyber-Physical Production Systems Combined with Logistic Models – A Learning Factory Concept for an Improved Production Planning and ControlProcedia CIRP 32 (2015) pp. 92-97
  • Staehr, R.; Bluemel, S.; Hansen, P.; Jaeschke, P.; Suttmann, O; Overmeyer, L. (2015): The influence of moisture content on the heat affected zone and the resulting in-plane shear strength of laser cut thermoplastic CFRP Plastics and Composites, vol. 44, 3: pp. 111-116
    DOI: 10.1179/1743289814Y.0000000114
  • T. Geipel, L. C. Rendler, M. Stompe, U.h Eitner, L. Rissing (2015): Reduction of Thermomechanical Stress Using Electrically Conductive AdhesivesEnergy Procedia, Volume 77, August 2015, Pages 346-355, ISSN 1876-6102
    DOI: 10.1016/j.egypro.2015.07.049
  • Tschöpe, S.; Koltze, C.; Nyhuis, P. (2015): Fabrikplanungsspezifische Modellierungssprache - Prozessmodellierungssprache zur systematischen Grundlagenermittlung in der Fabrikplanungwt Werkstattstechnik online 105 (4), S. 179-183
  • Uttendorf, S.; Overmeyer, L (2015): Fuzzybasierte Auslegung von Wegenetzen für fahrerlose TransportsystemeProceedings 25. Workshop Computational Intelligence, Dortmund, 26.-27. November 2015. S. 105-119, KIT Scientific Publishing
    DOI: 10.5445/KSP/1000049620
    ISBN: 978-3-7315-0432-0
  • Ventura, C. E. H., Köhler, J., Denkena, B.: (2015): Influence of cutting edge geometry on tool wear performance in interrupted hard turning Journal of Manufacturing Processes, Vol. 19 (2015), S. 129 – 134. | Datei |
    DOI: 10.1016/j.jmapro.2015.06.010
  • Von Witzendorff, P. ; Kaierle, S.; Suttmann, O.; Overmeyer, L. (2015): Using pulse shaping to control temporal strain development and solidification cracking in pulsed laser welding of 6082 aluminum alloysJournal of Materials Processing Technology, vol. 225, p. 162-169.
    DOI: 10.1016/j.jmatprotec.2015.06.007
  • von Witzendorff, P.; Hermsdorf, J.; Kaierle, S.; Suttmann, O.; Overmeyer, L. (2015): Double pulse laser welding of 6082 aluminium alloys Science and Technology of Welding and Joining Volume 20, Issue 1, 1 January 2015, Pages 42-47, Maney Publishing
    DOI: 10.1179/1362171814Y.0000000255
  • von Witzendorff, P.; Kaierle, S.; Suttmann, O.; Overmeyer, L. (2015): In Situ Observation of Solidification Conditions in Pulsed Laser Welding of AL6082 Aluminum Alloys to Evaluate Their Impact on Hot Cracking Susceptibility Metallurgical and Materials Transactions A April 2015, Volume 46, Issue 4, pp 1678-1688, Springer Boston
    DOI: 10.1007/s11661-015-2749-z
  • Winkens, M.; Schmidt, M.; Nyhuis, P. (2015): Zustandsorientierte Instandhaltung - Potentiale bei der Lebensdauerprognose von Bauteilen im Sonderforschungsbereich 653Werkstatttechnik online 105 (3), S. 104-108
  • Wolff, J.; Borchert, G.; Raatz, A. (2015): Demontage bei verfestigten VerbindungenWerkstattstechnik online 09/15, S. 604-609
  • Wolters, L., Besdo, S., Angrisani, N., Wriggers, P., Hering, B., Seitz, J., Reifenrath, J.: (2015): Degradation behaviour of LAE442-based plate–screw-systems in an in vitro bone modelMaterials Science and Engineering, Vol. 49 (2015), S. 305 - 315. | Datei |
    DOI: 10.1016/j.msec.2015.01.019
  • Y.A. Galdkov, I.A. Peshekhodov, M. Vucetic, A. Bouguecha, B.-A. Behrens (2015): Realisation of Bai-Wierzbicki damage criterion in QForm for modelling cold forming processes on an example of deep drawing of a high-strength steel (in Russian)Kuznecho-Shtampovochnoe Proizvodstvo 1 (2015) S. 33-38 | Datei |
  • Abrao, A. M., Denkena, B., Breidenstein, B., Mörke, T.: (2014): Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel Production Engineering Research and Development (WGP), Vol. 8, Issue 5, (2014), S. 551 - 558. | Datei |
    DOI: 10.1007/s11740-014-0539-x
  • Abrao, A.M., Denkena, B., Köhler, J., Breidenstein, B., Mörke, T., Rodrigues, P.C.M.: (2014): The influence of heat treatment and deep rolling on the mechanical properties and integrity of AISI 1060 steelJournal of Materials Processing Technology, Vol. 214, Issue 12, (2014), S. 3020 - 3030. | Datei |
    DOI: 10.1016/j.jmatprotec.2014.07.013
  • Abrao, A.M., Denkena, B., Köhler, J., Breidenstein, B., Mörke, T.: (2014): The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel2nd CIRP Conference on Surface Integrity (CSI), Procedia CIRP 13 (2014), S. 31 – 36. | Datei |
    DOI: 10.1016/j.procir.2014.04.006
  • Ahmad Al-Qudsi, Matthias Kammler, Anas Bouguecha, Christian Bonk, Bernd-Arno Behrens (2014): Comparison between different numerical models of densification during solid-state sintering of pure aluminium powderProduction Engineering, August 2014, Springer Berlin Heidelberg | Datei |
    DOI: 10.1007/s11740-014-0574-7
  • Altintas, Y., Kersting, P., Biermann, D., Budak, E., Denkena, B., Lazoglu, I.: (2014): Virtual process systems for part machining operationsCIRP Annals-Manufacturing Technology, 63 (2014), S. 585-605. | Datei |
  • Becker, J.; Grigutsch, M.; Nyhuis, P. (2014): Dynamic and Future-Oriented Dimensioning Of Stockin: Md. Bhuiyan, M. H. (ed.): Proceedings of World Business and Economics Research Conference, 24-25 February, Auckland, New Zealand
    ISBN: 978-1-922069-45-0
  • Behrens, B.-A.; Bouguecha, A.; Jeske, M.; Moritz, J.; Vucetic, M.; Matthias, T. (2014): Numerische Berechnung einer integrierten Wärmebehandlung für das Gleitziehbiegen von Profilen und die experimentelle UmsetzungHTM Journal of Heat Treatment and Materials Dezember 2014, Jg. 69, Ausgabe 6. Seiten: 339–347
  • Behrens, B.-A.; Frischkorn, C. (2014): Induktive Erwärmung von partikelverstärkten Stahlpresslingen in den thixotropen TemperaturbereichMaterialwissenschaft und Werkstofftechnik, Volume 45, Issue 3, S. 177–186 | Datei |
  • Behrens, B.-A.; Frischkorn, C. (2014): Thixoforging of particle-reinforced steel materialsProduction Engineering | Datei |
    DOI: 10.1007/s11740-014-0533-3
  • Behrens, B.-A.; Frischkorn, C.; Bonhage, M. (2014): Reprocessing of AW2007, AW6082 and AW7075 aluminium chips by using sintering and forging operations Production Engineering | Datei |
    DOI: 10.1007/s11740-014-0542-2
  • Behrens, B.-A.; Kazhai, M. (2014): Numerical and Experimental Investigations on Fold Formation in Forged PartsKey Engineering Materials Vols. 611-612 (2014) pp 212-220; Trans Tech Publications, Switzerland | Datei |
    DOI: 10.4028/www.scientific.net/KEM.611-612.212
  • Behrens, B.-A.; Kazhai, M.; Prüß, T (2014): Potentials of Ceramic Die Materials for Isothermal Forging Purposes of a Titanium AlloyKey Engineering Materials Vols. 611-612 (2014) pp 202-211 | Datei |
    DOI: 10.4028/www.scientific.net/KEM.611-612.202
  • Behrens, B.-A.; Krimm, R.; Gröne, M. (2014): Stößelversatz mit neuartigem System vermeidenwt Werkstattstechnik online Jahrgang 104 (2014), Springer-VDI-Verlag GmbH & Co. KG, Düsseldorf | Datei |
  • Behrens, B.-A.; Nyhuis, P.; Overmeyer, L.; Bentlage, A.; Rüther, T.; Ullmann, G (2014): Towards a definition of large scale productsIn: Production Engineering, Springer Verlag, 8. Jg. (2014), H. 1-2 , S. 153-164
  • Behrens, B.-A.; Puppa, J.; Menze, J. (2014): Abkühlverhalten nitrierter und keramisch beschichteter Schmiedewerkzeugewt Werkstattstechnik online, Jahrgang 104 (2014) Ausgabe 10, S.686-690, Springer-VDI-Verlag, Düsseldorf | Datei |
  • Behrens, B.-A.; Yilkiran, T.; Ocylok, S.; Weisheit, A.; Kelbassa, I. (2014): Deposition welding of hot forging dies using nanoparticle reinforced weld materialProduction Engineering – Research and Development, German Academic Society for Production Engineering (WGP), 2014 | Datei |
    DOI: 10.1007/s11740-014-0562-y
  • Behrens,B.-A.; Denkena, B.; Park, H.-S.; Henjes, J.; Kröning, S.; Yilkiran, T.; Klassen, A. (2014): Application of methods for ecological optimization of crank shaft forging process, Production Engineering – Research and DevelopmentGerman Academic Society for Production Engineering (WGP), Heft 8, S. 253-261 | Datei |
  • Bertsch, S.; Schmidt, M.; Nyhuis, P. (2014): Modeling of lateness distributions depending on the sequencing method with respect to productivity effectsCIRP Annals - Manufacturing Technology 63 (1), pp. 429–432
  • Blümel, S.; Jäschke, P.; Suttmann, O.; Overmeyer, L. (2014): Comparative Study of Achievable Quality Cutting Carbon Fibre Reinforced Thermoplastics Using Continuous Wave and Pulsed Laser SourcesPhysics Procedia - LANE 2014 (56), 1143–1152
    DOI: 10.1016/j.phpro.2014.08.029
  • Böß, V., Niederwestberg, D., Ammermann, Ch., Denkena, B.: (2014): Cutting edge orthogonal contact-zone analysis using detailed tool shape representationThe International Journal of Advanced Manufacturing Technology, 2014, S. 1-10. | Datei |
    DOI: 10.1007/s00170-014-6230-8
  • Bouzakis. K.D., Bouzakis, E., Kombogiannis, S., Makrimallakis, S., Skordaris, G., Michailidis, N., Charalampous, P., Paraskevopoulou, R., M'Saoubi, R., Aurich, J.C., Barthelmä, F., Biermann, D., Denkena, B., Dimitrov, D., Engin, S., Karpuschewski, B., Klocke, F., Özel, T., Poulachon, G., Rech, J., Schulze, V., Settineri, L., Srivastava, A., Wegener, K., Uhlmann, E., Zeman, P.: (2014): Effect of cutting edge preparation of coated tools on their performancev in milling various materialsCIRP Journal of Manufacturing Science and Technology 7/2014, S. 264–273. | Datei |
    DOI: 10.1016/j.cirpj.2014.05.003
  • Braeuer, G.; Paschke, H.; Weber, M.; Behrens, B.-A.; Yilkiran, T. (2014): Surface modifications for optimized forming operations. Key Engineering Materials, Vols. 611-612 (2014), pp 231-239 | Datei |
    DOI: 10.4028/www.scientific.net/KEM.611-612.231
  • Breidenstein B., Gey, Ch., Denkena, B.: (2014): Residual Stress Development in Laser Machined PVD-Coated Carbide Cutting ToolsMaterials Science Forum 768-769 (2014) S. 391 - 397. | Datei |
    DOI: 10.4028/www.scientific.net/MSF.768-769.391
  • Breidenstein, B., Bergmann, B., Denkena, B., Köhler, J.: (2014): Influence of Laser Ablation on Wear Behavior of cBN Cutting InsertsDiamante A & T, Issue 78, Year XX, September 2014, S. 67-74. | Datei |
  • D. Dinulovic, M. Kaiser, A. Gerfer, O. Opitz, M.C. Wurz, L. Rissing (2014): Microtransformer with Closed Fe-Co Magnetic Core for High Frequency Power ApplicationsJournal of Applied Physics 115, 17A317
    DOI: 10.1063/1.4863930
  • D. Dinulovic, M. Kaiser, A. Gerfer, O. Opitz, M.C. Wurz, L. Rissing (2014): Thin-film Microtransformer for High Frequency Power ApplicationsAIP Journal of Applied Physics 115, 17A317
    DOI: 10.1063/1.4863930
  • Denkena, B. ; Overmeyer, L. ; Litwinski, K. M. ; Peters, R. (2014): Compensation of geometrical deviations via model based-observersInternational Journal of Advanced Manufacturing Technology (Int J Adv Manuf Technol). London: Springer-Verlag
    DOI: 10.1007/s00170-014-5885-5
  • Denkena, B., Behrens, B.-A., Dannenberg, M., Georgiadis, A.: (2014): Optimierung alternativer Schmiedeprozesskettenwt Werkstatttechnik online, Jahrgang 104 (2014), Heft 10, S. 691 - 695. | Datei |
  • Denkena, B., Bickel, W., Grabowski, R.: (2014): Modeling and simulation of milling processes including process damping effectsGerman Academic Society for Production Engineering (WGP) 2014, Published online: 13. April 2014, S. 453 - 459. | Datei |
    DOI: 10.1007/s11740-014-0544-0
  • Denkena, B., Biermann, D.: (2014): Cutting edge geometriesCIRP Annals-Manufacturing Technology, 63 (2014), S. 631-653. | Datei |
    DOI: 10.1016/j.cirp.2014.05.009
  • Denkena, B., Böß, V., Fleischer, B., Uhlich, F.: (2014): Zeitkritische Fertigung individueller Implantate* - Operationsparallele Formbestimmung und Fertigung von Kniescheibenimplantatenwt Werkstattstechnik online, Jahrgang 104 (2014) H. 9, S. 592 - 596. | Datei |
  • Denkena, B., Dengler, B., Doreth, K., Krull, C., Horton, G.: (2014): Interpretation and optimization of material flow via System behavior reconstructionGerman Academic Society for Production Engineering (WGP), Vol. 8, Issue 5, (2014), S. 659 - 668. | Datei |
    DOI: 10.1007/s11740-014-0545-z
  • Denkena, B., Grove, T., Göttsching, T., da Silva, E.J., Coelho, R.T., Filleti, R.: (2014): Enhanced grinding performance by means of patterned grinding wheelsThe International Journal of Advanced Manufacturing Technology, Springer Verlag, Vol. 77, Issue 9 - 12 (2014), S. 1935 - 1941. | Datei |
    DOI: 10.1007/s00170-014-6579-8
  • Denkena, B., Grove, T., Krawczyk, T., Harmes, J.: (2014): Mit geschliffenen Riblets zur effizienteren Pumpe - Schleifstrategien zur Mikrostrukturierung von Pumpenlaufrädern wt Werkstattstechnik online, Jahrgang 104, H 11/12, 2014, S. 716 - 721. | Datei |
  • Denkena, B., Grove, T., Lucas, H.: (2014): Interaction of load and residual stresses in sintered 1.3344 high speed steelAdvanced Materials Research Vol. 1018 (2014), S. 145 - 152. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.1018.145
  • Denkena, B., Gümmer, O., Flöter, F.: (2014): Evaluation of electromagnetic guides in machine toolsCIRP Annals - Manufacturing Technology 63, 2014, S. 357 – 360. | Datei |
    DOI: 10.1016/j.cirp.2014.03.130
  • Denkena, B., Köhler, J., Breidenstein, B., Abrao, A.M., Ventura, C.E.H.: (2014): Influence of the cutting edge preparation method on characteristics and performance of PVD coated carbide inserts in hard turningSurface & Coatings Technology 254 (2014), S. 447–454. | Datei |
    DOI: 10.1016/j.surfcoat.2014.07.003
  • Denkena, B., Köhler, J., Dittrich, M. A.: (2014): Chip formation and tool wear in turning of aluminum-alloyed UHC-steelsProduction Engineering Research and Development (WGP), August 2014, Volume 8, Issue 4, S. 415-421. | Datei |
    DOI: 10.1007/s11740-013-0525-8
  • Denkena, B., Köhler, J., Krawczyk, T.: (2014): Grinding of Riblet Structures on Free Formed Compressor BladesAdvanced Materials Research Vol. 907 (2014), S. 463-473. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.907.463
  • Denkena, B., Köhler, J., Schindler, A., Woiwode, S.: (2014): Kinematic analysis of the cutting speed for continuous generating grindingProduction Engineering (WGP), Vol. 9, Issue 1, (2014), S. 35 - 40. | Datei |
    DOI: 10.1007/s11740-014-0578-3
  • Denkena, B., Köhler, J., Schindler, A., Woiwode, S.: (2014): Continuous generating grinding — Material engagement in gear tooth root machiningMechanism and Machine Theory 81 (2014), S. 11-20. | Datei |
    DOI: 10.1016/j.mechmachtheory.2014.06.008
  • Denkena, B., Köhler, J., Schindler, A.: (2014): Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end millsProduction Engineering (WGP), Vol. 8, Issue 5 (2014), S. 627 - 633. | Datei |
    DOI: 10.1007/s11740-014-0569-4
  • Denkena, B., Köhler, J., Tatzig, L.: (2014): Schleifen konkaver Bauteile aus Biokeramik - Einsatzverhalten unterschiedlicher Bindungssysteme für torische Schleifstiftewt Werkstattstechnik online 6-2014, S. 382-387. | Datei |
  • Denkena, B., Köhler, J., Ventura, C.E.H.: (2014): Strategies for grinding of chamfers in cutting insertsPrecision Engineering 38 (2014), S. 749–758. | Datei |
    DOI: 10.1016/j.precisioneng.2014.04.002
  • Denkena, B., Köhler, J., Wippermann, A., Schmidtke, M.: (2014): Flexibles Polierwerkzeug zur konturtreuen Bearbeitung dentaler Werkstoffe, Bearbeitung von Kobalt-Chrom LegierungenFlexibles Polierwerkzeug zur konturtreuen Bearbeitung dentaler Werkstoffe, Quintessenz Zahntechnik 2014 Vol. 40 Ausgabe 7, S. 876-885. | Datei |
  • Denkena, B., Köhler, J., Woiwode, S.: (2014): Dressing of vitrified bonded CBN tools for continuous generating grindingProduction Engineering Research and Development (WGP), Vol. 8, Issue 5 (2014), S. 585 - 591. | Datei |
    DOI: 10.1007/s11740-014-0541-3
  • Denkena, B., Krüger, M., Schmidt, J.: (2014): Condition-based tool management for small batch productionThe International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, S. 471-480. | Datei |
    DOI: 10.1007/s00170-014-6013-2
  • Denkena, B., Nespor, D., Böß, V., Köhler, J.: (2014): Residual stresses formation after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling CIRP Journal of Manufacturing Science and Technology, Vol. 7, Issue 4 (2014), S. 347 - 360. | Datei |
    DOI: 10.1016/j.cirpj.2014.07.001
  • Denkena, B., Ortmaier, T., Ahrens, M., Fischer, R.: (2014): Monitoring of grinding wheel defects using recursive estimationThe International Journal of Advanced Manufacturing Technology (2014) 75, S. 1005–1015. | Datei |
    DOI: 10.1007/s00170-014-6170-3
  • Denkena, B., Overmeyer, L., Litwinski, K., Peters, R.: (2014): Compensation of geometrical deviations via model based-observersThe International Journal of Advanced Manufacturing Technology, Volume 73, Numbers 5-8, 2014, S. 989-998. | Datei |
    DOI: 10.1007/s00170-014-5885-5
  • Denkena, B., Preising, D., Woiwode, S.: (2014): Gear profile grinding with metal bonded CBN Tools Production Engineering Research and Development (WGP), Vol. 9, Issue 1 (2014),S. 73 - 77. | Datei |
    DOI: 10.1007/s11740-014-0588-1
  • Denkena, B., Schmidt, J., Krüger, M.: (2014): Data mining approach for knowledge-based process planningProcedia Technology 15 (2014), S. 406-415. | Datei |
    DOI: 10.1016/j.protcy.2014.09.095
  • Denkena, B., Stiffel, J.-H., Hasselberg, E., Breidenstein, B.: (2014): Chip formation in monocrystalline iron-aluminumCIRP Journal of Manufacturing Science and Technology, 7 (2014), S. 71–82. | Datei |
    DOI: 10.1016/j.cirpj.2014.01.004
  • Denkena, B., Stiffel, J.-H., Hasselberg, E., Nespor, D.: (2014): Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminumProduction Engineering Research and Development (WGP), Vol. 8, Issue 3 (2014), S. 273 - 282. | Datei |
    DOI: 10.1007/s11740-013-0520-0
  • Denkena, B., Vehmeyer, J., Niederwestberg, D., Maaß, P.: (2014): Identification of the specific cutting force for geometrically defined cutting edges and varying cutting conditionsInternational Journal of Machine Tools & Manufacture, 82-83 (2014), S. 42–49. | Datei |
    DOI: 10.1016/j.ijmachtools.2014.03.009
  • Denkena, B.; Behrens, B.-A.; Dannenberg, M.; Georgiadis, A. (2014): Optimierung alternativer Schmiedeprozesskettenwt Werkstattstechnik online, Jg. 104 (2014), H. 10, S. 691-695, Springer-VDI-Verlag, Düsseldorf | Datei |
  • Denkena, B.; Mörke, T.; Krüger, M.; Schmidt, J.; Boujnah, H.; Meyer, J.; Gottwald, P.; Spitschan, B.; Winkens, M. (2014): Development and first applications of gentelligent components over their lifecycleCIRP Journal of Manufacturing Science and Technology 7 (2), pp. 139–150 Weitere Informationen
    DOI: 10.1016/j.cirpj.2013.12.006
  • Denkena, B.; Mörke, T.; Krüger, M.; Schmidt, J.; Boujnah, H.; Meyer, J.; Gottwald, P.; Spitschan, B.; Winkens, M.: (2014): Development and first applications of gentelligent components over their lifecycleCIRP Journal of Manufacturing Science and Technology, 7 (2014), S. 139-150. | Datei |
    DOI: 10.1016/j.cirpj.2013.12.006
  • Emde, B.; Huse, M.; Hermsdorf, J.; Kaierle, S.; Wesling, V.; Overmeyer, L. (2014): Influence of Welding Current and Focal Position on the Resonant Absorption of Laser Radiation in a TIG Welding ArcPhysics Procedia - LANE 2014 (56), 646–652
  • Ezechieli, M., Ettinger, M., König, C., Weizbauer, A., Helmecke, P., Schavan, R., Lucas, A., Windhagen, H., Becher, C., (2014): Biomechanical characteristics of bioabsorbable magnesium‑based (MgYREZr‑alloy) interference screws with different threadsKnee Surgery, Sports Traumatology, Arthroscopy, | Datei |
    DOI: 10.1007/s00167-014-3325-6
  • Fischer, M.; Dickert, H. H.; Bleck, W.; Huskic, A.; Kazhai, M.; Hadifi, T.; Bouguecha, A.; Behrens, B.-A.; Labanova, N.; Felde, A.; Liewald, M.; Egorov, F.; Garbrecht, M.; Brinksmeier, E.; Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J.; Bucquet, T.; Hinrichs, B.; Fritsching, U.; Hoja, T.; Hoffmann, F.; Zoch, H.-W. (2014): EcoForge: Energieeffiziente Prozesskette zur Herstellung von Hochleistungs-SchmiedebauteilenHTM Journal of Heat Treatment and Materials, August 2014, Band 69, Nr. 4, S.209-219 | Datei |
  • Grigutsch, M.; Becker J.; Nyhuis, P. (2014): Universal Logistic Information System Evaluating Logistical Measures within the Supply Chainin: Md. Bhuiyan, M. H. (ed.): in: Md. Bhuiyan, M. H. (ed.): Proceedings of World Business and Economics Research Conference, 24-25 February, Auckland, New Zealand
    ISBN: 978-1-922069-45-0
  • Grigutsch, M.; Nywlt, J.; Ludwig, J.-P.; Nyhuis, P. (2014): Verborgenes Potential Mehrfachverwendung - Ansatz zur Beschreibung der Bedarfsglättung durch den Kundenauftragsentkopplungspunktwt Werkstattstechnik online 104 (4), S. 238–243
  • Grove, T., Köhler, J., Denkena, B.: (2014): Residual Stresses in Milled Beta-Annealed Ti6Al4VProcedia CIRP, Vol. 13 (2014), S. 320 - 326. | Datei |
  • Herrmann, C.; Raatz, A.; Andrew, S.; Schmitt, J. (2014): Scenario-based Development of Disassembly Systems for Automotive Lithium Ion Battery Systemsin: Advances in Science and Technology, Trans Tech Publications, Switzerland, 2014, Vol. 907, pp. 391-401
    ISBN: 978-3-03835-053-8
  • Kellenbrink, C.; Herde, F.; Eickemeyer S.C.; Kuprat, T.; Nyhuis, P. (2014): Planning the Regeneration Processes of Complex Capital GoodsProcedia CIRP 24 (2014), pp. 140-145
    ISBN: ISSN: 2212-8271
  • Klassen, A.; Bouguecha, A.; Behrens, B.-A. (2014): Wear Prediction for Hot Forging Dies under Consideration of Structure Modification in the Surface LayerAdvanced Materials Research, Vol 1018, pp. 341-348, Sep. 2014
  • Lahdo, R.; Seffer, O.; Springer, A.; Kaierle, S.; Overmeyer, L. (2014): GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive PreheatingPhysics Procedia - LANE 2014 (56), 637–645
    DOI: 10.1016/j.phpro.2014.08.060
  • Majid Ansari, S.; Wulf, S.; Nyhuis, P. (2014): Verbesserung der Ressourceneffizienz - Möglichkeiten zur Gestaltung höherer Ressourceneffizienz in ProduktionsbetriebenWerkstattstechnik online 104 (5), S. 320-324
  • Majid Ansari, S.; Wulf, S; Görke, M. (2014): Resource Efficiency within Current ProductionJournal of Social, Management, Economics and Business Engineering 8 (11), pp. 3147-3151
  • Mersmann, T.: Nyhuis, P. (2014): Evaluation of Sustainability in a FactoryGlobal Journal of Engineering Science and Research Management, 1 (8), S. 56 - 65
  • Mersmann, T.; Nyhuis, P. (2014): Method to Evaluate Sustainability of a FactoryInternational Journal of Art & Humanity Science 1 (2), S. 87-92
  • Mersmann, T.; Nyhuis, P. (2014): Concept for Planning Sustainable FactoriesInternational Journal of Social, Management, Economics and Business Engineering 8 (5), pp. 1432-1436
  • Meyer, G.; Majid Ansari, S.; Nyhuis, P. (2014): Synergieeffekte von Methoden besser nutzen - Ansatz zur prozessverbessernden und kompetenzsteigernden Methodenauswahl in produzierenden KMUWerkstattstechnik online 104 (4), S. 212-216
  • Niederwestberg, D., Denkena, B.: (2014): Simulation of thermal and mechanical workpiece loadCIRP Journal of Manufacturing Science and Technology 7 (2014), S. 315–323. | Datei |
  • Overmeyer, L. ; Wang, Y. ; Wolfer, T. (2014): Eutectic BondingCIRP Encyclopedia of Production Engineering. Berlin: Springer, S. 488-492 - ISBN 978-3-642-20616-0
    DOI: 10.1007/978-3-642-20617-7_6483
  • P. von Witzendorff, M. Stompe, A. Moalem, S. Cvetkovic, U. Stute, L. Overmeyer, L. Rissing (2014): Dicing of Hard and Brittle Materials with On-Machine Laser-Dressed Metal-Bonded Diamond BladesPrecision Engineering Journal, Vol. 38, Issue 1, pp. 162–167
    DOI: 10.1016/j.precisioneng.2013.08.007
  • Rippel, M.; Lübkemann, J.; Nyhuis, P.; Schönsleben, P. (2014): Profiling as a means of implementing volume-oriented changeability in the context of strategic production managementCIRP Annals - Manufacturing Technology 63 (1), pp. 445–448
    DOI: 10.1016/j.cirp.2014.03.118
  • Roessig, C., Angrisani, N., Besdo, S., Damm, N., Badenhop, M., Fedchenko, N., Helmecke, P., Seitz, J., Meyer-Lindenberg, A., Reifenrath, J.: (2014): Magnesium-Based Intramedullary Nailing System in a Sheep Model: Biomechanic Evaluation and First In Vivo ResultsJournal of Veterinary Science & Medical Diagnosis, Vol. 3, Issue 3 (2014), 12 S. | Datei |
    DOI: 2325-9590.1000150
  • Schmidt, M.; Bertsch, S.; Nyhuis, P. (2014): Schedule compliance operating curves and their application in designing the supply chain of a metal producerProduction Planning & Control: The Management of Operations 25 (2), pp. 123-133
    DOI: 10.1080/09537287.2013.782947
  • Schmitt, J.; Raatz, A. (2014): Failure Mode Based Design and Optimization of the Electrode Packaging Process for Large Scale Battery Cellsin: Advances in Science and Technology, Trans Tech Publications, Switzerland, 2014, Vol. 907, pp. 309-319
    ISBN: 978-3-03835-053-8
  • Schmitt, J.; Raatz, A.; Dietrich, F. Dröder, K.; Hesselbach, J. (2014): Process and performance optimization by selective assembly of battery electrodesin: CIRP Annals - Manufacturing Technology, Elsevier B.V., 2014, Vol. 63/1, pp. 9-12
    DOI: http://dx.doi.org/10.1016/j.cirp.2014.03.018
    ISBN: ISSN 0007-8506
  • Schütz, V.; Sittinger, V.; Götzendörfer, S.; Kalmbach, C.; Fu, R; von Witzendorff, P.; Britze, C.; Suttmann, O.; Overmeyer, L. (2014): NIR-CW-Laser Annealing of Room Temperature Sputtered ZnO:AlPhysics Procedia - LANE 2014 (56), 1073–1082
    DOI: 10.1016/j.phpro.2014.08.020
  • Teichrib, S.; Krimm, R.; Behrens, B.-A. (2014): Electromagnetic Sheet Metal FeederKey Engineering Materials, Vols. 611-612 (2014), pp 939-946, Trans Tech Publications, Switzerland | Datei |
  • Varahram, A., Breidenstein, B., Hassel, T., Bach, F.-W., Maier, H. J.: (2014): New design and construction of expandable casing tubesForschung im Ingenieurwesen, Springer Verlag (2014) 78, S. 145 – 149. | Datei |
    DOI: 10.1007/s10010-014-0180-z
  • Ventura, C., Köhler, J., Denkena, B.: (2014): Strategies for grinding of chamfers in cutting insertsPrecision Engineering, Vol. 38, Issue 4 (2014), S. 749 - 758. | Datei |
    DOI: 10.1016/j.precisioneng.2014.04.002
  • von Witzendorff, P.; Moalem, A.; Stute, U.; Overmeyer, L. (2014): Performance enhancement of aluminum infrared laser welding by preconditioning with nanosecond laser pulsesJ. Laser Appl. 1 (26), 012005
    DOI: 10.2351/1.4828756
  • von Witzendorff, P.; Stompe, M.; Moalem, A.; Cvetkovic, S.; Suttmann, O. Overmeyer, L.; Rissing, L. (2014): Dicing of hard and brittle materials with on-machine laser-dressed metal-bonded diamond bladesPrecision Engineering 1 (38), 162–167
    DOI: 10.1016/j.precisioneng.2013.08.007
  • Walter, J.; Hustedt, M.; Stähr, R.; Kaierle, S.; Jäschke, P.; Suttmann, O.; Overmeyer, L.; (2014): Laser cutting of carbon fiber reinforced plastics – investigation of hazardous process emissionsPhysics Procedia - LANE 2014 (56), 1153–1164
    DOI: 10.1016/j.phpro.2014.08.030
  • Wegener, K.; Blumenthal, P.; Raatz, A. (2014): Development of a miniaturized clamping device driven by magnetic shape memory alloysin: Journal of Intelligent Material Systems and Structures, SAGE, 2014, Vol. 25 (9), pp. 1062-1068 Weitere Informationen
    ISBN: 10.1177/1045389X13505784
  • Ahrens, M., Fischer, R., Dagen, M., Denkena, B., Ortmaier, T.: (2013): Abrasion Monitoring and Automatic Chatter Detection in Cylindrical Plunge Grinding14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 ( 2013 ), S. 374 – 378. | Datei |
    DOI: 10.1016/j.procir.2013.06.119
  • Azab, A.; ElMaraghy, H.; Nyhuis, P.; Pachow-Frauenhofer, J.; Schmidt, M. (2013): Mechanics of change: A framework to reconfigure manufacturing systemsCIRP Journal of Manufacturing Science and Technology 6 (2), pp. 110-119
    DOI: 10.1016/j.cirpj.2012.12.002
  • B.-A. Behrens ,A. Bouguecha ,J. Rosenberger ,T. Matthias (2013): Numerical analysis of draw bending of load-adapted sheet metal profilesProduction Engineering – Research and Development; Springer Verlag, 2013 | Datei |
    DOI: 10.1007/s11740-013-0491-1
  • B.-A. Behrens, A. Bouguecha, M. Vucetic, I. Peshekhodov (2013): An experimental-numerical method to characterize formability of sheet metals in a wide range of stress states with the help of a tensile-shear test on new butterfly specimensHumanities and Science University Journal 5 (2013) S. 101-110 | Datei |
  • Bartelt, C., Böß, V., Brüning J., Denkena, B., Rausch, A., Tatou, J. P.: (2013): A Software Architecture to Synchronize Interactivity of Concurrent Simulations in Systems EngineeringIn Proceedings of the 20th ISPE International Conference on Concurrent Engineering, 2013, 10 S. | Datei |
  • Behrens, B.-A., Denkena, B., Park, H.-S., Henjes, J., Kröning, S., Yilkiran, T., Klassen, A.: (2013): Application of methods for ecological optimization of crank shaft forging processProduction Engineering Research and Development (WGP), 2013, 9 S. | Datei |
    DOI: DOI 10.1007/s11740-013-0517-8
  • Behrens, B.-A.; Bouguecha, A.; Huinink, T.; Peshekhodov, I.; Matthias, T.; Moritz, J.; Schrödter J. (2013): Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und ZugversuchenMaterialwissenschaft und Werkstofftechnik, Volume 44, Issue 9, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 760–767 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov I. (2013): An experimental-numerical method to characterise formability of sheet metals in a wide range of stress states with the help of a tensile-shear test on new butterfly specimensHumanities and Science University Journal of the St. Petersburg University Consortium, 5. Ausgabe, p. 101-110
  • Behrens, B.-A.; Götze, T. (2013): Temperature-dependent anisotropic material modeling of the sheet metal component within the polymer injection forming processProduction Engineering – Research and Development; Springer Verlag | Datei |
    DOI: 10.1007/s11740-013-0511-1
  • Behrens, B.-A.; Kosch, K.-G. (2013): Characterizing the buckling behavior of cylindrical hollow and hybrid specimens by experimental upsetting testsProduction Engineering - Research and Development, Vol. 7, S. 167-176 | Datei |
    DOI: 10.1007/s11740-013-0445-7
  • Behrens, B.-A.; Krimm, R.; Salfeld, V. (2013): New Methods to Reduce the Vibrations of the Ram and the Press Body while Blanking of Sheet MetalKey Engineering Materials Vol. 549 (2013) pp. 277-283, Trans Tech Publications, Switzerland | Datei |
  • Behrens, B.-A.; Lippold, L.; Knigge, J. (2013): Investigations of the shear behaviour of aluminium alloysProduction Engineering – Research and Development; German Academic Society for Production Engineering (WGP) | Datei |
    DOI: 10.1007/s11740-013-0450-x
  • Behrens, B.-A.; Maier, H.-J.; Bach, F. W.; Reimche, W.; Mroz, G.; Schrödter, J.; Jocker, J. (2013): A method to detect the level and direction of mechanical forces with the aid of load-induced martensitic phase transformationProduction Engineering: Research & Development, Springer Verlag, Online veröffentlicht am 16.11.2013 | Datei |
  • Behrens, B.-A.; Overmeyer, L.; Barroi, A.; Frischkorn, C.; Hermsdorf, J.; Kaierle, S.: Stonis, M.; Huskic, A. (2013): Basic study on the process combination of deposition welding and subsequent hot bulk formingProduction Engineering – Research and Development, 05/2013, S. 1-9 | Datei |
  • Behrens, B.-A.; R. Krimm; T. Nguyen (2013): Virtuelle Reglerparametrierung von Servoantrieben - Autoadaptive Anpassung der Reglerparameter mittels evolutionären Optimierungsalgorithmenwt Werkstattstechnik online, Ausgabe 10/2013, S.770-775, 2013
  • Behrens, B.-A.; Santangelo, A.; Buse, C. (2013): Acoustic emission technique for online monitoring during cold forging of steel components - a promising approach for online crack detection in metal formingProduction Engineering - Research and Development | Datei |
    DOI: 10.1007/s11740-013-0452-8
  • Behrens, B.-A.; Tekkaya, A. E.; Kosch, K.-G.; Foydl, A.; Kammler, M.; Jäger, A. (2013): Manufacturing of steel-reinforced aluminum parts by co-extrusion and subsequent forgingKey Engineering Materials, Vol. 585, S. 149-156 | Datei |
  • Behrens, B.-A.; Yilkiran, T.; Braeuer, G.; Paschke, H.; Weber, M. (2013): Potential of Duplex Plasma Deposition Processes for the Improvement of Wear Resistance of Hot Forging DiesKey Engineering Materials Vols. 554-557 pp. 345-358, 2013 | Datei |
    DOI: 10.4028/www.scientific.net/KEM.554-557.345
  • Borchert, G.; Löchte, C.; Carbone, G.; Raatz, A. (2013): A modular design kit for task-adaptable low-cost robots based on BaPaMan designin: Frontiers of Mechanical Engineering, Springer, Heidelberg, pp. 1-9 (9 pages)
    ISBN: ISSN 2095-0241
  • Bouzakis, A. ; Overmeyer, L. (2013): Position Tracking for Passive UHF RFID Tags with the Aid of a Scanned ArrayInternational Journal of Wireless Information Networks. New York: Springer US (2013), Nr. 2 - ISSN 1068-9605
    DOI: 10.1007/s10776-013-0210-z
    arXiv: 293
  • C. Frischkorn, A. Huskic, J. Hermsdorf, A. Barroi, S. Kaierle, B.-A. Behrens and L. Overmeyer (2013): Investigation on a new process chain of deposition or friction welding and subsequent hot forgingMaterialwissenschaft und Werkstofftechnik, Volume 44, Issue 9, pages 783–789, September 2013 | Datei |
  • C. Ruffert, Q. Ramadan, M.A.M. Gijs (2013): Fabrication of a High Aspect Ratio (HAR) Micropillar Filter for a Magnetic Bead-based ImmunoassayMicrosystem Technologies, Springer Verlag, Heidelberg, Germany
    DOI: 10.1007/s00542-013-1964-z
  • Carbone, G.; D'Aliesio, E.; Borchert, G.; Raatz, A. (2013): Design and validation of the binary actuated parallel manipulator BAPAMAN2in: Advanced Robotics, Taylor & Francis and The Robotics Society of Japan, 2013, pp. 1-11 (11 pages) Weitere Informationen
    ISBN: 10.1080/01691864.2013.804800
  • D. Hoheisel, C. Kelb, M. Wall, B. Roth, L. Rissing (2013): Fabrication of Adhesive Lenses Using Free Surface ShapingJ. Europ. Opt. Soc. Rap. Public., Vol. 8, 13065
  • Denkena B., Fischer R., Damm J.: (2013): Anlernarme Prozessüberwachung. Prozessüberwachungsstrategien für die Serienfertigung auf Basis multikriterieller Sensorauswertungwt Werkstattstechnik online, Jahrgang 103 (2013) H. 7/8, S. 631-636. | Datei |
  • Denkena, B., Abrao, A. M., Breidenstein, B., Mörke, T.: (2013): Surface Characterization of Components Subjected to Deep Rolling for Cyclic Loading ApplicationsNew Production Technologies in Aerospace Industry Proceedings of the 4th Machining Innovations Conference, Hannover, September 2013, S. 47-53. | Datei |
    DOI: 10.1007/978-3-319-01964-2
    ISBN: 978-3-319-01963-5
  • Denkena, B., Bickel, W., Litwinski, K.: (2013): Increase of Process Stability with Innovative Spindle DrivesNew Production Technologies in Aerospace Industry , Lecture Notes in Production Engineering 2014, S. 145-151. | Datei |
    ISBN: ISBN 978-3-319-01963-5
  • Denkena, B., Böß, V., Nespor, D., Samp, A.: (2013): Numerical simulation of process forces during re-contouring of welded parts considering different material propertiesCIRP Journal of Manufacturing Science and Technology, 6 (2013) S. 167–174. | Datei |
    DOI: 10.1016/j.cirpj.2013.05.001
  • Denkena, B., Breidenstein, B., Gey, C.: (2013): Residual Stress Development in Laser Machined PVD-Coated Carbide Cutting ToolsMaterials Science Forum, Vols. 768-769 (2014), S. 391-397. | Datei |
    DOI: 10.4028/www.scientific.net/MSF.768-769.391
  • Denkena, B., Breidenstein, B., Gey, C.: (2013): Surface Integrity of Laser Machined Carbide Cutting Tools within the PVD-Coating Process Chain10th The "A" Coatings, 2013, S. 3-13.
  • Denkena, B., Breidenstein, B., Wagner, L., Wollmann, M., Mhaede, M.: (2013): Influence of shot peening and laser ablation on residual stress state an phase composition of cemented carbide cutting insertsInt. Journal of Refractory Metals and Hard Materials 36 (2013), S. 85-89.
  • Denkena, B., Breidenstein, B.: (2013): Significance of residual stress in PVD-coated carbide cutting toolsCIRP Annals - Manufacturing Technology, Volume 62 (2013), S. 67-70. | Datei |
  • Denkena, B., Charlin, F., Merwart, M.: (2013): Competence-based process planning for the workshop productionProduction Engineering, Research and Development (WGP), published online 4. March 2013, 10 S.
    DOI: 10.1007/s11740-013-0453-7
  • Denkena, B., Flöter, F., Nespor, D., Wesling, V., Kaierle, S., Hustedt, M., Rottwinkel, B.: (2013): Bauteilregeneration bei einkristalliner Gefügestrukturwt Werkstatttechnik online, 103 (2013) H. 6, S. 476-480.
  • Denkena, B., Flöter, F.: (2013): Adaptive Cutting Force Control with a Hybrid Axis SystemInt. J. of Automation Technology, Vol.7, No.4, 2013, S. 378-384. | Datei |
  • Denkena, B., Horst, P., Schmidt, C., Behr, M., Kriegelsteiner, J.: (2013): Efficient Production of CFRP Lightweight Structures on the Basis of Manufacturing Considerations at an Early Design StageNew Production Technologies in Aerospace Industry, Lecture Notes in Production Engineering, S. 131-136. | Datei |
    DOI: 10.1007/978-3-319-01964-2_18
  • Denkena, B., Kayapinar, H.: (2013): XY-table for desktop machine tools based on a new fluidic planar driveProduction Engineering Research and Development (WGP), Published online 17 May 2013, 5 S. | Datei |
    DOI: 10.1007/s11740-013-0477-z
  • Denkena, B., Köhler, J., Breidenstein, B., Bergmann, B.: (2013): Influence of Laser Ablation on Wear Behavior of cBN Cutting InsertsEuro PM2013, congress & Exhibition, Proceedings Volume 1 - Diamant Tools. S. 75-81. | Datei |
  • Denkena, B., Köhler, J., Breidenstein, B., Mörke, T.: (2013): Surface Integrity - an Inherent Load SensorAdvanced Materials Research, Vol. 797 (2013), Trans Tech Publications, Switzerland, S. 679-684. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.797.679
  • Denkena, B., Köhler, J., Hasselberg, E.: (2013): Modeling of workpiece shape deviations in face milling of parallel workpiece compounds14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 (2013), S. 175-180. | Datei |
  • Denkena, B., Köhler, J., Kästner, J., Göttsching, T., Dinkelacker, F., Ulmer, H.: (2013): Efficient Machining of Microdimples for Friction ReductionJournal of Micro and Nano-Manufacturing, Vol. 1 (2013), Issue 1, S. 8 S. | Datei |
  • Denkena, B., Köhler, J., Krawczyk, T.: (2013): Influence of 5-axes-kinematics Geometrical Accuracy in Riblet Manufacturing ProcessesNew Production Technologies in Aerospace Industry, Lecture Notes in Production Engineering, Proceedings of the 4th Machining Innovations Conference, September 2013, Hannover, S. 69-74. | Datei |
    DOI: 10.1007/978-3-319-01964-2_10
  • Denkena, B., Köhler, J., Mörke, T., Ostermann, J., Spitschan, B.: (2013): Product Identification by Machined Micro PatternsJournal: Int. J. of Automation Technology Volume 7 No. 6 (2013), S. 735-741. | Datei |
  • Denkena, B., Köhler, J., Schindler, A.: (2013): Schneidkantenpräparation im Magnetfeld, Einflussgrößen und Wirkzusammenhänge wt Werkstattstechnik online, Jahrgang 103 (2013), H. 9, S. 721-725. | Datei |
  • Denkena, B., Köhler, J., van der Meer, M.: (2013): A roughness model for the machining of biomedical ceramics by toric grinding pinsCIRP Journal of Manufacturing Science and Technology, 6 (2013), S. 22-33. | Datei |
  • Denkena, B., Köhler, J., Ventura, C.E.H.: (2013): Customized cutting edge preparation by means of grindingPrecision Engineering, Volume 37 (2013), S. 590-598. | Datei |
  • Denkena, B., Köhler, J., Ventura, C.E.H.: (2013): Influence of grinding parameters on the quality of high content PCBN cutting insertsJournal of Materials Processing Technology, Volume 214 (2014), S. 276-284. | Datei |
  • Denkena, B., Köhler, J., Ventura, C.E.H.: (2013): Cutting edge preparation of PCBN insertsAdvanced Materials Research, Volume 797 (2013), S. 183-188. | Datei |
  • Denkena, B., Köhler, J., Ventura, C.E.H.: (2013): Cutting edge preparation of PCBN inserts by means of grinding and its application in hard turningCIRP Journal of Manufacturing Science and Technology, Volume 6 (2013), S. 246-253. | Datei |
  • Denkena, B., Köhler, J., Ventura, C.E.H.: (2013): Grinding of PCBN cutting insertsInternational Journal of Refractory Metals and Hard Materials, Volume 42 (2014), S. 91-96. | Datei |
  • Denkena, B., Konopatzki, B., Pelshenke, C.: (2013): Electro-Contact Discharge Dressing of Cut-off Grinding Disks for Natural Stone MachiningKey Engineering Materials, Vol. 548 (2013), S. 90-97. | Datei |
  • Denkena, B., Kröning, S.: (2013): Dynamic scheduling of maintenance measures in complex production systemsCIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 4, 2013, S. 292–300. | Datei |
  • Denkena, B., Kröning, S.: (2013): Prognose von Ausfallfolgekosten - Grundlage zur Terminierung von Instandhaltungsmaßnahmen innerhalb komplexer Produktionssystemewt Werstattstechinik online, Jahrgang 103 (2013) H 7/8, S. 616-621. | Datei |
  • Denkena, B., Litwinski, K., Schönherr, M.: (2013): Innovative Drive Concept for Machining RobotsProcedia CIRP, 2nd CIRP Global Web Conference - Beyond modern manufacturing: Technology for the factories of the future (CIRPe2013), Volume 9, 2013, S. 67-72. | Datei |
  • Denkena, B., Litwinski, K.M., Brouwer, D., Boujnah, H.: (2013): Design and analysis of a prototypical sensory Z-slide for machine toolsProduction Engineering Research and Development (WGP), Published Online, 29.11.2012, 6 S. | Datei |
    DOI: 10.1007/s17740-012-0419-1
  • Denkena, B., Möhring, H.C., Kayapinar, H.: (2013): A novel fluid-dynamic drive principle for desktop machinesCIRP Journal of Manufacturing Science and Technolgy, Vol. 6 (2013) 2, S. 89-97. | Datei |
  • Denkena, B., Nemeti, A.: (2013): Time-oriented pricing for the tool and mould manufacturing industryProduction Engineering Research and Development (WGP), 2013, 9 S. | Datei |
    DOI: 10.1007/s11740-013-0515-x
  • Denkena, B., Nyhuis P., Charlin, F., Meyer, G., Winter, F.: (2013): Kompetenzorientierte Produktionsplanung. Simulationsbasierte Produktionsplanung unter Berücksichtigung von Mitarbeiterkompetenzenwt Werkstattstechnik online, Jahrgang 103 (2013) H. 3, S. 216-220.
  • Denkena, B., Park. H., Behrens, B., Henjes, J., Bertys, S., Dahal, P., Lüken, I., Klassen, A.: (2013): Development of a Concept to Optimize the Energy Efficiency in Forging Process ChainsINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, Vol. 14, No. 7, July 2013, S. 1229-1236. | Datei |
    DOI: 10.1007/s12541-013-0167-y
  • Denkena, B., Schmidt, A., Henjes, J., Niederwestberg, D., Niebuhr, C.: (2013): Modeling a Thermomechanical NC-Simulation14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 (2013), S. 69–74. | Datei |
  • Denkena, B., Schmidt, C., Schultz, C., Weber. P.: (2013): Evaluation of eddy current testing for quality assurance and process monitoring of automated fiber placementComposites: Part B 56 (2014), S. 109–116. | Datei |
  • Denkena, B.; Nyhuis, P.; Charlin, F.; Meyer, G.; Winter, F. (2013): Kompetenzorientierte Produktionsplanung - Simulationsbasierte Produktionsplanung unter Berücksichtigung von MitarbeiterkompetenzenWerkstattstechnik online 103 (3), S. 216-220
  • Denkena, B.; Park, H.-S.; Behrens, B.-A.; Henjes, J.; Bertys, S.; Dahal, P.; Lüken, I.; Klassen, A. (2013): Development of a Concept to Optimize the Energy Efficiency in Forging Process ChainsInt. J. Precis. Eng. Manuf., 14, 2013, 7, pp.1229-1236 | Datei |
  • Dietrich, F.; Maaß, J.; Raatz, A. (2013): Computationally Efficient Adaption of the Window Size of Discrete Position Differentiatorsin: IEEE/ASME Transactions on Mechatronics, IEEE, 2013, Vol. 18 (4), pp. 1377-1384 Weitere Informationen
    ISBN: 10.1109/TMECH.2012.2201495
  • Dietrich, F.; Maaß, J.; Steiner, J.; Hagner, M.; Goltz, U.; Raatz, A. (2013): Dynamic Distribution of Robot Control Components under Hard Realtime Constraints - Modelling, Experimental Results and Practical Considerationsin: Journal of Systems Architecture, Elsevier, 2013, Vol. 59 (10), pp.1047-1066 Weitere Informationen
    ISBN: 10.1016/j.sysarc.2012.12.001
  • Eickemeyer, S. C.; Borcherding, T.; Schäfer, S.; Nyhuis, P (2013): Validation of Data Fusion as a Method for Forecasting the Regeneration Workload for Complex Capital GoodsProduction Engineering Research and Development 7 (2-3), pp. 131-139
    DOI: 10.1007/s11740-013-0444-8
  • Emmrich, J., Bickel, W., Denkena, B., Ponick, B.: (2013): Analysis of an integrated electromagnetic actuator prototype Innovative Klein- und Mikroantriebstechnik (GMM-FB 76), 5 S. | Datei |
    ISBN: ISBN 978-3-8007-3537-2
  • Höfinghoff, J.-F. ; Overmeyer, L. (2013): Resistive Loaded Antenna for Ground Penetrating Radar inside a Bottom Hole AssemblyAntennas and Propagation, IEEE Transactions on, 2013. - ISSN 0018-926X
    DOI: 10.1109/TAP.2013.2283604
  • K.-G. Kosch, P. Freytag, T. Matthias, K. Kerber, A. Bouguecha (2013): Verbund-Gießschmieden hybrider AluminiumbauteileMaterialwissenschaft und Werkstofftechnik, Volume 44, Issue 10, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 819–824 | Datei |
  • Krüger, M., Denkena, B.: (2013): Model-based identification of tool runout in end milling and estimation of surface roughness from measured cutting forcesInternational Journal of Advanced Manufacturing Technology, 65, 5-8, 2013, S.1067-1080. Published online 26 May 2012, 14 S. | Datei |
    DOI: 10.1007/s00170-012-4240-y
  • Krüger, M., Denkena, B.: (2013): A model-based approach for monitoring of shape deviations in peripheral milling International Journal of Advanced Manufacturing Technologies, Vol. 67 (2013), Iss. 9-12, Published online: 15.01.2013, S. 2537-2550.
    DOI: 10.1007/s00170-012-4672-4
  • Lietmeyer, C., Denkena, B., Krawczyk, T., Kling, R., Overmeyer, L., Wojakowski, B., Reithmeier, E., Scheuer R., Vynnyk, T., Seume, J.R.: (2013): Recent Advances in Manufacturing of Riblets on Compressor Blades and Their Aerodynamic ImpactJournal of Turbomachinery, Volume 135, July 2013, 10 S. | Datei |
    DOI: 10.1115/1.4007590
  • Mathiak, T. ; Overmeyer, L. ; Gau, V. (2013): Projekt SEMT – Sensorische Erkennung der Materialart und Erfassung der Trennfläche am SchaufelradbaggerWorld of Mining – Surface & Underground. Clausthal-Zellerfeld: GDMB Verlag GmbH vol. 65 (2013), Nr. 4, S. 227 - 235 - ISSN 1613-2408
  • Meyer, J.; Franke, S.; Geck, B.; Overmeyer, L. (2013): Hybrid antenna design for an optically powered SHF RFID transponder applicable in metalsInternational Journal of Microwave and Wireless Technologies / Volume 5 / Special Issue 03 / June 2013, pp 241-247
    DOI: 10.1017/S1759078713000585
  • Nyhuis, P.; Beck, S.; Schmidt, M. (2013): Model-based logistic controlling of converging material flowsCIRP Annals - Manufacturing Technology 62 (1), pp. 431-434
    DOI: 10.1016/j.cirp.2013.03.041
  • Nyhuis, P.; Münzberg, B.; Schmidt, M. (2013): Oft rüsten hilft viel – Losgrößenbildung in der ProduktionControlling, 25 (8-9), S. 479-486
  • Overmeyer L.; Kleinert S.; Radosavac M.; Krühn T.; Heißmeyer S.; Bentlage A. (2013): Kognitive Transportsysteme durch optische Technologien Wt-online. Düsseldorf: Springer-VDI-Verlag GmbH & Co. KG (2013), Nr. 2, S. 139- 145 Weitere Informationen
  • Overmeyer, L., Schütz, V., Horn, A., & Stute, U. (2013): Laser induced quasi-periodical microstructures with external field modulation for efficiency gain in photovoltaicsCIRP Annals-Manufacturing Technology, Volume 62, Issue 1, 2013, Pages 207–210
  • Peshekhodov, I.; Schneider, M. (2013): Numerical Investigations on Cutting of Dual-Phase Sheet Steel with an Emphasis on Material Damage at the Cut EdgeAdvanced Materials Research; Ausgabe: 769; Seiten: 101-108 | Datei |
  • Q. Ramadan, H. Jafarpoorchekab, Ch. Huang, P. Silacci, S. Carrara, G. Koklü, J. Ghaye, J. Ramsden, C. Ruffert, G. Vergeres, M.A.M. Gijs (2013): NutriChip: nutrition analysis meets microfluidicsLab on a Chip, Vol. 13, pp. 196-203
  • Reinema, C.; Schmiedgen, P.; Noennig, J. R.; Nyhuis, P (2013): Kommunikationsstrukturen in Fabriken: Konzept zur Gestaltung dynamischer Geschäfts- und Kommunikationsprozesse in FabrikenWerkstattstechnik online 103 (3), S. 269-274
  • Salfeld, V.; Krimm, R.; Hübner, S.; Matthias, T.; Vucetic, M. (2013): Sheet-Bulk Metal Forming of Symmetric and Asymmetric PartsAdvanced Materials Research Vol. 769 (2013), pp. 229-236 | Datei |
  • Santangelo,A.; Blanke,P.; Hadifi,T.; Wolter,F.-E.; Behrens,B.-A. (2013): Fast 3D inverse simulation of hot forging processes via Medial Axis Transformation: an approach for preform estimation in hot die forgingProduction Engineering - Research and Development | Datei |
    DOI: 10.1007/s11740-013-0461-7
  • Schepers, S. W.; Meyer, G.; Wulf, S.; Nyhuis, P. (2013): Ressourceneffizienz kontinuierlich entwickeln - Verbesserung der Ressourceneffizienz in bestehenden ProduktionsbetriebenWerkstattstechnik online 103 (4), S. 264-268
  • Teichrib, S.; Krimm, R. (2013): Electromagnetic Material Feeder for High Speed RatesAdvanced Materials Research Vol. 769, pp 213-220, Trans Tech Publications, Switzerland, 2013 | Datei |
  • V. Salfeld, T. Matthias, R. Krimm, B.-A. Behrens, P. Sieczkarek, N. Ben Khalifa, A. E. Tekkaya, H. Hetzner, S. Tremmel, S. Wartzack (2013): Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen, 2. Workshop Blechmassivumformung 2013 | Datei |
    ISBN: 978-3-87525-353-5
  • Bassett, E., Köhler, J., Denkena, B.: (2012): On the honed cutting edge and its side effects during orthogonal turning operations of AISI1045 with coated WC-Co insertsCIRP Journal of Manufacturing Science and Technology, Volume 5 (2012) 2, S. 108–126.
  • Behrens, B.-A. Krimm, R.; Salfeld V. (2012): Process-Machine Interaction in Sheet-Bulk Metal FormingKey Engineering Materials Vols. 504-506 (2012) pp 999-1004 | Datei |
  • Behrens, B.-A.; Bach, Fr.-W.; Bouguecha, A; Nürnberger, F.; Schaper, M.; Yu, Z.; Klassen, A. (2012): Numerische Berechnung einer integrierten Wärmebehandlung für präzisionsgeschmiedete BauteileHTM, Jahrgang 67, 2012, Heft 5, S.337-343 | Datei |
  • Behrens, B.-A.; Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W. (2012): EcoForge: Resource-efficient process chains for high performance partsKey Engineering Materials, Vol. 504-506, S. 151-156 | Datei |
  • Behrens, B.-A.; Bouguecha, A. (2012): Numerische und experimentelle Untersuchungen zum Matrizenpressen und Sintern von AluminiumpulverMat.-wiss. und Werkstofftech. 43 (6), 511-519 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Eckold, C.-P.; Peshekhodov, I. (2012): A new clinching process especially for thin metal sheets and foilsKey Engineering Materials Vols 504-506 (2012), S. 783-788 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I. (2012): Characterisation of the quasi-static flow and fracture behaviour of dual-phase steel sheets in a wide range of plane stress statesArchives of Civil and Mechanical Engineering 12 (2012) 397 – 406 | Datei |
  • Behrens, B.-A.; Frischkorn, C.; Lüken, I. (2012): Development of an innovative monitoring system for spray fields in hot forging processes Production Engineering – Research and Development; German Academic Society for Production Engineering (WGP) (doi: 10.1007/s11740-012-0396-4) | Datei |
  • Behrens, B.-A.; Gaebel, C. M. (2012): Formability of an anti-fingerprint clear coating on satin stainless steel sheet metalProduction Engineering – Research and Development (WGP) (Prod. Eng. Res. Devel. DOI 10.1007/s11740-012-0434-2) | Datei |
  • Behrens, B.-A.; Kosch, K.-G.; Frischkorn, C.; Vahed, N.; Huskic, A. (2012): Compound forging of hybrid powder-solid-parts made of steel and aluminumKey Engineering Materials, Vol. 504-506, S. 175-180 | Datei |
  • Behrens, B.-A.; Krimm, R.; Kammler, M.; Schrödter, J.; Wager, C. (2012): Fatigue analysis of a mechanical press by means of the hybrid multi-body simulationProduction Engineering 6/2012 pp. 421 - 430, Springer, Heidelberg, 2012 | Datei |
  • Behrens, B.-A.; Krimm, R.; Matthias, T.; Salfeld, V. (2012): Analysis of Machine Influence on Process Stability in Sheet-Bulk Metal FormingProcedia CIRP Vol. 3 (2012) S. 32 – 36 | Datei |
  • Behrens, B.-A.; Krimm, R.; Teichrib, S.; Czora, M.; Cahyono, T.; Wager, C.; Ortmaier, T.; Riva, M.; Hussong, A.; Dagen, M. (2012): Hochleistungsmagnetaktorik als Pressenantrieb, wt Werkstattstechnik online, 102. Jahrgang, Ausgabe 3, S.171-174, 2012 | Datei |
  • Behrens, B.-A.; Vahed, N.; Kammler, M. (2012): Functionalisation of PM Components by Integration of Inherent Data Carriers and Sensory ElementsProduction Engineering Research and Development, 2012, online first, DOI 10.1007/s11740-012-0428-0 | Datei |
  • Behrens, B.-A.; Voges-Schwieger, K.; Bouguecha, A.; Mielke, J.; Vucetic M. (2012): Material Characterization for Sheet-Bulk Metal FormingKey Engineering Materials Vols. 504-506 (2012) pp 1029-1034, Trans Tech Publications, Switzerland, doi:10.4028 | Datei |
  • Behrens, B.-A.; Yilkiran, T. (2012): Influence of the fabrication method on the wear resistance of hot forging dies; Production Engineering – Research and Development; German Academic Society for Production Engineering (WGP) (doi: 10.1007/s11740-012-0373-y) | Datei |
  • Behrens, B.-A; Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W (2012): EcoForge: Resource-efficient process chains for high performance parts Key Engineering Materials, Vol. 504-506, S. 151-156 | Datei |
  • Boldering, A.; Raatz, A. (2012): An active tool holding devicein: Production Engineering, Springer, 2012, Vol. 6, pp. 513-520 Weitere Informationen
    ISBN: 10.1007/s11740-012-0402-x
  • Böß, V., Brüning, J., Denkena, B.: (2012): Standardized Communication in Simulation of Interacting Machine Tool ComponentsConcurrent Engineering Approaches for Sustainable Product Development in a Mulit-Disciplinary Environment, J. Stjepandic et al. (eds.), S.825-836.
  • Bouguecha, A.; Hadifi, T.; Mielke, J.; Behrens, B.-A. (2012): Erhöhung der Berechnungsgenauigkeit bei der numerischen Abbildung von Warmmassivumformprozessen durch verbesserte ReibmodellierungMaterialwissenschaft und Werkstofftechnik, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, Volume 43, No 10, 2012, S.839-850, ISSN: 0933-5137 | Datei |
  • Bouguecha, A.; Odening, D.; Huskic, A.; Hadifi, T. (2012): Numerical and experimental investigations on the heat treatment of forgingsin: Behrens, B.-A., Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W.: EcoForge: Resource-efficient process chains for high performance parts, Key Engineering Materials, Vol. 504-506, S. 151-156 | Datei |
  • Bouguecha, A.; Odening, D.; Huskic, A.; Hadifi, T; (2012): Numerical and experimental investigations on the heat treatment of forgings, in: Behrens, B.-A., Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W.: EcoForge: Resource-efficient process chains for high performance parts Key Engineering Materials, Vol. 504-506, S. 151-156 | Datei |
  • Denkena, B., Behrens, B.-A., Charlin, F., Dannenberg, M.: (2012): Integrative process chain optimization using a Genetic AlgorithmProduction Engineering Research and Development (WGP), Vol.6 (2012) Number 1, S. 29-37.
  • Denkena, B., Bickel, W., Sellmeier, V.: (2012): Flank milling of compliant workpieces with chamfered toolProduction Engineering Research and Development (WGP), Volume 6 (2012) Numbers 4-5, S. 403-412. | Datei |
  • Denkena, B., Blümel, P., Kröning, S., Röbbing, J.: (2012): Condition based maintenance planning of highly productive machine toolsProduction Engineering Research and Development (WGP), Volume 6 (2012) Number 3, S. 277-285. | Datei |
  • Denkena, B., Böß, V., Brüning, J.: (2012): Schnittstellenkonzept für virtuelle Werkzeugmaschinenmodule. Anforderungen an die Standardisierung von Kopplung und Kommunikation unterschiedlicher Teilmodellewt Werkstattstechnik online, 102 (2012) H. 1/2, S. 16-23. | Datei |
  • Denkena, B., Breidenstein, B., Wagner, L., Wollmann, M., Mhaede, Mansour.: (2012): Influence of shot peening and laser ablation on residual stress state and phase composition of cemented carbide cutting insertsInt. Journal of Refractory Metals and Hard Materials, 7/2012, S. 85-89.
  • Denkena, B., Breidenstein, B.: (2012): Residual Stress Distribution in PVD-Coated Carbide Cutting Tools - Origin of Cohesive DamageTribology in Industry, Vol. 34 (2012) No. 3, S. 158-165. | Datei |
  • Denkena, B., Gümmer, Olaf: (2012): Process stabilization with an adaptronic spindle systemProduction Engineering Research and Development (WGP), Published online 19 June 2012, DOI 10.1007/s11740-012-0397-3, 8 S. | Datei |
  • Denkena, B., Köhler, J., Hahmann, D.: (2012): Grinding of steel-ceramic-compositesInt. J. Abrasive Technology, Vol. 5, No. 2, 2012, Vol. 5 (2012) No. 2, S. 152-174.
  • Denkena, B., Köhler, J., Kästner, J.: (2012): Chip formation in grinding: an experimental studyProduction Engineering Research and Development (WGP), Volume 6 (2012) Number 2, S. 107-115. | Datei |
  • Denkena, B., Köhler, J., Mengesha, M.S.: (2012): Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperatureProduction Engineering Research and Development, Vol. 6, Number 4-5, September 2012, S. 329-338.
  • Denkena, B., Köhler, J., Woiwode, S.: (2012): Leistungsfähige Werkzeugkonzepte für das kontinuierliche Wälzschleifen. Verzahnungsschleifen mit keramisch gebundenen CBN-Wälzschleifwerkzeugen wt Werkstattstechnik online, 102 (2012) H. 6, S. 377-382. | Datei |
  • Denkena, B., Krüger, M., Bachrathy, D., Stepan, G.: (2012): Model based reconstruction of milled surface topography from measured cutting forces International Journal of Machine Tools & Manufacture, 54-55 (2012), S. 25-33. | Datei |
    DOI: DOI: http://dx.doi.org/10.1016/j.ijmachtools.2011.12.007
  • Denkena, B., Lorenzen, L.E., Schmidt, J.: (2012): Adaptive process planningProduction Engineering Research an Development (WGP), Vol. 6 (2012) Number 1, S. 55-67.
  • Denkena, B., Nemeti, A.: (2012): Unternehmensbezogene Wissensaggregation zur AngebotsbestimmungIndustrie Management, 28 (2012) 3, S. 43-46.
  • Denkena, B., Plümer, S., Kaddour, R., Gümmer, Olaf: (2012): Verzugsminimierung bei der Titan-Großteilefertigung. Kompensation eigenspannungsbedingter Bauteilverzüge mittels adaptivem Spannsystem und angepasster NC-Bahnwt Werkstattstechnik online, 102 (2012) H. 9, S. 573-578. | Datei |
  • Denkena, B., Turger, A., Behrens, L., Krawczyk, T.: (2012): Five-Axis-Grinding With Toric Tools: A Status ReviewJournal of Manufacturing Science and Engineering, October 2012, Vol. 134, 6 S.
  • Denkena, B.; Behrens, B.-A.; Charlin, F.; Dannenberg, M. (2012): Integrative process chain optimization using a Genetic Algorithm, Production Engineering - Research and Development, Springer-Verlag, Berlin Heidelberg, September 2011 (online first), Februar 2012 (printed), Vol. 6, Number 1, pp. 29-37 | Datei |
  • Dietrich, F.; Löchte, C.; Jeschke, S.; Raatz, A. (2012): An agent-based concept for planning and control of the production of carbon fibre reinforced plastics aircraft structures with mobile production unitsin: Production Engineering, Springer, 2012, Vol. 6 (4-5), pp. 531-539 Weitere Informationen
    ISBN: 10.1007/s11740-012-0388-4
  • Dittrich, M.A., Gutowski, T.G., Cao, J., Roth, J.T., Xia, Z.C., Kiridena, V., Ren, F., Henning, H.: (2012): Exergy analysis of incremental sheet formingProduction Engineering Research and Development (WGP), Volume 6 (2012) Number 2, S. 169-177. | Datei |
  • Horn, A. ; Kalmbach, C.-C. ; Moreno, J. G. ; Schütz, V. ; Stute, U. ; Overmeyer, L. (2012): Laser-Surface-Treatment for Photovoltaic ApplicationsPhysics Procedia vol. 39 (2012), Nr. 0, S. 709 - 716 - ISSN 1875-3892 Weitere Informationen
    DOI: 10.1016/j.phpro.2012.10.092
  • Hötte, S.; von Daacke, S.; Schulz, L.; Overmeyer, L.; Wennekamp, T; (2012): The Way to the DIN 22123 – Indentation Rolling Resistance of Conveyor BeltsBulkSolids Handling. Würzburg: Vogel Business Media, Nr. 6, S. 48-52 - ISSN 0173-9980
  • Kaierle, S. ; Barroi, A. ; Noelke, C. ; Hermsdorf, J. ; Overmeyer, L. ; Haferkamp, H. (2012): Review on Laser Deposition Welding: From Micro to MacroPhysics Procedia vol. 39 (2012), Nr. 0, S. 336 - 345 - ISSN 1875-3892 Weitere Informationen
    DOI: 10.1016/j.phpro.2012.10.046
  • Klemke, T.; Mersmann, T.; Nyhuis, P. (2012): Wandlungsfähige Produktionssysteme - Methodik zur Bewertung und Gestaltung der WandlungsfähigkeitWerkstattstechnik online 102 (4), S. 222-227
  • Köhler, J., Schindler, A., Woiwode, S.: (2012): Continuous generating grinding—Tooth root machining and use of CBN-toolsCIRP Annals - Manufacturing Technology (2012), http://dx.doi.org/10.1016/j.cirp.2012.03.033, 4 S. | Datei |
  • Krüger, M., Denkena, B.: (2012): Model-based identification of tool runout in end milling and estimation of surface roughness from measured cutting forcesInternational Journal of Advanced Manufacturing Technology, Published online 26 May 2012, DOI 10.1007/s00170-012-4240-y, 14 Seiten.
  • Lödding, H.; Nyhuis, P.; Schmidt, M.; Kuyumcu, A (2012): Modelling lateness and schedule reliability: how companies can produce on timeProduction Planning & Control: The Management of Operations 25 (1), pp. 59-72
    DOI: 10.1080/09537287.2012.655803
  • Mersmann, T.; Klemke, T.; Nyhuis, P. (2012): Gestaltung eines Kommunikationsprozesses für Wandlungsprozesse im Unternehmen - Ein Ansatz zur verlustfreien Kommunikation im UnternehmenIndustrie Management 28 (6), S. 41-44
  • Möhring, H.-C., Bertram, O.: (2012): Integrated autonomous monitoring of ball screw drivesCIRP Annals - Manufacturing Technology, 61 (2012), S. 355-358. | Datei |
  • Möhring, H.C., Flöter, F., Denkena, B.: (2012): Messtechnische Analyse formflexibler Spannmethoden. Experimenteller Vergleich verschiedener Spanntechnikenwt Werkstatttechnik online, 102 (2012) H. 11/12, S. 795-800.
  • Münzberg, B.; Schmidt, M.; Beck, S.; Nyhuis, P. (2012): Model based logistic monitoring for supply and assembly processesProduction Engineering Research and Development 6 (4-5), pp. 449-458
    DOI: 10.1007/s11740-012-0403-9
  • Overmeyer, L.; Düsing, J. F.; Suttmann, O.; Stute, U. (2012): Laser patterning of thin film sensors on 3-D surfacesCIRP Annals - Manufacturing Technology (2012), Article in press
    DOI: 10.1016/j.cirp.2012.03.087
  • Paschke, H.; Weber, M.; Brauer, G.; Yilkiran, T.; Behrens, B.-A.; Brand, H. (2012): Optimized plasma nitriding processes for efficient wear reduction of forging diesArchives of Civil and Mechanical Engineering 12 S. 407-412, dx.doi.org/10.1016/j.acme2012.06.001 | Datei |
  • Patzke, Ro., Patzke, Re., Dengler, B.: (2012): Materialflussoptimierung mittels agentenbasiertem MES. Intelligente Analyse und Optimierung von Produktionssystemenwt Werkstattstechnik online, 102 (2012) H. 4, S. 253-256. | Datei |
  • Pluemer, S.; Voges-Schwieger, K.; Denkena, B.; Behrens, B.-A. (2012): Development of an Advanced Micro-Positioning System for Increasing Operation Accuracy– Consideration of high pressure sealingProd. Eng. Res. Devel., 2012, DOI 10.1007/s11740-012-0361-2
  • Plümer, S., Voges-Schwieger, K., Denkena, B., Behrens, B.-A.: (2012): Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealingProduction Engineering Research and Development (WGP), Vol. 6 (2012) Number 2, S. 213-218. | Datei |
  • Raatz, A.; Rathmann, S.; Hesselbach, J. (2012): Process development for the assembly of microsystems with hot melt adhesivesin: CIRP Annals - Manufacturing Technology, Elsevier B.V., 2012, Vol. 61 (1) Weitere Informationen
    ISBN: 0007-8506
  • Rodman, D., Krause, C., Nürnberger, F., Bach, F.-W., Gerdes, L., Breidenstein, B.: (2012): Investigation of the surface residual stresses in spray cooled induction hardened gearwheelsInternational Journal of Materials Research, 103 (2012) 1, S. 73-79. | Datei |
  • Rolfs, K.; Chmielus, M.; Guldbakke, J. M.; Wimpory, R.; Raatz, A.; Petry, W. ; Müllner, P. (2012): Key Properties of Ni-Mn-Ga based Single Crystals grown with SLARE techniquein: Advanced Engineering Materials, Wiley-VCH Verlag, Weinheim, 2012, Vol. 14 (8), pp. 614-635 Weitere Informationen
  • Schlüter, K.; Holz, B.; Raatz, A. (2012): Principle Design of Actuators Driven by Magnetic Shape Memory Alloysin: Advanced Engineering Materials, Wiley-VCH Verlag, Weinheim, 2012, pp. 682-686 Weitere Informationen
    ISBN: 10.1002/adem.201200078
  • Schmidt, M.; Hartmann, W.; Nyhuis, P. (2012): Simulation based comparison of safety-stock calculation methodsCIRP Annals - Manufacturing Technology 61 (1), pp. 403–406
    DOI: 10.1016/j.cirp.2012.03.054
  • Schütz, D.; Raatz, A.; Hesselbach, J. (2012): Adapted task configuration of a reconfigurable binary parallel robot with PRRRP structurein: Robotica, Cambridge University Press, 2012 Weitere Informationen
  • Sellmeier, V., Denkena, B.: (2012): High speed process damping in millingCIRP Journal of Manufacturing Science and Technology, 5 (2012), S. 8-19. | Datei |
  • T. Creutzburg, L. Rissing, T. Lenarz, G. Reuter (2012): Design and Fabrication of a Microactuator for a Hearing AidInt. Journal of Applied Electromagnetics and Mechanics, Vol. 39, pp. 471-477
  • T. Schultheis, D. Hoheisel, W. Xiao, L. Spani Molella, E. Reithmeier, L. Rissing, S. Hardt (2012): Performance of an Adaptive Liquid Microlens Controlled by a Microcoil ActuatorMicrofluidics and Nanofluidics, Springer Verlag, Vol. 13, Issue 2, pp 299-308
    DOI: 10.1007/s10404-012-0961-3
  • Unger, C. ; Koch, J. ; Overmeyer, L. ; Chichkov, B. N. (2012): Time-resolved studies of femtosecond-laser induced melt dynamicsOpt. Express vol. 20 (2012), Nr. 22, S. 24864-24872 - ISSN 1094-4087
    DOI: 10.1364/OE.20.024864
  • von Witzendorff, P.; Moalem, A.; Kling, R.; Overmeyer, L (2012): Laser dressing of metal bonded diamond blades for cutting of hard brittle materialsJOURNAL OF LASER APPLICATIONS 24 (2012), Nr. 2 - ISSN 1042-346X
    DOI: 10.2351/1.3685300
  • Weckenmann, A.; Reithmeier, E.; Behrens, B.-A.; Wartzack, S.; Akkasoglu, G.; Ohrt, C.; Salfeld, V.; Breitsprecher, T.; Plugge B.; Schneider, T. (2012): Methodengestüzte Referenzvorgehensweise für neue UmformverfahrenZeitschrift für wirtschaftlichen Fabrikbetrieb | Datei |
  • Yilkiran, T.; Behrens, B.-A.; Paschke, H.; Weber, M.; Brand, H. (2012): The potential of plasma deposition techniques in the application field of forging processes, Archives of Civil and Mechanical Engineering 12 (2012), S. 284-291, dx.doi.org/10.1016/j.acme2012.06.002 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Krimm, R.; Matthias, T.; Salfeld, V. (2011): Characterization of Horizontal Loads in the Production of Asymmetrical PartsJournal “Key Engineering Materials”, Vol. 473, pp 223-228, Trans Tech Publications, Switzerland | Datei |
  • Behrens, B.-A.; Bouguecha,A.; Hadifi T.; Mielke J. (2011): Advanced Friction Modeling for Bulk Metal Forming Processes. Production Engineering – Research and Development, Springer Verlag, Berlin, Vol. 5, Number 6 (2011), pp. 621-627 | Datei |
  • Behrens, B.-A.; Bräuer, G.; Paschke, H.; Bistron, M. (2011): Reduction of wear at hot forging dies by using coating systems containing boron, Production Engineering – Research and Development (doi: 10.1007/s11740-011-0308-z) | Datei |
  • Behrens, B.-A.; El Nadi, T.; Krimm, R. (2011): Development of an analytical 3D-simulation model of the levelling process, Journal of Materials Processing Technology, Volume 211, Issue 6 (2011) pp. 1060 – 1068, ISSN 0924-0136 | Datei |
  • Behrens, B.-A.; Hübner, S.; Krimm, R.; Wager, C.; Vucetic, M.; Cahyono, T. (2011): Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses; Journal "Key Engineering Materials", S.217-222, Vol. 473, Trans Tech Publications, Switzerland | Datei |
  • Behrens, B.-A.; Kosch, K.-G. (2011): Development of the heating and forming strategy in compound forging of hybrid steel-aluminum partsMaterials Science and Engineering Technology, Vol. 42, Nr. 11, S. 973-978 | Datei |
  • Behrens, B.-A.; Kosch, K.-G. (2011): Production of Strong Steel-Aluminum Composites by Formation of Intermetallic Phases in Compound Forgingsteel research international, Vol. 82, Nr. 11, S. 1261-1265, November 2011 | Datei |
  • Behrens, B.-A.; Kosch, K.-G. (2011): Influence of different alloying elements on the intermetallic phase seam thickness of compound forged steel-aluminum parts, Production Engineering - Research and Development, Vol. 5, S. 517–522 | Datei |
  • Behrens, B.-A.; Seidel, H.-J.; Lange, F.; Kammler, M. (2011): Vergleichende experimentelle und numerische Untersuchungen zum schwingungsüberlagerten Pressen zweier PulvermaterialienMaterialwissenschaft und Werkstofftechnik 2011, 42, No. 8, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, S. 705 - 711 | Datei |
    DOI: 10.1002/mawe.201100757
  • Behrens, B.-A.; Vahed, N.; Gastan, E.; Lange, F. (2011): Experimental and Numerical Investigation on Manufacturing Methods of PM Components with Integrated Information Storage, Journal of Advanced Manufacturing Systems, vol. 10 (2011), no. 1, pp. 11-20, ISSN 0219-6867 (printed), ISSN 1793-6896 (online), World Scientific Publishing Co., Singapore, July 2011 | Datei |
  • Behrens, B.-A.; Yilkiran, T. (2011): Einfluss des Herstellverfahrens auf das Einsatzverhalten von Schmiedewerkzeugen wt Werkstattstechnik online, Jahrgang 101, Heft 10/ 2011, S. 660-667, Springer-VDI-Verlag, Düsseldorf, Oktober 2011 | Datei |
  • Behrens,B.-A.; El Nadi, T.; Krimm, R. (2011): Automatisierung des Richtprozesses zum Minimieren der Blechkrümmung; wt Werkstattstechnik online, 10-2011, Seite 686-691, SPRINGER-VDI-VERLAG | Datei |
  • Belski, A.; Gastan, E.; Vahed, N.; Klose, C.; Rodman, M.; Lange, F.; Wurz, M. C.; Bormann, D.; Rissing, L.; Behrens, B.-A.; Bach, Fr.-W. (2011): Process Principle for the Production of Sintered Dynamic Component-inherent Data Storage, Production Engineering - Research and Development, vol. 5 (2011), no. 3 pp. 233-240, ISSN 0944-6524 (printed), ISSN 1863-7353 (online), Springer-Verlag, Berlin Heidelberg, December 2010 (online first), May 2011 (printed/online) | Datei |
  • Bistron, M.; Mayrhofer, P.; Paschke, H.; Stüber, M.; Ziebert, C. (2011): Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools; Surface and Coatings Technology; (doi: 10.1016/j.surfcoat.2011.04.097) | Datei |
  • Blumenthal, P.; Hemken, G.; Raatz, A. (2011): Klebspannen von komplexen miniaturisierten Werkstückenin: Mikroproduktion, Carl Hanser Verlag, München, 2011, Ausgabe 04/11, S. 44-47
    ISBN: 1614-4538
  • Borchert, G.; Burisch, A.; Raatz, A. (2011): APIS - A Miniaturized Robot for Precision Assembly with Low-Cost Piezoelectric Motorsin: International Journal of Precision Engineering and Manufacturing, Springer, Vol. 12, Nr. 4, 2011, pp. 629-634 (6 pages) Weitere Informationen
    ISBN: 1229-8557
  • Brecher, C., Denkena, B., Grossmann, K., Steinmann, P., Bouabid, A., Heinisch, D., Hermes, R., Löser, M.: (2011): Identification of weak spots in the metrological investigation of dynamic machine behaviourProduction Engineering, Research and Development, Volume 5 (2011) Number 6, S. 679-689.
  • Burisch, A.; Raatz, A. (2011): Investigation and strategies for precision of miniaturized robots with micro gearsin: Journal of Assembly Automation, Emerald, 2011, 31/4, pp. 319-328 Weitere Informationen
    ISBN: 0144-5154
  • Denkena, B., Behrens, B.-A., Charlin, F., Dannenberg, M.: (2011): Integrative process chain optimization using a Genetic Algorithm.Production Engineering Research and Development (WGP), Published online 21. September, 9 Seiten. | Datei |
  • Denkena, B., Bickel, W., Ponick, B., Emmrich, J.: (2011): Dynamic analysis of a motor-integrated method for a higher milling stability.Production Engineering Research and Development (WGP), Vol. 5 (2011) Number 6, S. 691-699. | Datei |
  • Denkena, B., Böß, V., Kaddour, R., Friederichs, J., Bassett, E.: (2011): Automatisiertes Entgraten mit Industrierobotern - durchgängige CAx-Prozesskette. Mit der highFlex-Technologie von der Konstruktion bis zum Fertigteil.wt Werkstattstechnik online, 101 (2011) H. 9, S. 623-628. | Datei |
  • Denkena, B., Böß, V., Nespor, D., Samp, A.: (2011): Kinematic and Stochastic Surface Topography of Machined TiAl6V4-Parts by means of Ball Nose End Milling.1st CIRP Conference on Surface Integrity (CSI), Procedia Engineering, 19 (2011), S. 81-87. | Datei |
    DOI: 10.1016/j.proeng.2011.11.083
  • Denkena, B., Eikötter, M., Apmann, H., Berndt, D., Goesmann, R., Hicken, G., Wadepohl, W.: (2011): Lean Production von Flugzeugstrukturbauteilen mit Unterstützung der Digitalen Fabrik. Implementierung modularer Ladungsträger beim EADS-Tochterkonzern Premium Aerotec.wt Werkstattstechnik online, 101 (2011) H. 3, S. 105-109. | Datei |
  • Denkena, B., Henjes, J., Henning, H.: (2011): Simulation-based dimensioning of manufacturing process chains.CIRP Journal of Manufacturing Science and Technology, 4 (2011), S. 9-14. | Datei |
  • Denkena, B., Immel, J., Schönherr, M.: (2011): Industrieroboter für spanende Bearbeitungen.wt Werkstattstechnik online, 101 (2011) H. 9, S. 617-622. | Datei |
  • Denkena, B., Immel, J., Schönherr, M.: (2011): Adaptronic Systems in Robot ManufacturingAdvanced Materials Research, Vols. 383-390 (2012), Seite 1013-1018. | Datei |
    DOI: 10.4028/www.scientific.net/AMR.383-390.1013
  • Denkena, B., Köhler, J., Behrens, L., Turger, A., Hahmann, D., van der Meer, M.: (2011): Schleifen keramischer Verschleißschutzsystemedihw- Diamant Hochleistungswerkzeuge, 3 (2011) 2, S. 34-43. | Datei |
  • Denkena, B., Köhler, J., Breidenstein, B., Mörke, T.: (2011): Elementary studies on the inducement and relaxation of residual stressProcedia Engineering, 19 (2011), 1st CIRP Conference on Surface Integrity (CSI), January 30 – February 1, 2012, Bremen, S. 88-93. | Datei |
  • Denkena, B., Köhler, J., Hahmann, D.: (2011): Grinding of Steel-Ceramic-Composites.Advanced Materials Research, Vol. 325 (2011), S. 116-121. | Datei |
  • Denkena, B., Köhler, J., Meyer, R., Stiffel, J.-H.: (2011): Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning.International Journal of Automation Technology, Vol. 5 (2011) No. 3, S. 353-361. | Datei |
  • Denkena, B., Köhler, J., Seiffert, F.: (2011): Machining of reinforced concrete using grinding wheels with defined grain pattern.International Journal of Abrasive technology, Vol. 4 (2011) No. 2, S. 101-116. | Datei |
  • Denkena, B., Köhler, J., Seiffert, F.: (2011): Stahlbetonbearbeitung mit gesetzten Trennschleifwerkzeugen. Ritzuntersuchungen zu Materialtrennmechanismen. wt Werkstattstechnik online, 101 (2011) H. 6, S. 398-406. | Datei |
  • Denkena, B., Köhler, J., Sellmeier, V., Mörke, T.: (2011): Topography prediction of resilient parts after flank milling with chamfered tools.Production Engineering Research and Development (WGP), Vol. 5 (2011) Number 3, S. 273-281. | Datei |
  • Denkena, B., Lorenzen, L.-E., Schmidt, J.: (2011): Adaptive process planning.Production Engineering Research and Development (WGP), Published online 02 December, 14 Seiten. | Datei |
  • Denkena, B., Lucas, A., Bassett, E.: (2011): Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load.CIRP Annals - Manufacturing Technology, Vol. 60 (2011) I, S. 73-76. | Datei |
  • Denkena, B., Möhring, H.-C., Gümmer, Oliver: (2011): Adaptive Dämpfung für ruckentkoppelte Antriebe. Rückspeisefähige magnetische Dämpfungseinheit für ruckentkoppelte Vorschubachsen.wt Werkstattstechnik online, 101 (2011) H. 5, S. 321-327. | Datei |
  • Denkena, B., Schürmeyer, J., Böß, V., Kaddour, R.: (2011): CAD-based cost calculation of mould cavities.Production Engineering Research and Development (WGP), Volume 5 (2011) Number 1, S. 73-79. | Datei |
  • Denkena, B., Schürmeyer, J., Eikötter, M: (2011): Linking total costs and benefits of ownership (TCBO) and process chain simulation for integrated assessment of manufacturing technologies and processes.Production Engineering Research and Development (WGP), Vol. 5 (2011) Number 5, S. 557-564.
  • Denkena, B., Schürmeyer, J., Kaddour, R., Böß, V.: (2011): Assessing mould costs analysing manufacturing processes of cavitiesInternational Journal of Advanced Manufacturing Technology, Vol. 56 (2011) Numbers 9-12, S. 943-949.
  • Erdmann, N., Angrisani, N., Reifenrath, J., Lucas, A., Thorey, F., Bormann, D., Meyer-Lindenberg, A.: (2011): Biomechanical testing and degradation analysis of MgCa0.8 alloy screws: A comparative in vivo study in rabbits.Acta Biomaterialia, 7 (2011), S. 1421-1428. | Datei |
  • Frädrich, T.; Pachow-Frauenhofer, J.; Fiege, T.; Nyhuis, P. (2011): Aerodynamic feeding systems: An example for changeable technologyAssembly Automation 31 (1), pp. 47-52 Weitere Informationen
  • Höfinghoff, J.-F.; Jungk, A.; Knop, W.; Overmeyer, L. (2011): Using 3D Field Simulation for Evaluating UHF RFID Systems on Forklift TrucksIEEE Transactions on Antennas and Propagation Vol. 59, Nr. 2, S. 689-691, 2011.
    DOI: 10.1109/TAP.2010.2096193
  • Hötte, S.; Overmeyer, L.; Wennekamp, T. (2011): Form Force Behaviour of Pipe Conveyors in Different Curve RadiiBulk Solids Handling, Mining Special Vol. 31, Nr. 3, S. 164-169. Würzburg: Vogel Business Media, 2011.
  • Hvam, L., Bonev, M., Denkena, B., Schürmeyer, J., Dengler, B.: (2011): Optimizing the order processing of customized products using product configuration.Production Engineering, Research and Development (WGP), Volume 5 (2011) Number 6, S. 595-604. | Datei |
  • Krühn, T.; Heiserich, G.; Overmeyer, L. (Hrsg.) (2011): Kooperative Wegplanung für dynamisch konfigurierbare Transportmoduleat-automatisierungstechnik Vol. 59, Nr. 4, S. 235-241: Oldenbourg Verlag | Datei |
    DOI: 10.1524/auto.2011.0916
  • Löchte, C.; Schmaljohann, F.; Raatz, A. (2011): Mikroantriebe mit Hebelwirkungin: Mikroproduktion, MIKROvent GmbH, 2011, 41944, S. 54-87
    ISBN: 1614-4538
  • Marchenko, M.; Behrens, B.-A.; Wrobel, G.; Scheffler, R.; Pleßow, M.: (2011): A New Method of Visualization and Documentation of Parametric Information of 3D CAD Models, Computer-Aided Design & Applications, 8(3), 2011, 435-448 | Datei |
  • Möhring, H.-C., Gümmer, Olaf, Fischer, R.: (2011): Active error compensation in contour-controlled grinding. CIRP Annals - Manufacturing Technology, Vol. 60 (2011) I, S. 429-432. | Datei |
  • Neugebauer, R., Bouzakis, K.-D., Denkena, B., Klocke, F., Sterzing, A., Tekkaya, A.E., Wertheim, R.: (2011): Velocity effects in metal forming and machining processes.CIRP Annals - Manufacturing Technology, Vol. 60 (2011) I, S. 627-650. | Datei |
  • Overmeyer, L. ; Hötte, S. ; Falkenberg, S. ; Wennekamp, T. (2011): Research on the Optimisation of the Abrasion-Behaviour of Conveyor BeltsKGK - Kautschuk Gummi Kunststoffe. Heidelberg: Hüthing GmbH, 2011. S. 31-34 – ISSN 0984-3276 Weitere Informationen
  • Overmeyer, L.; Furmans, K. (2011): Automatisierung in der Logistik - dezentral und geregeltat-automatisierungstechnik Vol. 59, Nr. 4, S. 207-210: Oldenbourg Verlag, 2011.
    DOI: 10.1524/auto.2011.9088
  • Overmeyer, L.; Neumeister, A.; Kling, R. (2011): Direct precision manufacturing of three-dimensional components using organically modified ceramicsCIRP Annals - Manufacturing Technology Vol. 60, Nr. 1, S. 267 - 270, 2011.
    DOI: 10.1016/j.cirp.2011.03.067
  • Salfeld, V.; Krimm, R.; Matthias, T.; Behrens, B.-A. (2011): Investigation on the Process-Machine Interaction by Forming Parts with Sheet-Bulk Metal FormingJournal “Proceedings in Manufacturing Systems”, Vol. 6 / Issue 2, pp. 97-100, ISSN 2067-9238 | Datei |
  • Schmidt, M.; Münzberg, B.; Nyhuis, P. (2011): Logistisches Controlling von Montageprozessen – ein modellbasierter Ansatz zur EffizienzsteigerungWerkstattstechnik online 101 (9), S. 574-579
  • Schulz, L.; Overmeyer, L.; Ziller, T. (2011): Novel Splice Vulcanizing Presses with Optimized Heating and Pressure CharacteristicsBulk Solids Handling, Mining Special. Würzburg: Vogel Business Media, 31 (2011) Nr. 4. S. 216-221 – ISSN 0173-9980
  • Sellmeier, V., Denkena, B.: (2011): Stable islands in the stability chart of milling processes due to unequal tooth pitchInternational Journal of Machine Tools & Manufacture, 51 (2011), S. 152-164. | Datei |
  • Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. (2011): Adjustment of Design Limited Imperfections for Transportation Vehicles, The 14th International ESAFORM Conference on Material Forming, Queen’s University Belfast, Northern Ireland - United Kingdom, April 27-29, 2011, AIP Conf. Proc. 1353, pp. 1638-1643, doi: 10.1063/1.3589751, American Institute of Physics 978-0-7354-0911-8.
  • Voges-Schwieger, K; Hübner, S.;Behrens, B.-A. (2011): Low Temperature Sheet Forming, The 14th International ESAFORM Conference on Material Forming, Queen’s University Belfast, Northern Ireland - United Kingdom, April 27-29, 2011, AIP Conf. Proc. 1353, pp. 224-228, doi: 10.1063/1.3589519, American Institute of Physics 978-0-7354-0911-8.
  • Waizy, H., Weizbauer, A., Maibaum, M., Witte, F., Windhagen, H., Lucas, A., Denkena, B., Meyer-Lindenberg A., Thorey, F.: (2011): Biomechanical characterisation of a degradable magnesium-based (MgCa0.8) screwJournal of Materials Science: Materials in Medicine, Official Journal of the European Society for Biomaterials, Published online 31. December 2011, DOI 10.1007/s10856-011-4544-8, 7 Seiten. | Datei |
  • Weckenmann, A.; Behrens, B.-A.; Reithmeier, E.; Akkasoglu, G.; Vucetic, M.; Ohrt, C.; Cahyono, T.; Hübner, S.; Kästner,M. (2011): "Appliance of the Maturity Method in the Development of Endoscopic Geometry Inspection for Sheet-Bulk Metal Forming Tools." Vol. 39, No.1, 2011, pp. 11-16, ISSN 2217-5776
  • Wirts-Rütters, M., Schneider, B., Denkena, B., Konopatzki, B., Wloka, R.: (2011): Wärmearmes Fügen von segmentierten Werkzeugen mit Hilfe der Klebetechnik.HTM J. Heat. Treatm. Mat. 66 (2011) 1, S. 1-8. | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Götze, T. (2010): Consideration of Fundamental Influence Parameters for the Simulation of Sheet-Metal Forming Processes by means of Plastic Melt Pressure, Materials Science and Engineering Technology, Vol. 41, Heft 10, S. 839-843, 2010 | Datei |
  • Behrens, B.-A.; Denkena, B.; Charlin, F.; Dannenberg, M. (2010): Evolutionäre Optimierung einer Schmiedeprozesskette, wt Werkstattstechnik online, Jg. 100 (2010), H. 10, S. 798 – 803, Springer-VDI-Verlag, Düsseldorf. | Datei |
  • Behrens, B.-A.; Dilger, K.; Wisner, G.; Rosenberger, J. (2010): Locally Reinforced Hydro Bonded Blanks. In: Journal for Technology of Plasticity, Vol. 35(2010), Number 1-2. S. 1-10. ISSN: 03543870 | Datei |
  • Behrens, B.-A.; El Nadi, T.; Krimm, R. (2010): Simulation einer Richtmaschine mit biegsamen Richtrollen; wt Werkstattstechnik online, 10-2010, Seite 812-816, SPRINGER-VDI-VERLAG. | Datei |
  • Behrens, B.-A.; Gastan, E.; Vahed, N.; Lange, F. (2010): Numerical Analysis of the Process Chain for the Production of PM Components with Integrated Information Storage, Production Engineering - Research and Development, vol. 4 (2010), no. 5, pp. 477- 482, ISSN 0944-6524 (printed), ISSN 1863-7353 (online), Springer-Verlag, Berlin Heidelberg, June 2010 (online first), September 2010 (printed/online) | Datei |
  • Behrens, B.-A.; Odening, D. (2010): Material Influence on Shrinkage Behaviour of Precision-Forged Parts, steel research international, Volume 81, Number 9, pp. 350-353, ISBN 978-3-514-00774-1, September 2010. | Datei |
  • Behrens, B.-A.; Vahed, N.; Gastan, E. (2010): Application of tool vibration in die pressing of Ti-powder, Production Engineering: Volume 4, Issue 6 (2010), p. 545-551 | Datei |
  • Behrens, B.-A.; Voges-Schwieger, K,; Bouguecha, A.; Knigge, J.; Weilandt, K.; Hübner, S. (2010): Local Strain Hardening of Metal Components by Means of Martensite Generation, Advanced Materials Research Vol. 137, 2010, pp. 1-33, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.137.1 | Datei |
  • Bouzakis, A.; Overmeyer, L. (2010): Package Localization in a Warehouse Environment by Means of RFIDat-automatisierungstechnik, Nr. 7, S. 402-410. München: Oldenbourg Verlag, 2010.
    DOI: 10.1524/auto.2010.0851
  • de Payrebrune, K. M., Kröger, M., Deichmüller, M., Denkena, B.: (2010): Investigation on the Dynamics of Tool GrindingMachine Dynamics Problems, Volume 33, No 2, S. 92-104.
  • Denkena, B., Behrens, B.-A., Charlin, F., Dannenberg, M.: (2010): Evolutionäre Optimierung einer Schmiedeprozesskette.wt Werkstattstechnik online, 100 (2010) H. 10, S. 798-803. | Datei |
  • Denkena, B., Blümel, P., Kröning, S.: (2010): Simulationsbasierte Instandhaltung. Optimierung der Instandhaltungsplanung und -steuerung mit Hilfe ereignisorientierter Simulation. wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 598-603. | Datei |
  • Denkena, B., Breidenstein, B., de Leon, L., Dege, J.: (2010): Development of Combined Manufacturing Technologies for High-Strength Structural Components.Advanced Materials Research, Vol. 137 (2010), S. 219-246. | Datei |
  • Denkena, B., de Leon, L., Behrens, L.: (2010): Contact conditions in 5-axis-grinding of double curved surfaces with toric grinding wheels.Advanced Materials Research, Vols. 126-128 (2010), S. 41-46. | Datei |
  • Denkena, B., de Leon, L., Hahmann, D.: (2010): Großflächiges Schleifen von Mikrostrukturen.wt Werkstattstechnik online, 100 (2010) H. 6, S. 487-493. | Datei |
  • Denkena, B., de Leon, L., Köhler, J.: (2010): Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature.Production Engineering Research and Development (WGP), Volume 4 (2010) Number 5, S. 457-464.
  • Denkena, B., de Leon, L., Köhler, J.: (2010): Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature.Production Engineering Research and Development (WGP), Volume 4 (2010) Number 5, S. 457-464.
  • Denkena, B., de Leon, L., Seiffert, F.: (2010): Process Influences in the Wire Cutting of Concrete.Advanced Materials Research, Vols. 126-128 (2010), S. 70-76. | Datei |
  • Denkena, B., de Leon, L., Turger, A., Behrens, L.: (2010): Prediction of contact conditions and theoretical roughness in manufacturing of complex implants by toric grinding tools.International Journal of Machine Tools & Manufacture, Vol. 50 (2010) Issue 7, S. 630-636. | Datei |
  • Denkena, B., Eikötter, M., Nyhuis, P., Wulf, S., Klemke, T.: (2010): Softwareunterstützung zur Erstellung integrativer Roadmaps. Synchronisation von Fabrik-, Technologie- und Produktplanung.wt Werkstattstechnik online, 100 (2010) H. 4, S. 226-233. | Datei |
  • Denkena, B., Eikötter, M., Schürmeyer, J., Goesmann, R., Apmann, H., Lünemann, M.: (2010): Technologieplanung und -bewertung mittels Prozesskettensimulation. Total Cost and Benefit of Ownership innerhalb der Produktion der Premium Aerotec GmbH. wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 638-643. | Datei |
  • Denkena, B., Erkens, G., Breidenstein, B.: (2010): Residual Stress in PVD-Coated Carbide Cutting Inserts - Applications of the sin2psi and the Scattering Vector Method. Materials Science Forum, Vols. 638-642, S. 2383-2388. | Datei |
  • Denkena, B., Henning, H., Lorenzen, L.-E.: (2010): Genetics and intelligence: new approaches in production engineering.Production Engineering Research and Development (WGP), Volume 4 (2010) Number 1, S. 65-73. | Datei |
  • Denkena, B., Henning, H.: (2010): Model-based Framework for dimensioning multistage grinding processesInnovative Production Machines and Systems, S. 272-273.
  • Denkena, B., Hogger, S., Charlin, F.: (2010): "Durchgängiges Datenmanagement System" für die Instandsetzung von Triebwerkskomponenten.wt Werkstattstechnik online, 100 (2010) H. 3, S. 169-174. | Datei |
  • Denkena, B., Kästner, J., Wang, B.: (2010): Advanced microstructures and its production through cutting and grinding.CIRP Annals - Manufacturing Technology, 59 (2010) 1, S. 67-72. | Datei |
  • Denkena, B., Koehler, J., Moral, A.: (2010): Ductile and brittle material removal mechanisms in natural nacre - A model for novel implant materials.Journal of Materials Processing Technology, 210 (2010), S. 1827-1837. | Datei |
  • Denkena, B., Köhler, J., Wang, B., Krawczyk, T.: (2010): Schleifen funktionalisierter Oberflächen.wt Werkstattstechnik online, 100 (2010) H. 11/12, S. 826-831. | Datei |
  • Denkena, B., Köhler, J.: (2010): Consideration of the Form of the Undeformed Section of Cut in the Calculation of Machining Forces.Machining Science and Technology, 14 /2010, S. 455-470.
  • Denkena, B., Köller, M., Röders, G.: (2010): Virtual Prototyping in Werkzeug- und Formenbau. Optimierungspotenziale identifizieren und Zielkonflikte visualisieren.wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 612-616. | Datei |
  • Denkena, B., Möhring, H.-C., Acker, W., Zaretskiy, E.: (2010): Optical Quality Control of High-Strength Structures.Advanced Materials Research, Vol. 137 (2010), S. 295-316. | Datei |
  • Denkena, B., Möhring, H.C., Gümmer, Oliver: (2010): Hochdynamische ruckentkoppelte Werkzeugmaschine. Prototyp einer hochdynamischen Werkzeugmaschine mit innovativer Ruckentkopplungstechnologie.wt Werkstattstechnik online, 100 (2010) H. 1/2, S. 99-104. | Datei |
  • Denkena, B., Schmidt, C., Krüger, M.: (2010): Experimental investigation and modeling of thermal and mechanical influences on shape deviations in machining structural parts.International Journal of Machine Tools & Manufacture, Vol. 50 (2010) Issue 11, S. 1015-1021. | Datei |
  • Denkena, B., Schürmeyer, J., Eikötter, M.: (2010): Planung und Bewertung von Druckgussformen. Integration technologischer, prozess- und organisationsbezogener Aspekte in die Investitionsplanung und Bewertung. wt Werkstattstechnik online, 100 (2010) H. 4, S. 298-303. | Datei |
  • Denkena, B.; Eikötter, M.; Nyhuis, P.; Wulf, S.; Klemke, T. (2010): Softwareunterstützung zur Erstellung integrativer RoadmapsWerkstattstechnik online 100 (4), S. 226-233
  • Guldbakke, J. M.; Chmielus, M.; Rolfs, K.; Schneider, R.; Müllner, P.; Raatz, A. (2010): Magnetic, mechanical and fatigue properties of a Ni45.4Mn29.1Ga21.6Fe3.9 single crystalin: Scripta Materialia, Elsevier, 2010, Vol. 62 (11), pp. 875-878
    ISBN: 1359-6462
  • Lohse, H.; Marthiens, O.; Helduser, S.; Matthias, T.; Behrens, B.-A. (2010): Reglerauslegung für hydraulische Tiefziehpressen, Ölhydraulik und Pneumatik, 3/2010/März, S. 2-9, Vereinigte Fachverlage GmbH, Mainz, März 2010 | Datei |
  • Möhring, H.-C., Litwinski, K.M., Gümmer, Olaf: (2010): Process monitoring with sensory machine tool components.CIRP Annals - Manufacturing Technology, Vol. 59 (2010) 1, S. 383-386. | Datei |
  • Nyhuis, P.; Heinen, T.; Noenning, T.; Schulze, J. R. (2010): Kommunikationsgestaltung in Fabriken. Methode zur Beherrschung schnittstellenübergreifender Kommunikationsbeziehungen in FabrikenWerkstattstechnik online 100 (4), Seite 254-258
  • Nyhuis, P.; Wulf, S.; Klemke, T.; Hirsch, B. (2010): Integrative factory, technology, and product planning - systemizing the information transfer on the operational levelProduction Engineering - Research and Development 4 (2), pp. 231-237
  • Overmeyer, L.; Dreyer, J.; Altmann, D. (2010): Data mining based configuration of cyclically interlinked production systemsCIRP Annals - Manufacturing Technology, Vol. 59, Nr. 1, S. 493 - 496, 2010.
    DOI: 10.1016/j.cirp.2010.03.081
  • Overmeyer, L.; Dumke, M.; Heiserich, G.; Franke, S.; Schulz, L. (2010): Power Transmission by Optical Fibers for Component Inherent CommunicationJournal of Systemics, Cybernetics and Informatics Vol. 8, S. 55-60, 2010.
  • Overmeyer, L.; Schulz, L. (2010): Kennzeichnungstechnologien zum wirksamen Schutz gegen ProduktpiraterieBand 2 der Reihe "Innovationen gegen Produktpiraterie" Vol. 2, S. 112-126. Frankfurt am Main: VDMA Verlag, 2010.
    ISBN: 978-3-8163-0602-3
  • Overmeyer, L.; Ventz, K.; Falkenberg, S.; Krühn, T. (2010): Interfaced multidirectional small-scaled modules for intralogistics operationsLogistics Research Vol. 2, S. 123-133: Springer Berlin / Heidelberg
    DOI: 10.1007/s12159-010-0038-1
  • Pisla, D.; Plitea, N.; Vaida, C.; Hesselbach, J.; Raatz, A.; Vlad, L.; Graur, F.; Gyurka, B.; Gherman, B.; Suciu, M.<